The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Evaluation of the BET Method for Determining Surface Areas of MOFs and Zeolites that Contain Ultra-Micropores
Abstract
The BET analysis is commonly used for determining surface areas of metal-organic frameworks (MOFs) and zeolites that contain "ultra-micropores" (<7 A) even though it is often stated that the BET surface areas obtained for such small pores are not really meaningful in an absolute sense. In this study, nitrogen and argon isotherms in MOFs and zeolites (most of them having ultra-micropores) were predicted by grand canonical Monte Carlo (GCMC) simulations and used as pseudoexperimental data to evaluate the BET method for these structures. The BET surface areas calculated from the simulated nitrogen and argon isotherms agree well with the accessible surface areas obtained directly from crystal structures in a geometric fashion. However, this was only true when the BET analysis was performed using the appropriate pressure range based on published "consistency criteria"; the BET analysis underestimates the surface areas of all the selected MOFs and zeolites if it is done in the "standard" BET pressure range. Moreover, the BET theory was shown to work well for a zeolite with a highly heterogeneous surface. These results validate the application of the BET method for determining surface areas of MOFs and zeolites even for materials having ultra-micropores or heterogeneous pores.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
The properties of gases and liquids
(2001) · Choice Reviews Online · doi:10.5860/choice.38-5036 · Cited by 12,958
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Adsorption surface area and porosity
Steele, W. A. (1983) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(83)90305-3 · Cited by 7,928
DREIDING: a generic force field for molecular simulations
Mayo, S. L., Olafson, B. D., & Goddard, W. A. (1990) · The Journal of Physical Chemistry · doi:10.1021/j100389a010 · Cited by 6,585
Principles of adsorption and adsorption processes
Klein, G. (1985) · Reactive Polymers, Ion Exchangers, Sorbents · doi:10.1016/0167-6989(85)90037-6 · Cited by 2,109
Vapor–liquid equilibria of mixtures containing alkanes, carbon dioxide, and nitrogen
Potoff, J. J., & Siepmann, J. I. (2001) · AIChE Journal · doi:10.1002/aic.690470719 · Cited by 2,073
Rowsell, J. L. C., & Yaghi, O. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056639q · Cited by 1,841
Exceptional H2 Saturation Uptake in Microporous Metal−Organic Frameworks
Wong-Foy, A. G., Matzger, A. J., & Yaghi, O. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja058213h · Cited by 1,281
Is the bet equation applicable to microporous adsorbents?
(2007) · Studies in Surface Science and Catalysis · doi:10.1016/s0167-2991(07)80008-5 · Cited by 1,147
Cited by
Guidelines for the use and interpretation of adsorption isotherm models: a review
Al-Ghouti, M. A., & Da'ana, D. A. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.122383 · Cited by 3,535
Chung, Y. G., Haldoupis, E., Bucior, B. J., Haranczyk, M., Lee, S., Zhang, H., Vogiatzis, K. D., Milisavljevic, M., Ling, S., Camp, J. S., et al. (2019) · Journal of Chemical & Engineering Data · doi:10.1021/acs.jced.9b00835 · Cited by 863
Self-citationSarkisov, L., & Harrison, A. (2011) · Molecular Simulation · doi:10.1080/08927022.2011.592832 · Cited by 658
A Series of Isoreticular, Highly Stable, Porous Zirconium Oxide Based Metal–Organic Frameworks
Guillerm, V., Ragon, F., Dan‐Hardi, M., Devic, T., Vishnuvarthan, M., Campo, B., Vimont, A., Clet, G., Yang, Q., Maurin, G., et al. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201204806 · Cited by 499
High-throughput computational screening of metal–organic frameworks
Colón, Y. J., & Snurr, R. Q. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00070f · Cited by 470
Self-citation
Metadata
- Authors
- Bae, Y.-S., Yazaydın, A. Ö., & Snurr, R. Q.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-03-22
- Volume
- 26
- Issue
- 8
- Pages
- 5475-5483
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W1963643295
- Cited by
- 342
- References
- 24
- FWCI
- 6.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Evaluation of the BET Method for Determining Surface Areas of MOFs and Zeolites that Contain Ultra-Micropores. https://app.cochat.ai/papers/10.1021/la100449z
- The paper
- Bae, Y.-S., Yazaydın, A. Ö., & Snurr, R. Q. (2010). Evaluation of the BET Method for Determining Surface Areas of MOFs and Zeolites that Contain Ultra-Micropores. Langmuir. https://doi.org/10.1021/la100449z
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
