The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Attenuated Total Reflectance Fourier Transform Infrared Analysis of Fly Ash Geopolymer Gel Aging
Abstract
Structural changes in fly ash geopolymers activated with different sodium hydroxide and silicate concentrations are investigated using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy over a period of 200 days. A strong correlation is found between the concentration of silicate monomer in the activating solution and the position of the main Si-O-T stretching band in the FTIR spectrum, which gives an indication of the relative changes in the gel Si/Al ratio. The FTIR spectra of geopolymer samples with activating solution concentrations of up to 1.2 M SiO2 indicate that an Al-rich gel forms before the final gel composition is reached. The time required for the system to reach a steady gel composition depends on the silicate activating solution concentration and speciation. Geopolymers activated with solutions containing predominantly high-order silicate species rapidly reach a steady gel composition without first forming an Al-rich gel. A minimum silicate monomer concentration of approximately 0.6 M is required to shift the geopolymer synthesis mechanism from hydroxide activation to silicate activation. Silicate speciation in the activating solutions also affects zeolite formation and geopolymer microstructures, with a more homogeneous microstructure and less zeolite formation observed at a higher SiO2 content.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Duxson, P., Provis, J. L., Lukey, G. C., Mallicoat, S. W., Kriven, W. M., & van Deventer, J. S. J. (2005) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2005.06.060 · Cited by 1,807
Self-citationZeolite chemistry and catalysis
(1991) · Applied Catalysis · doi:10.1016/0166-9834(91)85130-n · Cited by 1,603
The hydrothermal synthesis of zeolites: Precursors, intermediates and reaction mechanism
Cundy, C. S., & Cox, P. A. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.02.016 · Cited by 1,590
Duxson, P., Mallicoat, S. W., Lukey, G. C., Kriven, W. M., & van Deventer, J. S. J. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.05.044 · Cited by 907
Self-citationMid-infrared spectroscopic studies of alkali-activated fly ash structure
Fernández-Jiménez, A., & Palomo, A. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.05.057 · Cited by 625
The role played by the reactive alumina content in the alkaline activation of fly ashes
Fernández-Jiménez, A., Palomo, A., Sobrados, I., & Sanz, J. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.11.015 · Cited by 590
Fahrenfort, J. (1961) · Spectrochimica Acta · doi:10.1016/0371-1951(61)80136-7 · Cited by 515
Alkaline Activation of Fly Ashes: NMR Study of the Reaction Products
Palomo, Á., Alonso, S., Fernandez‐Jiménez, A., Sobrados, I., & Sanz, J. (2004) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2004.01141.x · Cited by 463
Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization
Sindhunata, van Deventer, J. S. J., Lukey, G. C., & Xu, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051251p · Cited by 390
Self-citationThe composition range of aluminosilicate geopolymers
Fletcher, R. A., MacKenzie, K. J. D., Nicholson, C. L., & Shimada, S. (2005) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2004.06.001 · Cited by 369
Cited by
Advances in understanding alkali-activated materials
Provis, J. L., Palomo, A., & Shi, C. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2015.04.013 · Cited by 1,537
Self-citationTechnical and commercial progress in the adoption of geopolymer cement
Van Deventer, J. S. J., Provis, J. L., & Duxson, P. (2012) · Minerals Engineering · doi:10.1016/j.mineng.2011.09.009 · Cited by 820
Self-citationDurability of Alkali‐Activated Materials: Progress and Perspectives
Bernal, S. A., & Provis, J. L. (2014) · Journal of the American Ceramic Society · doi:10.1111/jace.12831 · Cited by 547
Self-citationAbdalqader, A. F., Jin, F., & Al-Tabbaa, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.12.010 · Cited by 444
Microstructural changes in alkali activated fly ash/slag geopolymers with sulfate exposure
Ismail, I., Bernal, S. A., Provis, J. L., Hamdan, S., & van Deventer, J. S. J. (2013) · Materials and Structures · doi:10.1617/s11527-012-9906-2 · Cited by 417
Self-citationAn overview of geopolymers derived from industrial by-products
Mehta, A., & Siddique, R. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.09.136 · Cited by 391
Properties and microstructure of alkali-activated red clay brick waste
Reig, L., Tashima, M. M., Borrachero, M. V., Monzó, J., Cheeseman, C. R., & Payá, J. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.01.031 · Cited by 366
Solid-state nuclear magnetic resonance spectroscopy of cements
Walkley, B., & Provis, J. L. (2019) · Materials Today Advances · doi:10.1016/j.mtadv.2019.100007 · Cited by 361
Self-citationGeopolymer-zeolite composites: A review
Rożek, P., Król, M., & Mozgawa, W. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.05.152 · Cited by 361
Effect of Alumina Release Rate on the Mechanism of Geopolymer Gel Formation
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2010) · Chemistry of Materials · doi:10.1021/cm101151n · Cited by 314
Self-citationWaste glass as partial mineral precursor in alkali-activated slag/fly ash system
Zhang, S., Keulen, A., Arbi, K., & Ye, G. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.012 · Cited by 283
The effect of silica availability on the mechanism of geopolymerisation
Hajimohammadi, A., Provis, J. L., & van Deventer, J. S. J. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.02.001 · Cited by 279
Self-citationThe shrinkage of alkali activated fly ash
Ma, Y., & Ye, G. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.10.024 · Cited by 275
Williams, R. P., Hart, R. D., & van Riessen, A. (2011) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2011.04410.x · Cited by 137
Utilization of urea as an accessible superplasticizer on the moon for lunar geopolymer mixtures
Pilehvar, S., Arnhof, M., Pamies, R., Valentini, L., & Kjøniksen, A.-L. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119177 · Cited by 139
Metadata
- Authors
- Rees, C. A., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-06-23
- Volume
- 23
- Issue
- 15
- Pages
- 8170-8179
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2076381612
- Cited by
- 434
- References
- 17
- FWCI
- 40.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.