The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
CO2/H2O Adsorption Equilibrium and Rates on Metal−Organic Frameworks: HKUST-1 and Ni/DOBDC
Abstract
Metal-organic frameworks (MOFs) have recently attracted intense research interest because of their permanent porous structures, huge surface areas, and potential applications as novel adsorbents and catalysts. In order to provide a basis for consideration of MOFs for removal of carbon dioxide from gases containing water vapor, such as flue gas, we have studied adsorption equilibrium of CO(2), H(2)O vapor, and their mixtures and also rates of CO(2) adsorption in two MOFs: HKUST-1 (CuBTC) and Ni/DOBDC (CPO-27-Ni or Ni/MOF-74). The MOFs were synthesized via solvothermal methods, and the as-synthesized products were solvent exchanged and regenerated before experiments. Pure component adsorption equilibria and CO(2)/H(2)O binary adsorption equilibria were studied using a volumetric system. The effects of H(2)O adsorption on CO(2) adsorption for both MOF samples were determined, and the results for 5A and NaX zeolites were included for comparison. The hydrothermal stabilities for the two MOFs over the course of repetitive measurements of H(2)O and CO(2)/H(2)O mixture equilibria were also studied. CO(2) adsorption rates from helium for the MOF samples were investigated by using a unique concentration-swing frequency response (CSFR) system. Mass transfer into the MOFs is rapid with the controlling resistance found to be macropore diffusion, and rate parameters were established for the mechanism.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Functional Porous Coordination Polymers
Kitagawa, S., Kitaura, R., & Noro, S. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200300610 · Cited by 11,071
Design and synthesis of an exceptionally stable and highly porous metal-organic framework
Li, H., Eddaoudi, M., O'Keeffe, M., & Yaghi, O. M. (1999) · Nature · doi:10.1038/46248 · Cited by 8,554
Eddaoudi, M., Kim, J., Rosi, N., Vodak, D., Wachter, J., O'Keeffe, M., & Yaghi, O. M. (2002) · Science · doi:10.1126/science.1067208 · Cited by 8,132
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
A route to high surface area, porosity and inclusion of large molecules in crystals
Materials Design and Discovery Group, Chae, H. K., Siberio-Pérez, D. Y., Kim, J., Go, Y., Eddaoudi, M., Matzger, A. J., O'Keeffe, M., & Yaghi, O. M. (2004) · Nature · doi:10.1038/nature02311 · Cited by 2,816
(1974) · CERN Document Server (European Organization for Nuclear Research) · Cited by 2,468
Metal–organic frameworks—prospective industrial applications
Mueller, U., Schubert, M., Teich, F., Puetter, H., Schierle-Arndt, K., & Pastré, J. (2006) · J. Mater. Chem. · doi:10.1039/b511962f · Cited by 2,325
Rowsell, J. L. C., & Yaghi, O. M. (2006) · Journal of the American Chemical Society · doi:10.1021/ja056639q · Cited by 1,841
Caskey, S. R., Wong-Foy, A. G., & Matzger, A. J. (2008) · Journal of the American Chemical Society · doi:10.1021/ja8036096 · Cited by 1,815
Hydrogen Sorption in Functionalized Metal−Organic Frameworks
Rowsell, J. L. C., Millward, A. R., Park, K. S., & Yaghi, O. M. (2004) · Journal of the American Chemical Society · doi:10.1021/ja049408c · Cited by 1,326
Cited by
Water Stability and Adsorption in Metal–Organic Frameworks
Burtch, N. C., Jasuja, H., & Walton, K. S. (2014) · Chemical Reviews · doi:10.1021/cr5002589 · Cited by 2,730
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
Water adsorption in MOFs: fundamentals and applications
Canivet, J., Fateeva, A., Guo, Y., Coasne, B., & Farrusseng, D. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00078a · Cited by 1,444
Metal–Organic Frameworks for Water Harvesting from Air
Kalmutzki, M. J., Diercks, C. S., & Yaghi, O. M. (2018) · Advanced Materials · doi:10.1002/adma.201704304 · Cited by 772
Porous materials for carbon dioxide separations
Siegelman, R. L., Kim, E. J., & Long, J. R. (2021) · Nature Materials · doi:10.1038/s41563-021-01054-8 · Cited by 722
CO2capture and conversion using Mg-MOF-74 prepared by a sonochemical method
Yang, D.-A., Cho, H.-Y., Kim, J., Yang, S.-T., & Ahn, W.-S. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02234b · Cited by 585
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Kizzie, A. C., Wong-Foy, A. G., & Matzger, A. J. (2011) · Langmuir · doi:10.1021/la200547k · Cited by 473
Metal–organic frameworks for upgrading biogas via CO2 adsorption to biogas green energy
Chaemchuen, S., Kabir, N. A., Zhou, K., & Verpoort, F. (2013) · Chemical Society Reviews · doi:10.1039/c3cs60244c · Cited by 416
CO2 adsorption and catalytic application of Co-MOF-74 synthesized by microwave heating
Cho, H.-Y., Yang, D.-A., Kim, J., Jeong, S.-Y., & Ahn, W.-S. (2012) · Catalysis Today · doi:10.1016/j.cattod.2011.08.019 · Cited by 381
Saha, D., Grappe, H. A., Chakraborty, A., & Orkoulas, G. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00745 · Cited by 316
Microwave synthesis and characterization of MOF-74 (M=Ni, Mg) for gas separation
Wu, X., Bao, Z., Yuan, B., Wang, J., Sun, Y., Luo, H., & Deng, S. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.06.023 · Cited by 314
Siegelman, R. L., Milner, P. J., Kim, E. J., Weston, S. C., & Long, J. R. (2019) · Energy & Environmental Science · doi:10.1039/c9ee00505f · Cited by 203
Davarpanah, E., Armandi, M., Hernández, S., Fino, D., Arletti, R., Bensaid, S., & Piumetti, M. (2020) · Journal of Environmental Management · doi:10.1016/j.jenvman.2020.111229 · Cited by 125
Metadata
- Authors
- Liu, J., Wang, Y., Benin, A. I., Jakubczak, P., Willis, R. R., & LeVan, M. D.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-08-13
- Volume
- 26
- Issue
- 17
- Pages
- 14301-14307
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2084977165
- Cited by
- 444
- References
- 41
- FWCI
- 14.37
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.