The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
From Convective Assembly to Landau−Levich Deposition of Multilayered Phospholipid Films of Controlled Thickness
Abstract
In this letter, we describe a method to control the organization and thickness of multilayered phospholipid films. The meniscus of an organic solution of phospholipid molecules was dragged at a speed v on a solid substrate under controlled temperature and forced convection, leading to the deposition of a dried multilayered phospholipid film with a thickness h in the range of 20-200 nm. We found two distinct regimes dominating the film deposition. At low speeds, phospholipid molecules accumulate near the contact line and form a dry film behind the meniscus (evaporation regime). At high speed, viscous forces become predominant and pull out a liquid film that will dry afterward (Landau-Levich regime). Both regimes show robust scaling h infinity v(alpha) with alpha = -1.1 and 0.76, respectively. Although these regimes have been observed separately in the past, they have not been demonstrated in the same material system. Moreover, we present models whose scalings (alpha = -1 and 2/3) are in close agreement with the observed values. The microscale organization of the resulting film is independent of v for a given regime but differs from one regime to another. In the Landau-Levich regime, h is very homogeneous on the microscale with discrete variations of +/- 5 nm, that is, the thickness of one bilayer.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Capillary flow as the cause of ring stains from dried liquid drops
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (1997) · Nature · doi:10.1038/39827 · Cited by 6,435
Contact line deposits in an evaporating drop
Deegan, R. D., Bakajin, O., Dupont, T. F., Huber, G., Nagel, S. R., & Witten, T. A. (2000) · Physical Review E · doi:10.1103/physreve.62.756 · Cited by 2,300
Supported Membranes: Scientific and Practical Applications
Sackmann, E. (1996) · Science · doi:10.1126/science.271.5245.43 · Cited by 2,151
Evaporation-Induced Self-Assembly: Nanostructures Made Easy
Brinker, C. J., Lu, Y., Sellinger, A., & Fan, H. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199905)11:7<579::aid-adma579>3.0.co;2-r · Cited by 2,079
Fundamentals of Microfabrication
Madou, M. J. (2018) · CRC Press eBooks · doi:10.1201/9781482274004 · Cited by 2,020
Solid supported lipid bilayers: From biophysical studies to sensor design
Castellana, E. T., & Cremer, P. S. (2006) · Surface Science Reports · doi:10.1016/j.surfrep.2006.06.001 · Cited by 1,090
Nanoparticle printing with single-particle resolution
Kraus, T., Malaquin, L., Schmid, H., Riess, W., Spencer, N. D., & Wolf, H. (2007) · Nature Nanotechnology · doi:10.1038/nnano.2007.262 · Cited by 449
Self-Assembly of Gradient Concentric Rings via Solvent Evaporation from a Capillary Bridge
Xu, J., Xia, J., Hong, S. W., Lin, Z., Qiu, F., & Yang, Y. (2006) · Physical Review Letters · doi:10.1103/physrevlett.96.066104 · Cited by 283
Spreading and Instabilities Induced by a Solutal Marangoni Effect
Fanton, X., & Cazabat, A. M. (1998) · Langmuir · doi:10.1021/la971292t · Cited by 174
Electroformation of giant liposomes from spin-coated films of lipids
Estes, D. J., & Mayer, M. (2005) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2005.01.016 · Cited by 104
Cited by
Scalable fabrication and coating methods for perovskite solar cells and solar modules
Park, N.-G., & Zhu, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0176-2 · Cited by 908
Deng, Y., Zheng, X., Bai, Y., Wang, Q., Zhao, J., & Huang, J. (2018) · Nature Energy · doi:10.1038/s41560-018-0153-9 · Cited by 791
Morphology control strategies for solution-processed organic semiconductor thin films
Diao, Y., Shaw, L., Bao, Z., & Mannsfeld, S. C. B. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00688g · Cited by 670
The meniscus-guided deposition of semiconducting polymers
Gu, X., Shaw, L., Gu, K., Toney, M. F., & Bao, Z. (2018) · Nature Communications · doi:10.1038/s41467-018-02833-9 · Cited by 462
How to exploit the full potential of the dip-coating process to better control film formation
Grosso, D. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12837j · Cited by 400
Cho, S., Kang, S., Pandya, A., Shanker, R., Khan, Z., Lee, Y., Park, J., Craig, S. L., & Ko, H. (2017) · ACS Nano · doi:10.1021/acsnano.7b01714 · Cited by 365
Preparation of Sol−Gel Films by Dip-Coating in Extreme Conditions
Faustini, M., Louis, B., Albouy, P. A., Kuemmel, M., & Grosso, D. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp9114755 · Cited by 329
Ultrahigh electrical conductivity in solution-sheared polymeric transparent films
Worfolk, B. J., Andrews, S. C., Park, S., Reinspach, J., Liu, N., Toney, M. F., Mannsfeld, S. C. B., & Bao, Z. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509958112 · Cited by 319
A Review on Scaling Up Perovskite Solar Cells
Li, D., Zhang, D., Lim, K., Hu, Y., Rong, Y., Mei, A., Park, N., & Han, H. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202008621 · Cited by 284
Flow-enhanced solution printing of all-polymer solar cells
Diao, Y., Zhou, Y., Kurosawa, T., Shaw, L., Wang, C., Park, S., Guo, Y., Reinspach, J. A., Gu, K., Gu, X., et al. (2015) · Nature Communications · doi:10.1038/ncomms8955 · Cited by 254
Materials and Methods for High‐Efficiency Perovskite Solar Modules
Lee, D.-K., & Park, N.-G. (2022) · Solar RRL · doi:10.1002/solr.202100455 · Cited by 86
Metadata
- Authors
- Le Berre, M., Chen, Y., & Baigl, D.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-02-03
- Volume
- 25
- Issue
- 5
- Pages
- 2554-2557
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W2075469854
- Cited by
- 308
- References
- 11
- FWCI
- 7.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.