The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Influence of Aspect Ratio of TiO2 Nanorods on the Photocatalytic Decomposition of Formic Acid
Open accessAbstract
A variety of shape-controlled TiO 2 nanoparticles, such as spheres, short ellipsoidal rods with a low aspect ratio (low AR), and long ellipsoidal rods with a high aspect ratio (high AR), were synthesized by a gel−sol method. X-ray diffractometer and ultraviolet diffuse reflectance spectroscopy analyses revealed that the synthesized TiO 2 nanoparticles have the same anatase structure with a band-gap energy ( E g ) of 3.2 eV regardless of nanoparticle shape. Electrochemical impedance spectroscopy (EIS) results showed that the increasing aspect ratio of TiO 2 nanoparticles was accompanied by increases in the charge-transfer rate between nanoparticle surfaces and electrolyte, the space charge capacitance on the surface of TiO 2 nanoparticles, and electrochemical double-layer capacitance at the interfacial region of the electrolyte. The amount of electron donors in the nanoparticles increased with increasing aspect ratio of nanoparticles, which is in good agreement with EIS results. Use of high-AR ellipsoidal TiO 2 nanoparticles as photocatalysts resulted in enhanced current density and, consequently, an increase in the photocatalytic decomposition rate of formic acid.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Near Monodisperse TiO2 Nanoparticles and Nanorods
Li, X., Peng, Q., Yi, J., Wang, X., & Li, Y. (2006) · Chemistry – A European Journal · doi:10.1002/chem.200500893 · Cited by 175
Self-citation
Cited by
TiO2 photocatalysis: Design and applications
Nakata, K., & Fujishima, A. (2012) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2012.06.001 · Cited by 3,651
Advanced Nanoarchitectures for Solar Photocatalytic Applications
Kubacka, A., Fernández-García, M., & Colón, G. (2012) · Chemical Reviews · doi:10.1021/cr100454n · Cited by 2,373
Effect of aspect ratio and surface defects on the photocatalytic activity of ZnO nanorods
Zhang, X., Qin, J., Xue, Y., Yu, P., Zhang, B., Wang, L., & Liu, R. (2014) · Scientific Reports · doi:10.1038/srep04596 · Cited by 1,018
TiO2 photocatalyst for water treatment applications
Lee, S.-Y., & Park, S.-J. (2013) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2013.07.012 · Cited by 992
Mesoporous Anatase Titania Hollow Nanostructures though Silica‐Protected Calcination
Joo, J. B., Zhang, Q., Lee, I., Dahl, M., Zaera, F., & Yin, Y. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101927 · Cited by 433
Self-citationMetal Oxide Charge Transport Layers for Efficient and Stable Perovskite Solar Cells
Shin, S. S., Lee, S. J., & Seok, S. I. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900455 · Cited by 283
Self-assembly and photocatalysis of mesoporous TiO2 nanocrystal clusters
Zhang, Q., Joo, J.-B., Lu, Z., Dahl, M., Oliveira, D. Q. L., Ye, M., & Yin, Y. (2011) · Nano Research · doi:10.1007/s12274-010-0058-9 · Cited by 144
Self-citation
Metadata
- Authors
- Yun, H. J., Lee, H., Joo, J. B., Kim, W., & Yi, J.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-02-03
- Volume
- 113
- Issue
- 8
- Pages
- 3050-3055
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2038132462
- Cited by
- 184
- References
- 1
- FWCI
- 5.92
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.