The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Mechanically Stable Antireflection and Antifogging Coatings Fabricated by the Layer-by-Layer Deposition Process and Postcalcination
Abstract
Complexes of poly(diallyldimethylammonium chloride) (PDDA) and sodium silicate (PDDA-silicate) are alternately deposited with poly(acrylic acid) (PAA) to fabricate PAA/PDDA-silicate multilayer films. The removal of the organic components in the PAA/PDDA-silicate mulilayer films through calcination produces highly porous silica coatings with excellent mechanical stability and good adhesion to substrates. Quartz substrates covered with such porous silica coatings exhibit both antireflection and antifogging properties because of the reduced refractive index and superhydrophilicity of the resultant films. A maximum transmittance of 99.86% in the visible spectral range is achieved for the calcinated PAA/PDDA-silicate films deposited on quartz substrates. The wavelengths of maximum transmittance could be well tailored by simply changing the deposition cycles of multilayer films. The usage of PDDA-silicate complexes allows for the introduction of high porosity to the resultant silica coatings, which favors the fabrication of antireflection and antifogging coatings with enhanced performance. Meanwhile, PDDA-silicate complexes enable rapid fabrication of thick porous silica coatings after calcination because of the large dimensions of the complexes in solution. The easy availability of the materials and simplicity of this method for film fabrication might make the mechanically stable multifunctional antireflection and antifogging coatings potentially useful in a variety of applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Cited by
Bioinspired Surfaces with Superwettability: New Insight on Theory, Design, and Applications
Wang, S., Liu, K., Yao, X., & Jiang, L. (2015) · Chemical Reviews · doi:10.1021/cr400083y · Cited by 1,646
Recent developments in bio-inspired special wettability
Liu, K., Yao, X., & Jiang, L. (2010) · Chemical Society Reviews · doi:10.1039/b917112f · Cited by 1,069
A review on ‘self-cleaning and multifunctional materials’
Ragesh, P., Anand Ganesh, V., Nair, S. V., & Nair, A. S. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02542c · Cited by 481
A Review on Superhydrophobic Polymer Nanocoatings: Recent Development and Applications
Das, S., Kumar, S., Samal, S. K., Mohanty, S., & Nayak, S. K. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04887 · Cited by 357
Special oleophobic and hydrophilic surfaces: approaches, mechanisms, and applications
Wang, Y., & Gong, X. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10474f · Cited by 267
Metadata
- Authors
- Zhang, L., Li, Y., Sun, J., & Shen, J.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-09-04
- Volume
- 24
- Issue
- 19
- Pages
- 10851-10857
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2012225994
- Cited by
- 184
- References
- 1
- FWCI
- 6.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanically Stable Antireflection and Antifogging Coatings Fabricated by the Layer-by-Layer Deposition Process and Postcalcination. https://app.cochat.ai/papers/10.1021/la801806r
- The paper
- Zhang, L., Li, Y., Sun, J., & Shen, J. (2008). Mechanically Stable Antireflection and Antifogging Coatings Fabricated by the Layer-by-Layer Deposition Process and Postcalcination. Langmuir. https://doi.org/10.1021/la801806r
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.