The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Highly Transparent Superhydrophobic Surfaces from the Coassembly of Nanoparticles (≤100 nm)
Abstract
We report a simple and versatile approach to creating a highly transparent superhydrophobic surface with dual-scale roughness on the nanoscale. 3-Aminopropyltrimethoxysilane (APTS)-functionalized silica nanoparticles of two different sizes (100 and 20 nm) were sequentially dip coated onto different substrates, followed by thermal annealing. After hydrophobilization of the nanoparticle film with (heptadecafluoro-1,1,2,2-tetrahydrodecyl)trichlorosilane for 30 min or longer, the surface became superhydrophobic with an advancing water contact angle of greater than 160° and a water droplet (10 μL) roll-off angle of less than 5°. The order of nanoparticles dip coated onto the silicon wafer (i.e., 100 nm first and 20 nm second or vice versa) did not seem to have a significant effect on the resulting apparent water contact angle. In contrast, when the substrate was dip coated with monoscale nanoparticles (20, 50, and 100 nm), a highly hydrophobic surface (with an advancing water contact angle of up to 143°) was obtained, and the degree of hydrophobicity was found to be dependent on the particle size and concentration of the dip-coating solution. UV-vis spectra showed nearly 100% transmission in the visible region from the glass coated with dual-scale nanoparticles, similar to the bare one. The coating strategy was versatile, and superhydrophobicity was obtained on various substrates, including Si, glass, epoxy resin, and fabrics. Thermal annealing enhanced the stability of the nanoparticle coating, and superhydrophobicity was maintained against prolonged exposure to UV light under ambient conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Cited by
Superhydrophobic surfaces: a review on fundamentals, applications, and challenges
Jeevahan, J., Chandrasekaran, M., Britto Joseph, G., Durairaj, R. B., & Mageshwaran, G. (2018) · Journal of Coatings Technology and Research · doi:10.1007/s11998-017-0011-x · Cited by 628
Transparent, Superhydrophobic Surfaces from One-Step Spin Coating of Hydrophobic Nanoparticles
Xu, L., Karunakaran, R. G., Guo, J., & Yang, S. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201750h · Cited by 327
Self-citationRoles of silanes and silicones in forming superhydrophobic and superoleophobic materials
Li, L., Li, B., Dong, J., & Zhang, J. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta05441b · Cited by 306
Self-assembly of nanostructures towards transparent, superhydrophobic surfaces
Rahmawan, Y., Xu, L., & Yang, S. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00288d · Cited by 299
Self-citation
Metadata
- Authors
- Karunakaran, R. G., Lu, C.-H., Zhang, Z., & Yang, S.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-02-28
- Volume
- 27
- Issue
- 8
- Pages
- 4594-4602
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2318682362
- Cited by
- 234
- References
- 2
- FWCI
- 7.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Highly Transparent Superhydrophobic Surfaces from the Coassembly of Nanoparticles (≤100 nm). https://app.cochat.ai/papers/10.1021/la104067c
- The paper
- Karunakaran, R. G., Lu, C.-H., Zhang, Z., & Yang, S. (2011). Highly Transparent Superhydrophobic Surfaces from the Coassembly of Nanoparticles (≤100 nm). Langmuir. https://doi.org/10.1021/la104067c
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.