The DOI matches its Crossref record.
Hydrothermal Routes To Prepare Nanocrystalline Mesoporous SnO2 Having High Thermal Stability
Abstract
We report simple hydrothermal routes to prepare thermally stable SnO2 particles having high specific surface areas and mesoporosity. The preparation method includes a new combination of synthetic processes: hydrolysis of tin(IV) chloride at 95 degrees C in the absence of alkaline solutions (aqueous NH3 or NaOH), formation of nanocrystalline SnO2, and subsequent hydrothermal treatments at temperatures between 100 and 200 degrees C. After annealing treatments of the hydrothermally treated SnO2 particles at 400 or 500 degrees C, their crystallite sizes remained smaller than 7.7 nm and their specific surface areas were still higher than 110 m2/g, indicative of the high thermal stability against particle growth and sintering. Furthermore, mesoporosity evolved with a relatively narrow pore size distribution typically in the range of 3.0-4.3 nm. The effects of the hydrothermal treatment were explained by uniformization of the particle size that was beneficial to the suppression of particle growth.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
SnO2: A comprehensive review on structures and gas sensors
Das, S., & Jayaraman, V. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2014.06.003 · Cited by 1,226
Metal Oxide Nanostructures and Their Gas Sensing Properties: A Review
Sun, Y.-F., Liu, S.-B., Meng, F.-L., Liu, J.-Y., Jin, Z., Kong, L.-T., & Liu, J.-H. (2012) · Sensors · doi:10.3390/s120302610 · Cited by 1,218
Liu, Y., Zhang, P., Sun, N., Anasori, B., Zhu, Q., Liu, H., Gogotsi, Y., & Xu, B. (2018) · Advanced Materials · doi:10.1002/adma.201707334 · Cited by 759
Hydrothermal Synthesis of SnO2 Nanoparticles and Their Gas-Sensing of Alcohol
Chiu, H.-C., & Yeh, C.-S. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp0688355 · Cited by 392
Liang, C., Kim, B., Yang, S., Yang Liu, Y. L., Francisco Woellner, C., Li, Z., Vajtai, R., Yang, W., Wu, J., Kenis, P. J. A., et al. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta01367e · Cited by 124
Metadata
- Authors
- Fujihara, S., Maeda, T., Ohgi, H., Hosono, E., Imai, H., & Kim, S.-H.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-06-24
- Volume
- 20
- Issue
- 15
- Pages
- 6476-6481
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2022293533
- Cited by
- 182
- References
- 0
- FWCI
- 3.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.