The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Superhydrophobic Composite Films Produced on Various Substrates
Abstract
Hydrophilic silica (SiO2) nanoparticles were dispersed in solutions of poly(methyl methacrylate) (PMMA) and in solutions of a commercial poly(alkyl siloxane) (Rhodorsil 224), and the suspensions were sprayed on glass surfaces. The effect of the particle concentration on the hydrophobic character of PMMA-SiO2 and Rhodorsil-SiO2 films was investigated and showed the following: (i) Static contact angles (theta s), measured on surfaces that were prepared from dilute dispersions (particle concentration <1% w/v), increase rapidly with particle concentration and reach maximum values (154 and 164 degrees for PMMA-SiO2 and siloxane-SiO2, respectively). Further increases in particle concentration do not have any effect on theta s. (ii) The effect of particle concentration on the contact angle hysteresis (thetaAlpha - thetaR) is more complicated: as the particle concentration increases, we first notice an increase in hysteresis, which then decreases and finally becomes constant at elevated particle concentrations. The lowest thetaAlpha - thetaR values were 5 degrees for PMMA-SiO2 and 3 degrees for siloxane-SiO2, respectively. (iii) SEM and AFM images show that a two-length-scale hierarchical structure is formed on the surface of the superhydrophobic films. It is demonstrated that superhydrophobicity can be achieved using various hydrophilic nanoparticles (alumina and tin oxide nanoparticles were successfully tested) and that the substrate has almost no effect on the hydrophobic character of the applied coatings, which were produced on silicon, concrete, aluminum, silk, wood, marble, and of course glass. The results are discussed in light of Wenzel and Cassie-Baxter models.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
Purity of the sacred lotus, or escape from contamination in biological surfaces
Barthlott, W., & Neinhuis, C. (1997) · Planta · doi:10.1007/s004250050096 · Cited by 6,860
Super‐Hydrophobic Surfaces: From Natural to Artificial
Feng, L., Li, S., Li, Y., Li, H., Zhang, L., Zhai, J., Song, Y., Liu, B., Jiang, L., & Zhu, D. (2002) · Advanced Materials · doi:10.1002/adma.200290020 · Cited by 4,404
Water-repellent legs of water striders
Gao, X., & Jiang, L. (2004) · Nature · doi:10.1038/432036a · Cited by 2,609
Bioinspired Surfaces with Special Wettability
Sun, T., Feng, L., Gao, X., & Jiang, L. (2005) · Accounts of Chemical Research · doi:10.1021/ar040224c · Cited by 2,044
Transformation of a Simple Plastic into a Superhydrophobic Surface
Erbil, H. Y., Demirel, A. L., Avcı, Y., & Mert, O. (2003) · Science · doi:10.1126/science.1078365 · Cited by 1,724
Quéré, D. (2005) · Reports on Progress in Physics · doi:10.1088/0034-4885/68/11/r01 · Cited by 1,249
Ultrahydrophobic and Ultralyophobic Surfaces: Some Comments and Examples
Chen, W., Fadeev, A. Y., Hsieh, M. C., Öner, D., Youngblood, J., & McCarthy, T. J. (1999) · Langmuir · doi:10.1021/la990074s · Cited by 1,190
Stable Superhydrophobic Coatings from Polyelectrolyte Multilayers
Zhai, L., Cebeci, F. Ç., Cohen, R. E., & Rubner, M. F. (2004) · Nano Letters · doi:10.1021/nl049463j · Cited by 916
Artificial Lotus Leaf by Nanocasting
Sun, M., Luo, C., Xu, L., Ji, H., Ouyang, Q., Yu, D., & Chen, Y. (2005) · Langmuir · doi:10.1021/la050316q · Cited by 687
The “Lotus Effect” Explained: Two Reasons Why Two Length Scales of Topography Are Important
Gao, L., & McCarthy, T. J. (2006) · Langmuir · doi:10.1021/la0532149 · Cited by 682
Transparent Superhydrophobic Films Based on Silica Nanoparticles
Bravo, J., Zhai, L., Wu, Z., Cohen, R. E., & Rubner, M. F. (2007) · Langmuir · doi:10.1021/la070159q · Cited by 597
Quéré, D. (2002) · Physica A: Statistical Mechanics and its Applications · doi:10.1016/s0378-4371(02)01033-6 · Cited by 533
Wettability and Contaminability of Insect Wings as a Function of Their Surface Sculptures
Wagner, T., Neinhuis, C., & Barthlott, W. (1996) · Acta Zoologica · doi:10.1111/j.1463-6395.1996.tb01265.x · Cited by 500
Ma, M., Hill, R. M., Lowery, J. L., Fridrikh, S. V., & Rutledge, G. C. (2005) · Langmuir · doi:10.1021/la047064y · Cited by 494
A Perfectly Hydrophobic Surface (θA/θR = 180°/180°)
Gao, L., & McCarthy, T. J. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062943n · Cited by 445
Intrinsically Superhydrophobic Organosilica Sol−Gel Foams
Shirtcliffe, N. J., McHale, G., Newton, M. I., & Perry, C. C. (2003) · Langmuir · doi:10.1021/la034204f · Cited by 442
Superhydrophobic and Lipophobic Properties of Self-Organized Honeycomb and Pincushion Structures
Yabu, H., Takebayashi, M., Tanaka, M., & Shimomura, M. (2005) · Langmuir · doi:10.1021/la050013w · Cited by 376
Wagner, P., Fürstner, R., Barthlott, W., & Neinhuis, C. (2003) · Journal of Experimental Botany · doi:10.1093/jxb/erg127 · Cited by 357
Hikita, M., Tanaka, K., Nakamura, T., Kajiyama, T., & Takahara, A. (2005) · Langmuir · doi:10.1021/la050901r · Cited by 324
Large Contact Angles of Plant and Animal Surfaces
CASSIE, A. B. D., & BAXTER, S. (1945) · Nature · doi:10.1038/155021a0 · Cited by 302
Contact angle hysteresis in oxygen plasma treated poly(tetrafluoroethylene)
Morra, M., Occhiello, E., & Garbassi, F. (1989) · Langmuir · doi:10.1021/la00087a050 · Cited by 279
Super-Repellent Composite Fluoropolymer Surfaces
Coulson, S. R., Woodward, I., Badyal, J. P. S., Brewer, S. A., & Willis, C. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp0000174 · Cited by 275
Influence of surface roughness on water- and oil-repellent surfaces coated with nanoparticles
Hsieh, C.-T., Chen, J.-M., Kuo, R.-R., Lin, T.-S., & Wu, C.-F. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2004.07.016 · Cited by 269
“Artificial Lotus Leaf” Prepared Using a 1945 Patent and a Commercial Textile
Gao, L., & McCarthy, T. J. (2006) · Langmuir · doi:10.1021/la061237x · Cited by 242
Superhydrophobic Behavior of a Perfluoropolyether Lotus-Leaf-like Topography
Zhang, L., Zhou, Z., Cheng, B., DeSimone, J. M., & Samulski, E. T. (2006) · Langmuir · doi:10.1021/la061400o · Cited by 225
Nanotexturing of poly(dimethylsiloxane) in plasmas for creating robust super-hydrophobic surfaces
Tserepi, A. D., Vlachopoulou, M.-E., & Gogolides, E. (2006) · Nanotechnology · doi:10.1088/0957-4484/17/15/062 · Cited by 202
Athanassiou, A., Lygeraki, M. I., Pisignano, D., Lakiotaki, K., Varda, M., Mele, E., Fotakis, C., Cingolani, R., & Anastasiadis, S. H. (2006) · Langmuir · doi:10.1021/la052122g · Cited by 106
Diurnal Fluctuation in a Physical Property of Leaf Cuticle
Fogg, G. E. (1944) · Nature · doi:10.1038/154515a0 · Cited by 76
Cited by
The Cassie equation: How it is meant to be used
Milne, A. J. B., & Amirfazli, A. (2012) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2011.12.001 · Cited by 338
Ishizaki, T., Saito, N., & Takai, O. (2010) · Langmuir · doi:10.1021/la904447c · Cited by 279
Metadata
- Authors
- Manoudis, P. N., Karapanagiotis, I., Tsakalof, A., Zuburtikudis, I., & Panayiotou, C.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-08-23
- Volume
- 24
- Issue
- 19
- Pages
- 11225-11232
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2066687040
- Cited by
- 269
- References
- 29
- FWCI
- 8.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
