The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Competing Fracture in Kinetically Controlled Transfer Printing
Abstract
Transfer printing by kinetically switchable adhesion to an elastomeric stamp shows promise as a powerful micromanufacturing method to pickup microstructures and microdevices from the donor substrate and to print them to the receiving substrate. This can be viewed as the competing fracture of two interfaces. This paper examines the mechanics of competing fracture in a model transfer printing system composed of three laminates: an elastic substrate, an elastic thin film, and a viscoelastic member (stamp). As the system is peeled apart, either the interface between the substrate and thin film fails or the interface between the thin film and the stamp fails. The speed-dependent nature of the film/stamp interface leads to the prediction of a critical separation velocity above which separation occurs between the film and the substrate (i.e., pickup) and below which separation occurs between the film and the stamp (i.e., printing). Experiments verify this prediction using films of gold adhered to glass, and the theoretical treatment extends to consider the competing fracture as it applies to discrete micro-objects. Temperature plays an important role in kinetically controlled transfer printing with its influences, making it advantageous to pickup printable objects at the reduced temperatures and to print them at the elevated ones.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Quantum Spin Hall Effect and Topological Phase Transition in HgTe Quantum Wells
Bernevig, B. A., Hughes, T. L., & Zhang, S.-C. (2006) · Science · doi:10.1126/science.1133734 · Cited by 7,090
Fracture Mechanics: Fundamentals and Applications
Anderson, T. L. (2017) · CRC Press eBooks · doi:10.1201/9781315370293 · Cited by 4,737
Transfer printing by kinetic control of adhesion to an elastomeric stamp
Meitl, M. A., Zhu, Z.-T., Kumar, V., Lee, K. J., Feng, X., Huang, Y. Y., Adesida, I., Nuzzo, R. G., & Rogers, J. A. (2006) · Nature Materials · doi:10.1038/nmat1532 · Cited by 1,548
Self-citationOn the characterization of nonlinear viscoelastic materials
Schapery, R. A. (1969) · Polymer Engineering and Science · doi:10.1002/pen.760090410 · Cited by 1,155
Fracture mechanics and the adherence of viscoelastic bodies
Maugis, D., & Barquins, M. (1978) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/11/14/011 · Cited by 658
Effect of Wetting Liquids on the Strength of Adhesion of Viscoelastic Material
Gent, A. N., & Schultz, J. (1972) · The Journal of Adhesion · doi:10.1080/00218467208072199 · Cited by 589
A printable form of silicon for high performance thin film transistors on plastic substrates
Menard, E., Lee, K. J., Khang, D.-Y., Nuzzo, R. G., & Rogers, J. A. (2004) · Applied Physics Letters · doi:10.1063/1.1767591 · Cited by 372
Self-citationAdhesion: Molecules and Mechanics
Kendall, K. (1994) · Science · doi:10.1126/science.263.5154.1720 · Cited by 328
Stamp Collapse in Soft Lithography
Huang, Y. Y., Zhou, W., Hsia, K. J., Menard, E., Park, J.-U., Rogers, J. A., & Alleyne, A. G. (2005) · Langmuir · doi:10.1021/la0502185 · Cited by 224
Self-citationBendable single crystal silicon thin film transistors formed by printing on plastic substrates
Menard, E., Nuzzo, R. G., & Rogers, J. A. (2005) · Applied Physics Letters · doi:10.1063/1.1866637 · Cited by 219
Self-citation
Cited by
Flexible and Stretchable Electronics for Biointegrated Devices
Kim, D.-H., Ghaffari, R., Lu, N., & Rogers, J. A. (2012) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-071811-150018 · Cited by 749
Self-citationFlexible Electronics: Status, Challenges and Opportunities
Corzo, D., Tostado-Blázquez, G., & Baran, D. (2020) · Frontiers in Electronics · doi:10.3389/felec.2020.594003 · Cited by 391
Transfer printing techniques for flexible and stretchable inorganic electronics
Linghu, C., Zhang, S., Wang, C., & Song, J. (2018) · npj Flexible Electronics · doi:10.1038/s41528-018-0037-x · Cited by 357
Zhang, Y., Zheng, N., Cao, Y., Wang, F., Wang, P., Ma, Y., Lu, B., Hou, G., Fang, Z., Liang, Z., et al. (2019) · Science Advances · doi:10.1126/sciadv.aaw1066 · Cited by 314
Self-citationFukuda, K., & Someya, T. (2017) · Advanced Materials · doi:10.1002/adma.201602736 · Cited by 317
Metadata
- Authors
- Feng, X., Meitl, M. A., Bowen, A. M., Huang, Y., Nuzzo, R. G., & Rogers, J. A.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-11-09
- Volume
- 23
- Issue
- 25
- Pages
- 12555-12560
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2160229423
- Cited by
- 411
- References
- 17
- FWCI
- 10.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Competing Fracture in Kinetically Controlled Transfer Printing. https://app.cochat.ai/papers/10.1021/la701555n
- The paper
- Feng, X., Meitl, M. A., Bowen, A. M., Huang, Y., Nuzzo, R. G., & Rogers, J. A. (2007). Competing Fracture in Kinetically Controlled Transfer Printing. Langmuir. https://doi.org/10.1021/la701555n
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.