The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Adhesion Forces between Glass and Silicon Surfaces in Air Studied by AFM: Effects of Relative Humidity, Particle Size, Roughness, and Surface Treatment
Abstract
Using the atomic force microscope (AFM), the pull-off forces between flat glass or silicon surfaces and silicon AFM tips or glass microspheres of different sizes have been extensively studied as a function of relative humidity (RH) in the range 5−90%, as model systems for the behavior of cohesive powders. The glass and silicon substrates were treated to render them either hydrophobic or hydrophilic. All the hydrophilic surfaces gave simple force curves and pull-off forces increasing uniformly with RH. Small contacts ( R ∼ 20 nm) gave pull-off forces close to values predicted by simple Laplace−Kelvin theory (∼20 nN), but the values with microspheres ( R ∼ 20 μm) fell well below predictions for sphere−flat or sphere−sphere geometry, due to roughness and asperity contacts. The hydrophobic silicon surfaces also exhibited simple behavior, with no significant RH dependence. The pull-off force again fell well below predicted values (Johnson−Kendall−Roberts contact mechanics theory) for the larger contacts. Hydrophobic glass gave similar adhesion to silicon over most of the RH range, but against both silicon tips and glass microspheres, there was an anomalously large adhesion in the RH range 20−40%, accompanied by a long-range noncontact force. The adhesion on fully hydrophilic surfaces and its RH dependence can be mostly explained by current theories of capillary bridges, but the interpretation is complicated by the sensitivity of theoretical predictions to contact geometry (and hence to roughness effects) and by uncertainties in the thickness of adsorbed water layers. The anomalous behavior on hydrophobic glass surfaces at intermediate values of RH is not fully understood, but possible causes are (1) dipole layers in the partially formed water film, giving rise to patch charges and long-range forces, or (2) fixed charges at a reactive glass surface, involving specific bonding reactions. The results may be useful in explaining the behavior of cohesive powders with different coatings or those which show a large humidity dependence (e.g., zeolites) or show electrostatic charging effects (e.g., silica aerogels).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Intermolecular and Surface Forces
(2011) · Elsevier eBooks · doi:10.1016/c2011-0-05119-0 · Cited by 8,968
Force-distance curves by atomic force microscopy
Cappella, B., & Dietler, G. (1999) · Surface Science Reports · doi:10.1016/s0167-5729(99)00003-5 · Cited by 1,694
Experimental studies on the applicability of the Kelvin equation to highly curved concave menisci
Fisher, L. R., & Israelachvili, J. N. (1981) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(81)90212-5 · Cited by 345
Influence of capillary condensation of water on nanotribology studied by force microscopy
Binggeli, M., & Mate, C. M. (1994) · Applied Physics Letters · doi:10.1063/1.113020 · Cited by 285
Wetting and Capillary Phenomena of Water on Mica
Xu, L., Lio, A., Hu, J., Ogletree, D. F., & Salmeron, M. (1998) · The Journal of Physical Chemistry B · doi:10.1021/jp972289l · Cited by 278
Zimon, A. D. (1982) · Springer eBooks · doi:10.1007/978-1-4615-8576-3 · Cited by 207
Christenson, H. K. (1988) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(88)90420-1 · Cited by 193
Interparticle force conferred by capillary-condensed liquid at contact points
Coughlin, R. W., Elbirli, B., & Vergara‐Edwards, L. (1982) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(82)90368-x · Cited by 30
Cited by
The physics of wind-blown sand and dust
Kok, J. F., Parteli, E. J. R., Michaels, T. I., & Karam, D. B. (2012) · Reports on Progress in Physics · doi:10.1088/0034-4885/75/10/106901 · Cited by 1,608
Awaja, F., Gilbert, M., Kelly, G., Fox, B., & Pigram, P. J. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.04.007 · Cited by 928
Adhesion phenomena in bonded joints
Baldan, A. (2012) · International Journal of Adhesion and Adhesives · doi:10.1016/j.ijadhadh.2012.04.007 · Cited by 531
Fundamental studies on dust fouling effects on PV module performance
Said, S. A. M., & Walwil, H. M. (2014) · Solar Energy · doi:10.1016/j.solener.2014.05.048 · Cited by 303
Surface Forces Apparatus Measurements of Interactions between Rough and Reactive Calcite Surfaces
Dziadkowiec, J., Javadi, S., Bratvold, J. E., Nilsen, O., & Røyne, A. (2018) · Langmuir · doi:10.1021/acs.langmuir.8b00797 · Cited by 52
Metadata
- Authors
- Jones, R., Pollock, H. M., Cleaver, J. A. S., & Hodges, C. S.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-09-14
- Volume
- 18
- Issue
- 21
- Pages
- 8045-8055
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2052328784
- Cited by
- 370
- References
- 8
- FWCI
- 10.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Adhesion Forces between Glass and Silicon Surfaces in Air Studied by AFM: Effects of Relative Humidity, Particle Size, Roughness, and Surface Treatment. https://app.cochat.ai/papers/10.1021/la0259196
- The paper
- Jones, R., Pollock, H. M., Cleaver, J. A. S., & Hodges, C. S. (2002). Adhesion Forces between Glass and Silicon Surfaces in Air Studied by AFM: Effects of Relative Humidity, Particle Size, Roughness, and Surface Treatment. Langmuir. https://doi.org/10.1021/la0259196
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.