The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Inkjet Printing of Well-Defined Polymer Dots and Arrays
Abstract
Inkjet printing represents a highly promising polymer deposition method, which is used for, for example, the fabrication of multicolor polyLED displays and polymer-based electronics parts. The challenge is to print well-defined polymer structures from dilute solution. We have eliminated the formation of ring stains by printing nonvolatile acetophenone-based inks on a perfluorinated substrate using different polymers. (De)pinning of the contact line of the printed droplet, as related to the choice of solvent, is identified as the key factor that determines the shape of the deposit, whereas the choice of polymer is of minor importance. Adding 10 wt % or more of acetophenone to a volatile solvent (ethyl acetate)-based polymer solution changes the shape of the deposit from ring-like to dot-like, which may be due to the establishment of a solvent composition gradient. Arrays of closely spaced dots have also been printed. The size of the dots is considerably smaller than the nozzle diameter. This may prove a potential strategy for the inkjet printing of submicrometer structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The theory of polymer dynamics
Doi, M., & Edwards, S. F. (1986) · Cited by 12,020
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
High-Resolution Inkjet Printing of All-Polymer Transistor Circuits
Sirringhaus, H., Kawase, T., Friend, R. H., Shimoda, T., Inbasekaran, M., Wu, W., & Woo, E. P. (2000) · Science · doi:10.1126/science.290.5499.2123 · Cited by 3,311
Contact line deposits in an evaporating drop
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (2000) · Physical Review E · doi:10.1103/physreve.62.756 · Cited by 2,300
Inkjet Printing of Polymers: State of the Art and Future Developments
de Gans, B. ‐., Duineveld, P. C., & Schubert, U. S. (2004) · Advanced Materials · doi:10.1002/adma.200300385 · Cited by 1,906
Self-citationInkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Pattern formation in drying drops
Deegan, R. D. (2000) · Physical Review E · doi:10.1103/physreve.61.475 · Cited by 1,297
Dewetting of conducting polymer inkjet droplets on patterned surfaces
Wang, J. Z., Zheng, Z. H., Li, H. W., Huck, W. T. S., & Sirringhaus, H. (2004) · Nature Materials · doi:10.1038/nmat1073 · Cited by 583
Self-Aligned, Vertical-Channel, Polymer Field-Effect Transistors
Stingelin, N., Friend, R. H., & Sirringhaus, H. (2003) · Science · doi:10.1126/science.1081279 · Cited by 563
Block Copolymer Thermoplastic Elastomers for Microcontact Printing
Trimbach, D. C., Feldman, K., Spencer, N. D., et al. (2003) · Langmuir · doi:10.1021/la035214j · Cited by 72
Cited by
Derby, B. (2010) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070909-104502 · Cited by 1,984
Materials and Applications for Large Area Electronics: Solution-Based Approaches
Arias, A. C., MacKenzie, J. D., McCulloch, I., Rivnay, J., & Salleo, A. (2010) · Chemical Reviews · doi:10.1021/cr900150b · Cited by 1,733
Tobjörk, D., & Österbacka, R. (2011) · Advanced Materials · doi:10.1002/adma.201004692 · Cited by 1,287
Gate Dielectrics for Organic Field‐Effect Transistors: New Opportunities for Organic Electronics
Facchetti, A., Yoon, M. ‐., & Marks, T. J. (2005) · Advanced Materials · doi:10.1002/adma.200500517 · Cited by 1,032
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Self-citation
Metadata
- Authors
- de Gans, B.-J., & Schubert, U. S.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-07-30
- Volume
- 20
- Issue
- 18
- Pages
- 7789-7793
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2094352043
- Cited by
- 499
- References
- 10
- FWCI
- 14.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.