The DOI matches its Crossref record.
Controlled Clustering and Enhanced Stability of Polymer-Coated Magnetic Nanoparticles
Abstract
The clustering and stability of magnetic nanoparticles coated with random copolymers of acrylic acid, styrenesulfonic acid, and vinylsulfonic acid has been studied. Clusters larger than 50 nm are formed when the coatings are made using too low or too high molecular weight polymers or using insufficient amounts of polymer. Low-molecular-weight polymers result in thin coatings that do not sufficiently screen van der Waals attractive forces, while high-molecular-weight polymers bridge between particles, and insufficient polymer results in bare patches on the magnetite surface. The stability of the resulting clusters is poor, but when an insufficient polymer is used as primary coating, and a secondary polymer is added to coat remaining bare magnetite, the clusters are stable in high salt concentrations (>5 M NaCl), while retaining the necessary cluster size for efficient magnetic recovery. The magnetite cores were characterized by TEM and vibrating sample magnetometry, while the clusters were characterized by dynamic light scattering. The clustering and stability are interpreted in terms of the particle-particle interaction forces, and the optimal polymer size can be predicted well on the basis of these forces and the solution structure and hydrophobicity of the polymer. The size of aggregates formed by limited polymer can be predicted with a diffusion-limited colloidal aggregation model modified with a sticking probability based on fractional coating of the magnetite cores.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Ghosh Chaudhuri, R., & Paria, S. (2012) · Chemical Reviews · doi:10.1021/cr100449n · Cited by 3,614
Magnetic Soft Materials and Robots
Kim, Y., & Zhao, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00481 · Cited by 873
He, F., Zhao, D., Liu, J., & Roberts, C. B. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0610896 · Cited by 663
He, F., & Zhao, D. (2007) · Environmental Science & Technology · doi:10.1021/es0705543 · Cited by 591
Polymer-assisted fabrication of nanoparticles and nanocomposites
Rozenberg, B. A., & Tenne, R. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.07.004 · Cited by 545
Review on thermal properties of nanofluids: Recent developments
Angayarkanni, S. A., & Philip, J. (2015) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2015.08.014 · Cited by 492
Functionalization of Monodisperse Magnetic Nanoparticles
Lattuada, M., & Hatton, T. A. (2007) · Langmuir · doi:10.1021/la062092x · Cited by 467
Self-citationManganese ferrite nanoparticle micellar nanocomposites as MRI contrast agent for liver imaging
Lu, J., Ma, S., Sun, J., Xia, C., Liu, C., Wang, Z., Zhao, X., Gao, F., Gong, Q., Song, B., et al. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.02.001 · Cited by 359
Fundamentals and application of magnetic particles in cell isolation and enrichment: a review
Plouffe, B. D., Murthy, S. K., & Lewis, L. H. (2015) · Reports on Progress in Physics · doi:10.1088/0034-4885/78/1/016601 · Cited by 334
Kolen’ko, Y. V., Bañobre-López, M., Rodríguez-Abreu, C., Carbó-Argibay, E., Sailsman, A., Piñeiro-Redondo, Y., Cerqueira, M. F., Petrovykh, D. Y., Kovnir, K., Lebedev, O. I., et al. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp500816u · Cited by 287
Novel magnetic nanomaterials inspired by magnetotactic bacteria: Topical review
Prozorov, T., Bazylinski, D. A., Mallapragada, S. K., & Prozorov, R. (2013) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2013.04.002 · Cited by 137
Metadata
- Authors
- Ditsch, A., Laibinis, P. E., Wang, D. I. C., & Hatton, T. A.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-05-18
- Volume
- 21
- Issue
- 13
- Pages
- 6006-6018
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W1982005616
- Cited by
- 248
- References
- 0
- FWCI
- 8.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.