The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Colloidal Inks for Directed Assembly of 3-D Periodic Structures
Abstract
Mesoscale periodic structures have been fabricated via directed assembly of colloidal inks. Concentrated colloidal gels with tailored viscoelastic properties were designed to form self-supporting features. The inks were deposited in a layer-by-layer sequence to directly write the desired 3-D pattern. Periodic structures with spanning features that vary between ∼100 μm and 1 mm were assembled. Shear rate profiles were calculated on the basis of the measured rheological properties of the inks under slip and no-slip boundary conditions during flow through a cylindrical deposition nozzle. Deflection measurements of spanning elements were used to probe the relationship between gel strength, deposition speed, and shear rate profiles in the nozzle. These observations revealed that the ink adopted a rigid (gel) core−fluid shell architecture during assembly, which simultaneously facilitated bonding and shape retention of the deposited elements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Konsistenzmessungen von Gummi-Benzollösungen
Herschel, W. H., & Bulkley, R. (1926) · Kolloid-Zeitschrift · doi:10.1007/bf01432034 · Cited by 1,499
Colloidal Processing of Ceramics
Lewis, J. A. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01560.x · Cited by 1,371
Self-citationThree-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Reddy, T. Y. (1985) · Journal of Mechanical Working Technology · doi:10.1016/0378-3804(85)90010-5 · Cited by 663
Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., Williams, P., Brancazio, D., & Cornie, J. (1992) · Journal of Engineering for Industry · doi:10.1115/1.2900701 · Cited by 573
Hydroxyapatite implants with designed internal architecture
Chu, T. G., Halloran, J. W., Hollister, S. J., et al. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1011203226053 · Cited by 236
Volume-fraction dependence of elastic moduli and transition temperatures for colloidal silica gels
Grant, M. C., & Russel, W. B. (1993) · Physical Review E · doi:10.1103/physreve.47.2606 · Cited by 236
Chrisey, D. B. (2000) · Science · doi:10.1126/science.289.5481.879 · Cited by 227
Buscall, R., McGowan, J. I., & Morton‐Jones, A. J. (1993) · Journal of Rheology · doi:10.1122/1.550387 · Cited by 213
Rheological behavior of a concentrated suspension: A solid rocket fuel simulant
Kalyon, D. M., Yaras, P., Aral, B., & Yilmazer, U. (1993) · Journal of Rheology · doi:10.1122/1.550435 · Cited by 203
Hertel, P., Fagerquist, M. V., & Svensson, T. H. (1999) · Science · doi:10.1126/science.286.5437.105 · Cited by 169
Morissette, S. L., Lewis, J. A., Clem, P. G., et al. (2001) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2001.tb01036.x · Cited by 114
Self-citationElastic properties of flocculated networks
Sonntag, R. C., & Russel, W. B. (1987) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(87)90144-5 · Cited by 93
Cited by
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Self-citation3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Self-citationDirect Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Metadata
- Authors
- Smay, J. E., Cesarano, J., & Lewis, J. A.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-06-14
- Volume
- 18
- Issue
- 14
- Pages
- 5429-5437
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2050280377
- Cited by
- 700
- References
- 13
- FWCI
- 8.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.