The DOI matches its Crossref record.
A Rheological Study on the Kinetics of Hybrid Formation in Polypropylene Nanocomposites
Abstract
We present an experimental investigation on the creep behavior of molten polypropylene organically modified clay nanocomposites. The nanocomposite hybrids were prepared by melt intercalation in an extruder in the presence or absence of a compatibilizer. They were subsequently annealed and simultaneously characterized using high-temperature wide-angle X-ray diffraction and controlled stress rheometry. The creep resistance of compatibilized hybrids was significantly higher than that of uncompatibilized hybrids and also increased with annealing time. The microstructure of the nanocomposites as investigated by TEM and high-temperature WAXD showed the presence of clay crystallites dispersed within the polymer matrix. The creep data together with the microstructural investigation are probably indicative of a small amount of exfoliation from the edges of the clay crystallites during extrusion and annealing. The zero shear viscosity of the compatibilized nanocomposites containing greater than 3 wt % clay was at least 3 orders of magnitude higher than that of matrix resin and the uncompatibilized hybrids. Importantly, the large increase in zero shear viscosity was not accompanied by any increase in the flow activation energy compared to the matrix polymer. The compatibilized hybrids also showed an apparent “yield” behavior. We conclude that the solidlike rheological response of the molten nanocomposite originates from large frictional interactions of the clay crystallites. Compatibilizer has a significant influence in modifying the rheological behavior.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
50th Anniversary Perspective: Are Polymer Nanocomposites Practical for Applications?
Kumar, S. K., Benicewicz, B. C., Vaia, R. A., & Winey, K. I. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02330 · Cited by 628
A hierarchical structure and properties of intercalated polypropylene/clay nanocomposites
Nam, P. H., Maiti, P., Okamoto, M., Kotaka, T., Hasegawa, N., & Usuki, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00512-2 · Cited by 502
Sinha Ray, S., Pouliot, S., Bousmina, M., & Utracki, L. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.009 · Cited by 436
Rheology of polymer layered silicate nanocomposites
Krishnamoorti, R., & Yurekli, K. (2001) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(01)00121-2 · Cited by 403
Gelfer, M. Y., Song, H. H., Liu, L., Hsiao, B. S., Chu, B., Rafailovich, M., Si, M., & Zaitsev, V. (2003) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10360 · Cited by 263
Rheological and thermal properties of poly(ethylene oxide)/multiwall carbon nanotube composites
Abraham, T. N., Ratna, D., Siengchin, S., & Karger‐Kocsis, J. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28773 · Cited by 41
Metadata
- Authors
- Galgali, G., Ramesh, C., & Lele, A.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-01-18
- Volume
- 34
- Issue
- 4
- Pages
- 852-858
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2053435051
- Cited by
- 596
- References
- 0
- FWCI
- 31.08
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.