The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Effects of organoclays on morphology and thermal and rheological properties of polystyrene and poly(methyl methacrylate) blends
Abstract
Morphology, thermal and rheological properties of polymer‐organoclay composites prepared by melt‐blending of polystyrene (PS), poly(methyl methacrylate) (PMMA), and PS/PMMA blends with Cloisite® organoclays were examined by transmission electron microscopy, small‐angle X‐ray scattering, secondary ion mass spectroscopy, differential scanning calorimetry, and rheological techniques. Organoclay particles were finely dispersed and predominantly delaminated in PMMA‐clay composites, whereas organoclays formed micrometer‐sized aggregates in PS‐clay composites. In PS/PMMA blends, the majority of clay particles was concentrated in the PMMA phase and in the interfacial region between PS and PMMA. Although incompatible PS/PMMA blends remained phase‐separated after being melt‐blended with organoclays, the addition of organoclays resulted in a drastic reduction in the average microdomain sizes (from 1–1.5 μm to ca. 300–500 nm), indicating that organoclays partially compatibilized the immiscible PS/PMMA blends. The effect of surfactant (di‐methyl di‐octadecyl‐ammonia chloride), used in the preparation of organoclays, on the PS/PMMA miscibility was also investigated. The free surfactant was more compatible with PMMA than with PS; the surfactant was concentrated in PMMA and in the interfacial region of the blends. The microdomain size reduction resulting from the addition of organoclays was definitely more significant than that caused by adding the same amount of free surfactant without clay. The effect of organoclays on the rheological properties was insignificant in all tested systems, suggesting weak interactions between the clay particles and the polymer matrix. In the PS system, PMMA, and organoclay the extent of clay exfoliation and the resultant properties are controlled by the compatibility between the polymer matrix and the surfactant rather than by interactions between the polymer and the clay surface. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 44–54, 2003
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alexandre, M., & Dubois, P. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00012-7 · Cited by 6,377
Polymer-layered silicate nanocomposites: an overview
LeBaron, P. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00017-4 · Cited by 2,504
Analysis of Linear Viscoelasticity of a Crosslinking Polymer at the Gel Point
Winter, H. H., & Chambon, F. (1986) · Journal of Rheology · doi:10.1122/1.549853 · Cited by 2,449
An assessment of high voltage electron microscopy (HVEM). An invited review
Loretto, M. H., & Smallman, R. E. (1977) · Materials Science and Engineering · doi:10.1016/0025-5416(77)90085-4 · Cited by 1,655
Vaia, R. A., Ishii, H., & Giannelis, E. P. (1993) · Chemistry of Materials · doi:10.1021/cm00036a004 · Cited by 1,145
Polymer-Silicate Nanocomposites: Model Systems for Confined Polymers and Polymer Brushes
Giannelis, E. P., Krishnamoorti, R., & Manias, E. (1999) · Advances in Polymer Science · doi:10.1007/3-540-69711-x_3 · Cited by 1,129
Structure and Dynamics of Polymer-Layered Silicate Nanocomposites
Krishnamoorti, R., Vaia, R. A., & Giannelis, E. P. (1996) · Chemistry of Materials · doi:10.1021/cm960127g · Cited by 901
Lattice Model of Polymer Melt Intercalation in Organically-Modified Layered Silicates
Vaia, R. A., & Giannelis, E. P. (1997) · Macromolecules · doi:10.1021/ma9514333 · Cited by 827
Rheology of End-Tethered Polymer Layered Silicate Nanocomposites
Krishnamoorti, R., & Giannelis, E. P. (1997) · Macromolecules · doi:10.1021/ma960550a · Cited by 779
Rheology of Polypropylene/Clay Hybrid Materials
Solomon, M. J., Almusallam, A. S., Seefeldt, K. F., Somwangthanaroj, A., & Varadan, P. (2001) · Macromolecules · doi:10.1021/ma001122e · Cited by 653
Cited by
Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends
Taguet, A., Cassagnau, P., & Lopez-Cuesta, J.-M. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.002 · Cited by 572
Sinha Ray, S., Pouliot, S., Bousmina, M., & Utracki, L. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.009 · Cited by 436
Compatibilizing Bulk Polymer Blends by Using Organoclays
Si, M., Araki, T., Ade, H., Kilcoyne, A. L. D., Fisher, R., Sokolov, J. C., & Rafailovich, M. H. (2006) · Macromolecules · doi:10.1021/ma060125+ · Cited by 332
Self-citationZhu, B., Wang, Y., Liu, H., Ying, J., Liu, C., & Shen, C. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108048 · Cited by 94
Macro, micro and nanostructured morphologies of multiphase polymer systems
Huang, H. (2011) · Handbook of Multiphase Polymer Systems · doi:10.1002/9781119972020.ch6 · Cited by 16
Metadata
- Authors
- Gelfer, M. Y., Song, H. H., Liu, L., Hsiao, B. S., Chu, B., Rafailovich, M., Si, M., & Zaitsev, V.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2002-11-21
- Volume
- 41
- Issue
- 1
- Pages
- 44-54
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2141538567
- Cited by
- 263
- References
- 16
- FWCI
- 9.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of organoclays on morphology and thermal and rheological properties of polystyrene and poly(methyl methacrylate) blends. https://app.cochat.ai/papers/10.1002/polb.10360
- The paper
- Gelfer, M. Y., Song, H. H., Liu, L., Hsiao, B. S., Chu, B., Rafailovich, M., Si, M., & Zaitsev, V. (2003). Effects of organoclays on morphology and thermal and rheological properties of polystyrene and poly(methyl methacrylate) blends. Journal of Polymer Science Part B: Polymer Physics. https://doi.org/10.1002/polb.10360
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.