The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Wetting on Nanoporous Alumina Surface: Transition between Wenzel and Cassie States Controlled by Surface Structure
Abstract
This paper reports a systematic study on the relationship between surface structure and wetting state of ordered nanoporous alumina surface. The wettability of the porous alumina is dramatically changed from hydrophilicity to hydrophobicity by increasing the hole diameter, while maintaining the hole interval and depth. This phenomenon is attributed to the gradual transition between Wenzel and Cassie states which was proved experimentally by comparing the wetting behavior on these porous alumina surfaces. Furthermore, the relationship between surface wettability and hole depth at a fixed hole interval and diameter was investigated. For those porous alumina with relatively larger holes in diameter, transition between Wenzel and Cassie states was also achieved with increasing hole depth. A capillary-pressure balance model was proposed to elucidate the unique structure-induced transition, and the criteria for the design and construction of a Cassie wetting surface was discussed. These structure-induced transitions between Wenzel and Cassie states could provide further insight into the wetting mechanism of roughness-induced wettability and practical guides for the design of variable surfaces with controllable wettability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Cited by
Bio-Inspired Titanium Dioxide Materials with Special Wettability and Their Applications
Liu, K., Cao, M., Fujishima, A., & Jiang, L. (2014) · Chemical Reviews · doi:10.1021/cr4006796 · Cited by 571
Bio-inspired superoleophobic and smart materials: Design, fabrication, and application
Liu, K., Tian, Y., & Jiang, L. (2013) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.11.001 · Cited by 570
Micro- and Nanotopography Sensitive Bacterial Attachment Mechanisms: A Review
Cheng, Y., Feng, G., & Moraru, C. I. (2019) · Frontiers in Microbiology · doi:10.3389/fmicb.2019.00191 · Cited by 367
Feng, G., Cheng, Y., Wang, S.-Y., Borca-Tasciuc, D. A., Worobo, R. W., & Moraru, C. I. (2015) · npj Biofilms and Microbiomes · doi:10.1038/npjbiofilms.2015.22 · Cited by 263
Metadata
- Authors
- Ran, C., Ding, G., Liu, W., Deng, Y., & Hou, W.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-08-15
- Volume
- 24
- Issue
- 18
- Pages
- 9952-9955
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2012404980
- Cited by
- 225
- References
- 2
- FWCI
- 5.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.