The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Preparation of Honeycomb-Patterned Polyimide Films by Self-Organization
Abstract
Microporous polymer films are attractive materials with potential application in the fields of electronics, photonics, and biotechnology. Chemical and thermal stabilities of the microporous polymer films are required for their materials application. Besides preparation by conventional photolithography, we have reported that honeycomb-patterned porous polymer films are prepared by a method utilizing the condensation of small water droplets on solutions of amphiphilic copolymers. Here, we show preparation of honeycomb-patterned microporous films of a thermally and chemically stable material, polyimide. A water-template-assisted honeycomb structure was formed from a polyion complex of polyamic acids and dialkylammonium salt. The pore size of films was controlled by the casting volume of polymer solution. The patterned polyion complex film converted into polyimide by simple chemical treatment, keeping the porous structure. Self-supporting microporous polyimide films are fabricated. The honeycomb-structured film has high thermal and chemical stability like that of conventional cast films of polyimides.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organically modified aluminosilicate mesostructures from block copolymer phases
Templin, M., Franck, A., Du Chesne, A., Leist, H., Zhang, Y., Ulrich, R., Schädler, V., & Wiesner, U. (1997) · Science · doi:10.1126/science.278.5344.1795 · Cited by 668
Cited by
Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation
Zhang, Q., Yang, X., Li, P., Huang, G., Feng, S., Shen, C., Han, B., Zhang, X., Jin, F., Xu, F., et al. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.05.001 · Cited by 836
Single-Step Fabrication of Transparent Superhydrophobic Porous Polymer Films
Yabu, H., & Shimomura, M. (2005) · Chemistry of Materials · doi:10.1021/cm051281i · Cited by 375
Self-citationSun, F., Zhou, H., & Lee, J. (2011) · Acta Biomaterialia · doi:10.1016/j.actbio.2011.07.002 · Cited by 310
Kim, J. K., Basavaraja, C., Umashankar, M., & Huh, D. S. (2016) · Polymer · doi:10.1016/j.polymer.2016.01.052 · Cited by 11
Metadata
- Authors
- Yabu, H., Tanaka, M., Ijiro, K., & Shimomura, M.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-06-14
- Volume
- 19
- Issue
- 15
- Pages
- 6297-6300
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2069106979
- Cited by
- 242
- References
- 1
- FWCI
- 18.60
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
