Synthesis of Pt@Cu Core−Shell Nanoparticles by Galvanic Displacement of Cu by Pt4+Ions and Their Application as Electrocatalysts for Oxygen Reduction Reaction in Fuel Cells
The DOI matches its Crossref record.
Abstract
Carbon-supported Pt@Cu “core−shell” nanoparticles with Pt−Cu alloy core and Pt shell have been synthesized by a galvanic displacement of Cu by Pt 4+ at ambient conditions, followed by a leaching out of unreacted Cu on the surface by treating with 9 M H 2 SO 4 . X-ray diffraction (XRD) data indicate the formation of a Pt−Cu alloy below the Pt shell. Energy dispersive spectroscopic (EDS) analysis in a scanning electron microscope (SEM) reveals that the experimental Cu content is much lower than the initial nominal Cu content, confirming the displacement of a significant amount of Cu by Pt. X-ray photoelectron spectroscopic (XPS) studies indicate surface enrichment by Pt. Cyclic voltammetry (CV) and rotating disk electrode (RDE) measurements demonstrate an enhanced catalytic activity for the oxygen reduction reaction (ORR) for optimum Pt@Cu compositions compared to that found with commercial Pt catalyst, both per unit mass of Pt and per unit active surface area basis. Moreover, the surface area specific activities of the Pt@Cu samples increase linearly with increasing initial nominal Cu content. The increase in activity for ORR is ascribed to an electronic modification of the outer Pt shell by the Pt−Cu core.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Still being checked.
Cited by
Wang, Y.-J., Zhao, N., Fang, B., Li, H., Bi, X. T., & Wang, H. (2015) · Chemical Reviews · doi:10.1021/cr500519c · Cited by 1,267
On the Role of Metals in Nitrogen‐Doped Carbon Electrocatalysts for Oxygen Reduction
Masa, J., Xia, W., Muhler, M., & Schuhmann, W. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201500569 · Cited by 653
Tuning the Activity of Pt(111) for Oxygen Electroreduction by Subsurface Alloying
Stephens, I. E. L., Bondarenko, A. S., Perez-Alonso, F. J., Calle-Vallejo, F., Bech, L., Johansson, T. P., Jepsen, A. K., Frydendal, R., Knudsen, B. P., Rossmeisl, J., et al. (2011) · Journal of the American Chemical Society · doi:10.1021/ja111690g · Cited by 526
Pt-Based Core–Shell Catalyst Architectures for Oxygen Fuel Cell Electrodes
Oezaslan, M., Hasché, F., & Strasser, P. (2013) · The Journal of Physical Chemistry Letters · doi:10.1021/jz4014135 · Cited by 391
Hu, Y., Zhang, H., Wu, P., Zhang, H., Zhou, B., & Cai, C. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp01998d · Cited by 264
Metadata
- Authors
- Sarkar, A., & Manthiram, A.
- Affiliations
- The University of Texas at Austin (US)
- Corresponding author
- Manthiram, A.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-03-18
- Volume
- 114
- Issue
- 10
- Pages
- 4725-4732
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2016708153
- Cited by
- 224
- References
- 0
- Citations by year
- 2026: 4 · 2025: 5 · 2024: 3 · 2023: 9 · 2022: 7 · 2021: 11 · 2020: 9 · 2019: 15 · 2018: 20 · 2017: 17 · 2016: 21 · 2015: 26 · 2014: 22 · 2013: 13 · 2012: 20
- FWCI
- 8.20
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- The Journal of Physical Chemistry C (publishedVersion)
- Topics
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Catalytic Processes in Materials Science
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Keywords
- galvanic replacement, oxygen reduction reaction, electrocatalysts, fuel cells, PtCu alloy, carbon-supported nanoparticles, sulfuric acid leaching, electronic structure modulation, mass-specific activity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.