The DOI matches its Crossref record.
Supercooled Water Drops Impacting Superhydrophobic Textures
Abstract
Understanding the interaction of supercooled metastable water with superhydrophobic surface textures is of fundamental significance for unraveling the mechanisms of icing as well as of practical importance for the rational development of surface treatment strategies to prevent icing. We investigate the problem of supercooled water drops impacting superhydrophobic textures for drop supercooling down to -17 °C and find that increased viscous effects significantly influence all stages of impact dynamics, in particular, the impact and meniscus impalement behavior, with severe implications to water retention by the textures (sticky versus rebounding drop) and possible icing. Viscous effects in water supercooling conditions cause a reduction of drop maximum spreading (∼25% at an impact speed of 3 m/s for a millimetric drop) and can significantly decrease the drop recoil speed when the meniscus partially penetrates into the texture, leading to an increase of the contact time up to a factor of 2 in supercooling conditions compared to room temperature. We also show that meniscus penetration upon drop impact occurs with full penetration at the center, instead of ring shape, common to room temperature drop impact. To this end, we describe an unobserved mechanism for superhydrophobicity breakdown: unlike for room temperature drops, where transition from bouncing to sticky (impaled) behavior occurs sharply at the condition of full texture penetration, with a bubble captured at the point of impact, under supercooled conditions, the full penetration velocity threshold is increased markedly (increasing by ∼25%, from 2.8 to 3.5 m/s) and no bubble is entrapped. However, even though only partial texture penetration takes place, failure to completely dewet because of viscous effects can still prohibit complete supercooled drop rebound.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Design of anti-icing surfaces: smooth, textured or slippery?
Kreder, M. J., Alvarenga, J., Kim, P., & Aizenberg, J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2015.3 · Cited by 1,505
Icephobic materials: Fundamentals, performance evaluation, and applications
Shen, Y., Wu, X., Tao, J., Zhu, C., Lai, Y., & Chen, Z. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.03.004 · Cited by 441
Superhydrophobic nanocoatings: from materials to fabrications and to applications
Si, Y., & Guo, Z. (2015) · Nanoscale · doi:10.1039/c4nr07554d · Cited by 380
Robust and durable liquid-repellent surfaces
Chen, F., Wang, Y., Tian, Y., Zhang, D., Song, J., Crick, C. R., Carmalt, C. J., Parkin, I. P., & Lu, Y. (2022) · Chemical Society Reviews · doi:10.1039/d0cs01033b · Cited by 378
Physics of Icing and Rational Design of Surfaces with Extraordinary Icephobicity
Schutzius, T. M., Jung, S., Maitra, T., Eberle, P., Antonini, C., Stamatopoulos, C., & Poulikakos, D. (2015) · Langmuir · doi:10.1021/la502586a · Cited by 356
Self-citationZhang, S., Huang, J., Cheng, Y., Yang, H., Chen, Z., & Lai, Y. (2017) · Small · doi:10.1002/smll.201701867 · Cited by 328
Recent progress in the anti-icing performance of slippery liquid-infused surfaces
Heydarian, S., Jafari, R., & Momen, G. (2021) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2020.106096 · Cited by 117
Suppression of Frost Nucleation Achieved Using the Nanoengineered Integral Humidity Sink Effect
Sun, X., & Rykaczewski, K. (2017) · ACS Nano · doi:10.1021/acsnano.6b07505 · Cited by 67
Metadata
- Authors
- Maitra, T., Antonini, C., Tiwari, M. K., Mularczyk, A., Imeri, Z., Schoch, P., & Poulikakos, D.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-09-05
- Volume
- 30
- Issue
- 36
- Pages
- 10855-10861
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2314673047
- Cited by
- 201
- References
- 0
- FWCI
- 4.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.