The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Probing Adsorption, Pore Condensation, and Hysteresis Behavior of Pure Fluids in Three-Dimensional Cubic Mesoporous KIT-6 Silica
Abstract
In order to investigate the details of the process of pore condensation and hysteresis mechanisms in three-dimensional (3-D) pore networks, we performed a systematic study of the adsorption and pore condensation behavior of N 2 (77.4 K) and Ar (77.4 and 87.3 K) in a 3-D ordered pore system, i.e., cubic Ia 3̅ d mesoporous KIT-6 silica materials with mode pore diameters ranging from ca. 5 nm up to 11 nm. KIT-6 silica is a porous material composed of two intertwined mesoporous subnetworks similar as in MCM-48, but this material can be prepared with much larger mean pore diameters. Accurate pore size analysis was performed by X-ray diffraction modeling and by state-of the art application of nonlocal density functional theory (NLDFT) on N 2 (77.4 K) and Ar (87.3 K) sorption data. Furthermore, our data suggest that the width of the adsorption/desorption hysteresis loop observed for 3-D KIT-6 silica can be narrower as compared to that of pseudo-one-dimensional SBA-15 silica of the same pore size (i.e., in the pore diameter range from 6 to 8 nm). This specific behavior correlates well with the existence of the highly interconnected 3-D pore network of the KIT-6 material. Moreover, the results of our investigations are also consistent with previous observations that the SBA-15 pore system becomes more and more interconnected with increasing aging temperatures, i.e., SBA-15 changes from being a material with a pseudo-one-dimensional mesopore system to a material exhibiting a three-dimensional pore system resembling KIT-6 silica. These results provide new insights into the effects of pore interconnectivity on pore condensation and hysteresis behavior in both KIT-6 and SBA-15 silica materials and enable a more thorough understanding of the pore structure and textural properties of these materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Characterization of the porous structure of sba-15
Kruk, M., Jaroniec, M., Ko, C. H., & Ryoo, R. (2000) · Chemistry of Materials · doi:10.1021/cm000164e · Cited by 1,409
Cited by
Density functional theory methods for characterization of porous materials
Landers, J., Gor, G. Y., & Neimark, A. V. (2013) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2013.01.007 · Cited by 1,239
Physical adsorption characterization of nanoporous materials: progress and challenges
Thommes, M., & Cychosz, K. A. (2014) · Adsorption · doi:10.1007/s10450-014-9606-z · Cited by 767
Self-citationSchlumberger, C., & Thommes, M. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202002181 · Cited by 536
Self-citationBai, B., Arandiyan, H., & Li, J. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2013.05.056 · Cited by 516
Protocol for the Nanocasting Method: Preparation of Ordered Mesoporous Metal Oxides
Deng, X., Chen, K., & Tüysüz, H. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b02645 · Cited by 264
Metadata
- Authors
- Kleitz, F., Bérubé, F., Guillet-Nicolas, R., Yang, C.-M., & Thommes, M.
- Venue
- The Journal of Physical Chemistry C
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-05-03
- Volume
- 114
- Issue
- 20
- Pages
- 9344-9355
- ISSN
- 1932-7447 (ISSN-L)
- 1932-7455
- OpenAlex
- W2017567086
- Cited by
- 223
- References
- 2
- FWCI
- 6.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.