The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Colloidal Inks for Directed Assembly of 3-D Periodic Structures
Abstract
Mesoscale periodic structures have been fabricated via directed assembly of colloidal inks. Concentrated colloidal gels with tailored viscoelastic properties were designed to form self-supporting features. The inks were deposited in a layer-by-layer sequence to directly write the desired 3-D pattern. Periodic structures with spanning features that vary between ∼100 μm and 1 mm were assembled. Shear rate profiles were calculated on the basis of the measured rheological properties of the inks under slip and no-slip boundary conditions during flow through a cylindrical deposition nozzle. Deflection measurements of spanning elements were used to probe the relationship between gel strength, deposition speed, and shear rate profiles in the nozzle. These observations revealed that the ink adopted a rigid (gel) core−fluid shell architecture during assembly, which simultaneously facilitated bonding and shape retention of the deposited elements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Konsistenzmessungen von Gummi-Benzollösungen
Herschel, W. H., & Bulkley, R. (1926) · Kolloid-Zeitschrift · doi:10.1007/bf01432034 · Cited by 1,499
Colloidal Processing of Ceramics
Lewis, J. A. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01560.x · Cited by 1,371
Self-citationThree-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Reddy, T. Y. (1985) · Journal of Mechanical Working Technology · doi:10.1016/0378-3804(85)90010-5 · Cited by 663
Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., Williams, P., Brancazio, D., & Cornie, J. (1992) · Journal of Engineering for Industry · doi:10.1115/1.2900701 · Cited by 573
Hydroxyapatite implants with designed internal architecture
Chu, T. G., Halloran, J. W., Hollister, S. J., et al. (2001) · Journal of Materials Science Materials in Medicine · doi:10.1023/a:1011203226053 · Cited by 236
Volume-fraction dependence of elastic moduli and transition temperatures for colloidal silica gels
Grant, M. C., & Russel, W. B. (1993) · Physical Review E · doi:10.1103/physreve.47.2606 · Cited by 236
Chrisey, D. B. (2000) · Science · doi:10.1126/science.289.5481.879 · Cited by 227
Buscall, R., McGowan, J. I., & Morton‐Jones, A. J. (1993) · Journal of Rheology · doi:10.1122/1.550387 · Cited by 213
Rheological behavior of a concentrated suspension: A solid rocket fuel simulant
Kalyon, D. M., Yaras, P., Aral, B., & Yilmazer, U. (1993) · Journal of Rheology · doi:10.1122/1.550435 · Cited by 203
Cited by
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Self-citation3D printing of ceramics: A review
Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,109
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Self-citationDirect Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
A review of trends and limitations in hydrogel-rapid prototyping for tissue engineering
Billiet, T., Vandenhaute, M., Schelfhout, J., Van Vlierberghe, S., & Dubruel, P. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2012.04.050 · Cited by 1,284
Omnidirectional Printing of Flexible, Stretchable, and Spanning Silver Microelectrodes
Ahn, B. Y., Duoss, E. B., Motala, M. J., Guo, X., Park, S.-I., Xiong, Y., Yoon, J., Nuzzo, R. G., Rogers, J. A., & Lewis, J. A. (2009) · Science · doi:10.1126/science.1168375 · Cited by 1,191
Self-citationAdditive Manufacturing of Ceramics: Issues, Potentialities, and Opportunities
Zocca, A., Colombo, P., Gomes, C. M., & Günster, J. (2015) · Journal of the American Ceramic Society · doi:10.1111/jace.13700 · Cited by 1,115
Multistable Architected Materials for Trapping Elastic Strain Energy
Shan, S., Kang, S. H., Raney, J. R., Wang, P., Fang, L., Candido, F., Lewis, J. A., & Bertoldi, K. (2015) · Advanced Materials · doi:10.1002/adma.201501708 · Cited by 986
Self-citationAdditive Manufacturing of Ceramic‐Based Materials
Travitzky, N., Bonet, A., Dermeik, B., Fey, T., Filbert‐Demut, I., Schlier, L., Schlordt, T., & Greil, P. (2014) · Advanced Engineering Materials · doi:10.1002/adem.201400097 · Cited by 878
Magnetic Soft Materials and Robots
Kim, Y., & Zhao, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00481 · Cited by 873
Additive manufacturing of advanced ceramic materials
Lakhdar, Y., Tuck, C., Binner, J., Terry, A., & Goodridge, R. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100736 · Cited by 857
Direct Ink Writing of Three‐Dimensional Ceramic Structures
Lewis, J. A., Smay, J. E., Stuecker, J., & Cesarano, J. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01382.x · Cited by 823
Self-citationChaotic mixing in three-dimensional microvascular networks fabricated by direct-write assembly
Therriault, D., White, S. R., & Lewis, J. A. (2003) · Nature Materials · doi:10.1038/nmat863 · Cited by 707
Self-citationWagoner Johnson, A. J., & Herschler, B. A. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.07.012 · Cited by 635
Topology Optimized Architectures with Programmable Poisson's Ratio over Large Deformations
Clausen, A., Wang, F., Jensen, J. S., Sigmund, O., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201502485 · Cited by 551
Self-citation3D Graphene Materials: From Understanding to Design and Synthesis Control
Sun, Z., Fang, S., & Hu, Y. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00083 · Cited by 543
Direct writing in three dimensions
Lewis, J. A., & Gratson, G. M. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00344-x · Cited by 507
Self-citation3D Printing of Emulsions and Foams into Hierarchical Porous Ceramics
Minas, C., Carnelli, D., Tervoort, E., & Studart, A. R. (2016) · Advanced Materials · doi:10.1002/adma.201603390 · Cited by 507
Scaffolding Strategies for Tissue Engineering and Regenerative Medicine Applications
Pina, S., Ribeiro, V. P., Marques, C. F., Maia, F. R., Silva, T. H., Reis, R. L., & Oliveira, J. M. (2019) · Materials · doi:10.3390/ma12111824 · Cited by 493
Linking Rheology and Printability for Dense and Strong Ceramics by Direct Ink Writing
M’Barki, A., Bocquet, L., & Stevenson, A. (2017) · Scientific Reports · doi:10.1038/s41598-017-06115-0 · Cited by 471
Emerging Ceramic-based Materials for Dentistry
Denry, I., & Kelly, J. R. (2014) · Journal of Dental Research · doi:10.1177/0022034514553627 · Cited by 464
Butscher, A., Bohner, M., Hofmann, S., Gauckler, L., & Müller, R. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.09.039 · Cited by 459
Rheological characterisation of ceramic inks for 3D direct ink writing: A review
del-Mazo-Barbara, L., & Ginebra, M.-P. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.031 · Cited by 444
Orangi, J., Hamade, F., Davis, V. A., & Beidaghi, M. (2020) · ACS Nano · doi:10.1021/acsnano.9b07325 · Cited by 443
Long range interactions in nanoscale science
French, R. H., Parsegian, V. A., Podgornik, R., Rajter, R. F., Jagota, A., Luo, J., Asthagiri, D., Chaudhury, M. K., Chiang, Y.-M., Granick, S., et al. (2010) · Reviews of Modern Physics · doi:10.1103/revmodphys.82.1887 · Cited by 441
Self-citation3D printing of bacteria into functional complex materials
Schaffner, M., Rühs, P. A., Coulter, F., Kilcher, S., & Studart, A. R. (2017) · Science Advances · doi:10.1126/sciadv.aao6804 · Cited by 425
Additive manufacturing of biologically-inspired materials
Studart, A. R. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00836k · Cited by 415
Stable propagation of mechanical signals in soft media using stored elastic energy
Raney, J. R., Nadkarni, N., Daraio, C., Kochmann, D. M., Lewis, J. A., & Bertoldi, K. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1604838113 · Cited by 397
Self-citationLi, Y.-C., Zhang, Y. S., Akpek, A., Shin, S. R., & Khademhosseini, A. (2016) · Biofabrication · doi:10.1088/1758-5090/9/1/012001 · Cited by 385
Robocasting of structural ceramic parts with hydrogel inks
Feilden, E., Blanca, E. G.-T., Giuliani, F., Saiz, E., & Vandeperre, L. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.03.001 · Cited by 378
Ice-templating, freeze casting: Beyond materials processing
Deville, S. (2013) · Journal of Materials Research · doi:10.1557/jmr.2013.105 · Cited by 376
Shahzad, A., & Lazoglu, I. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109249 · Cited by 372
Direct 3D Printing of Ultralight Graphene Oxide Aerogel Microlattices
Jiang, Y., Xu, Z., Huang, T., Liu, Y., Guo, F., Xi, J., Gao, W., & Gao, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201707024 · Cited by 370
Computer-aided design and fabrication of dental restorations
Strub, J. R., Rekow, E. D., & Witkowski, S. (2006) · The Journal of the American Dental Association · doi:10.14219/jada.archive.2006.0389 · Cited by 362
Three‐Dimensional Nanostructures for Photonics
von Freymann, G., Ledermann, A., Thiel, M., Staude, I., Essig, S., Busch, K., & Wegener, M. (2010) · Advanced Functional Materials · doi:10.1002/adfm.200901838 · Cited by 352
Ceramic Robocasting: Recent Achievements, Potential, and Future Developments
Peng, E., Zhang, D., & Ding, J. (2018) · Advanced Materials · doi:10.1002/adma.201802404 · Cited by 347
Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks
Hardin, J. O., Ober, T. J., Valentine, A. D., & Lewis, J. A. (2015) · Advanced Materials · doi:10.1002/adma.201500222 · Cited by 340
Self-citationDirect Ink Writing Based 4D Printing of Materials and Their Applications
Wan, X., Luo, L., Liu, Y., & Leng, J. (2020) · Advanced Science · doi:10.1002/advs.202001000 · Cited by 337
Direct ink writing advances in multi-material structures for a sustainable future
Rocha, V. G., Saiz, E., Tirichenko, I. S., & García-Tuñón, E. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04181e · Cited by 327
Bone tissue engineering scaffolding: computer-aided scaffolding techniques
Thavornyutikarn, B., Chantarapanich, N., Sitthiseripratip, K., Thouas, G. A., & Chen, Q. (2014) · Progress in Biomaterials · doi:10.1007/s40204-014-0026-7 · Cited by 325
Biomedical production of implants by additive electro-chemical and physical processes
Bartolo, P., Kruth, J.-P., Silva, J., Levy, G., Malshe, A., Rajurkar, K., Mitsuishi, M., Ciurana, J., & Leu, M. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.005 · Cited by 321
Lewicki, J. P., Rodriguez, J. N., Zhu, C., Worsley, M. A., Wu, A. S., Kanarska, Y., Horn, J. D., Duoss, E. B., Ortega, J. M., Elmer, W., et al. (2017) · Scientific Reports · doi:10.1038/srep43401 · Cited by 318
Active mixing of complex fluids at the microscale
Ober, T. J., Foresti, D., & Lewis, J. A. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509224112 · Cited by 306
Self-citationSintering and robocasting of β-tricalcium phosphate scaffolds for orthopaedic applications
Miranda, P., Saiz, E., Gryn, K., & Tomsia, A. P. (2006) · Acta Biomaterialia · doi:10.1016/j.actbio.2006.02.004 · Cited by 304
Printing in Three Dimensions with Graphene
García‐Tuñon, E., Barg, S., Franco, J., Bell, R., Eslava, S., D'Elia, E., Maher, R. C., Guitian, F., & Saiz, E. (2015) · Advanced Materials · doi:10.1002/adma.201405046 · Cited by 303
Fabricating complex three-dimensional nanostructures with high-resolution conformable phase masks
Jeon, S., Park, J.-U., Cirelli, R., Yang, S., Heitzman, C. E., Braun, P. V., Kenis, P. J. A., & Rogers, J. A. (2004) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0403048101 · Cited by 303
Mechanical properties of calcium phosphate scaffolds fabricated by robocasting
Miranda, P., Pajares, A., Saiz, E., Tomsia, A. P., & Guiberteau, F. (2008) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.31587 · Cited by 301
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Raney, J. R., Compton, B. G., Mueller, J., Ober, T. J., Shea, K., & Lewis, J. A. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1715157115 · Cited by 301
Self-citationGates, B. D. (2009) · Science · doi:10.1126/science.1171230 · Cited by 284
Direct ink writing of energy materials
Tagliaferri, S., Panagiotopoulos, A., & Mattevi, C. (2021) · Materials Advances · doi:10.1039/d0ma00753f · Cited by 281
Environmental science and engineering applications of nanocellulose-based nanocomposites
Wei, H., Rodriguez, K., Renneckar, S., & Vikesland, P. J. (2014) · Environ. Sci.: Nano · doi:10.1039/c4en00059e · Cited by 277
Concentrated hydroxyapatite inks for direct-write assembly of 3-D periodic scaffolds
Michna, S., Wu, W., & Lewis, J. A. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2005.02.040 · Cited by 266
Self-citationSintering of micro-trusses created by extrusion-3D-printing of lunar regolith inks
Taylor, S. L., Jakus, A. E., Koube, K. D., Ibeh, A. J., Geisendorfer, N. R., Shah, R. N., & Dunand, D. C. (2018) · Acta Astronautica · doi:10.1016/j.actaastro.2017.11.005 · Cited by 125
Soliman, A., AlAmoodi, N., Karanikolos, G. N., Doumanidis, C. C., & Polychronopoulou, K. (2020) · Nanomaterials · doi:10.3390/nano10112198 · Cited by 53
Metadata
- Authors
- Smay, J. E., Cesarano, J., & Lewis, J. A.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-06-14
- Volume
- 18
- Issue
- 14
- Pages
- 5429-5437
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2050280377
- Cited by
- 700
- References
- 13
- FWCI
- 8.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.