The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Wetting of Regularly Structured Gold Surfaces
Abstract
In this study we report results for a systematic study of the wetting of structured gold surfaces formed by electrodeposition through monolayer templates of close-packed uniform submicrometer spheres. Removal of the template after deposition leaves a regular hexagonal array of sphere segment pores where the depth of the pores and, thus, the topography of the surface are controlled by the thickness of gold deposited through the template. We find that, as the thickness of the porous film increases up to the radius of the pores, the apparent contact angle for water on the surface increases from 70 degrees on the flat surface to more that 130 degrees , and then with increasing thickness above the radius of the pores the apparent contact angle decreases back toward 70 degrees . We show that these changes in the apparent contact angle agree with the model of Cassie and Baxter for nonwetted surfaces even though the gold itself is hydrophilic. We also show that the apparent contact angle is independent of the diameter of the pores over the range 400-800 nm. This is the first reported example showing the change of a hydrophilic surface (theta; < 90 degrees ) into a hydrophobic surface (theta; > 90 degrees ) purely by control of the surface topography. The role of the pore shape and size in stabilizing the nonwetting (Cassie-Baxter) droplet on the surface is discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Cited by
Design and Creation of Superwetting/Antiwetting Surfaces
Feng, X. J., & Jiang, L. (2006) · Advanced Materials · doi:10.1002/adma.200501961 · Cited by 2,030
Bhushan, B., & Jung, Y. C. (2011) · Progress in Materials Science · doi:10.1016/j.pmatsci.2010.04.003 · Cited by 1,989
Progess in superhydrophobic surface development
Roach, P., Shirtcliffe, N. J., & Newton, M. I. (2008) · Soft Matter · doi:10.1039/b712575p · Cited by 1,615
Ma, M., & Hill, R. M. (2006) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2006.06.002 · Cited by 1,287
A review on self-cleaning coatings
Ganesh, V. A., Raut, H. K., Nair, A. S., & Ramakrishna, S. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12523k · Cited by 725
Metadata
- Authors
- Abdelsalam, M. E., Bartlett, P. N., Kelf, T., & Baumberg, J.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-01-21
- Volume
- 21
- Issue
- 5
- Pages
- 1753-1757
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W1975322389
- Cited by
- 244
- References
- 1
- FWCI
- 9.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.