Plasticized Starch/Tunicin Whiskers Nanocomposites. 1. Structural Analysis
Open accessThe DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
Nanocomposite materials were obtained using glycerol plasticized starch as the matrix and a colloidal suspension of cellulose whiskers as the reinforcing phase. The cellulose whiskers, prepared from tunicin, consisted of slender parallelepiped rods with a high aspect ratio. After mixing the raw materials and gelatinization of starch, the resulting suspension was cast and evaporated under vacuum. The composites were conditioned at various moisture contents in order to evaluate the effect of this parameter on the composite structure. The resulting films were characterized using scanning electron microscopy, differential scanning calorimetry, water absorption experiments, and wide-angle X-ray scattering. An accumulation of plasticizer in the cellulose/amylopectin interfacial zones was evidenced. The specific behavior of amylopectin chains located near the interface in the presence of cellulose probably led to a transcrystallization phenomenon of amylopectin on cellulose whiskers surface.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Estimation of the surface free energy of polymers
Owens, D. K., & Wendt, R. C. (1969) · Journal of Applied Polymer Science · doi:10.1002/app.1969.070130815 · Cited by 9,476
Polymer nanocomposites reinforced by cellulose whiskers
Favier, V., Chanzy, H., & Cavaille, J. Y. (1995) · Macromolecules · doi:10.1021/ma00122a053 · Cited by 1,149
GONTARD, N., GUILBERT, S., & CUQ, J. (1993) · Journal of Food Science · doi:10.1111/j.1365-2621.1993.tb03246.x · Cited by 890
Liquid Crystal Systems from Fibrillar Polysaccharides
MARCHESSAULT, R. H., MOREHEAD, F. F., & WALTER, N. M. (1959) · Nature · doi:10.1038/184632a0 · Cited by 683
Nanocomposite materials from latex and cellulose whiskers
Favier, V., Canova, G. R., Cavaillé, J. Y., Chanzy, H., Dufresne, A., & Gauthier, C. (1995) · Polymers for Advanced Technologies · doi:10.1002/pat.1995.220060514 · Cited by 561
Self-citationDufresne, A., Dupeyre, D., & Vignon, M. R. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000628)76:14<2080::aid-app12>3.0.co;2-u · Cited by 523
Self-citationHelbert, W., Cavaillé, J. Y., & Dufresne, A. (1996) · Polymer Composites · doi:10.1002/pc.10650 · Cited by 473
Self-citationCrystallinity in starch bioplastics
van Soest, J. J. G., Hulleman, S. H. D., de Wit, D., & Vliegenthart, J. F. G. (1996) · Industrial Crops and Products · doi:10.1016/0926-6690(95)00048-8 · Cited by 465
Lourdin, D., Coignard, L., Bizot, H., & Colonna, P. (1997) · Polymer · doi:10.1016/s0032-3861(97)00082-7 · Cited by 429
Improvement of starch film performances using cellulose microfibrils
Dufresne, A., & Vignon, M. R. (1998) · Macromolecules · doi:10.1021/ma971532b · Cited by 409
Self-citation
Research works printed but not linked: 18
- Griffin G. J. L., 1977, US Patent 4,016,177
- Griffin G. J. L., 1977, US Patent 4,021,388
- Griffin G. J. L., 1978, US Patent 4,125,495
- Westhoff R. P., 1974, Ind. Eng. Chem. Prod. Res. Dev., 13, 123
- Otey F. P., 1977, Ind. Eng. Chem. Prod. Res. Dev., 16, 305
- Otey F. P., 1979, US Patent 4,133,784
- Otey F. P., 1982, US Patent 4,337,181
- Stepto R. F., 1989, European Patent 0,326,517
- Davies H. A., 1953, US Patent 2,656,571
- Muetgeert J., 1958, US Patent 2,822,581
- Walton H. M., 1967, US Patent 3,312,560
- Protzman T. F., 1967, US Patent 3,344,216
- Svegmark K., 1993, Food Struct., 12, 181
- Pellegrini C., 1998, Macromol. Symp.
- Wise L. E., 1946, Pap. Trade J., 122, 35
- Vergnaud J., 1991, Liquid Transport Process in Polymeric Materials: Modeling and Industrial Applications
- Jallu J., 1995, TAGA Proc.
- Lanet V., 1995, TAGA Proc.
Cited by
Items 201–300 of 667
Lamanna, M. E., Morales, N. J., García, N. L., & Goyanes, S. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.04.081 · Cited by 119
Chiappone, A., Nair, J. R., Gerbaldi, C., Jabbour, L., Bongiovanni, R. M., Zeno, E., Beneventi, D., & Penazzi, N. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.07.015 · Cited by 129
Reinforcing potential of micro- and nano-sized fibers in the starch-based biocomposites
Soykeabkaew, N., Laosat, N., Ngaokla, A., Yodsuwan, N., & Tunkasiri, T. (2012) · Composites Science and Technology · doi:10.1016/j.compscitech.2012.02.015 · Cited by 119
Films from oat spelt arabinoxylan plasticized with glycerol and sorbitol
Mikkonen, K. S., Heikkinen, S. L., Soovre, A., Peura, M., Serimaa, R. E., Talja, R. A., Helén, H., Hyvönen, L. E. T., & Tenkanen, M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30513 · Cited by 119
Mechanical and Morphological Properties of Cellulose Fibril Reinforced Nanocomposites
Zimmermann, T., Pöhler, E., & Schwaller, P. (2005) · Advanced Engineering Materials · doi:10.1002/adem.200500157 · Cited by 124
Innovative plasticized starch films modified with waterborne polyurethane from renewable resources
Lu, Y., Tighzert, L., Berzin, F., & Rondot, S. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.04.013 · Cited by 115
Preparation of nano cellulose fibers and its application in kappa-carrageenan based film
Savadekar, N. R., Karande, V. S., Vigneshwaran, N., Bharimalla, A. K., & Mhaske, S. T. (2012) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2012.08.014 · Cited by 120
Ten, E., Bahr, D. F., Li, B., Jiang, L., & Wolcott, M. P. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2023367 · Cited by 122
Syafri, E., Jamaluddin, J., Sari, N. H., Mahardika, M., Amanda, P., & Ilyas, R. A. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.12.111 · Cited by 119
Viguié, J., Molina-Boisseau, S., & Dufresne, A. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700136 · Cited by 117
Self-citationMechanical properties of nanocomposites from sorbitol plasticized starch and tunicin whiskers
Mathew, A. P., Thielemans, W., & Dufresne, A. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28623 · Cited by 116
Self-citationCellulosic materials as natural fillers in starch-containing matrix-based films: a review
Gutiérrez, T. J., & Álvarez, V. A. (2016) · Polymer Bulletin · doi:10.1007/s00289-016-1814-0 · Cited by 114
Sabetzadeh, M., Bagheri, R., & Masoomi, M. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.11.038 · Cited by 108
“It has been suggested that starch plasticized by glycerol is a partially 209 miscible mixture of glycerol-rich and starch-rich phases (Anglès & Dufresne, 2000; Taguet et al, 210 2009; Wilhelm, Sierakowski, Souza & Wypych, 2003).”
BackgroundCellulose-Based Composites and Nanocomposites
Dufresne, A. (2012) · Elsevier eBooks · doi:10.1016/b978-1-4557-2834-3.00008-2 · Cited by 113
“Reproduced with permission from Reference [34] .”
BackgroundInfluentialSelf-citationChen, Q., Liu, Y., & Chen, G. (2019) · Cellulose · doi:10.1007/s10570-019-02254-x · Cited by 114
Oriented surfaces of adsorbed cellulose nanowhiskers promote skeletal muscle myogenesis
Dugan, J. M., Collins, R. F., Gough, J. E., & Eichhorn, S. J. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.08.050 · Cited by 115
Influence of fiber modifications on PLA/fiber composites. Behavior to accelerated weathering
Spiridon, I., Darie-Niță, R. N., & Kangas, H. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.02.032 · Cited by 113
Das, K., Ray, D., Bandyopadhyay, N. R., Ghosh, T., Mohanty, A. K., & Misra, M. (2009) · Cellulose · doi:10.1007/s10570-009-9280-6 · Cited by 105
Yoon, S., Park, M., & Byun, H. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.08.046 · Cited by 111
Lendvai, L., Apostolov, A. A., & Karger-Kocsis, J. (2017) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2017.05.100 · Cited by 103
“It was proposed (Anglès & Dufresne, 2000; Soykeabkaew, Laosat, Ngaokla, Yodsuwan, & Tunkasiri, 2012) that glycerol-plasticized TPS is a heterogeneous system that contains glycerol-rich domains dispersed in a continuous starch-rich phase and these two phases have different relaxation peaks.”
BackgroundIyer, K. A., Schueneman, G. T., & Torkelson, J. M. (2014) · Polymer · doi:10.1016/j.polymer.2014.11.017 · Cited by 108
Song, L. Y., Huang, J. T., Chang, P. R., Wei, S., Xu, Y., & Zhang, Q. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.023 · Cited by 106
Nanocomposites in Food Packaging – A Review
de Azeredo, H. M. C., Mattoso, L. H. C., & Habig, T. (2011) · InTech eBooks · doi:10.5772/14437 · Cited by 123
Abral, H., Dalimunthe, M. H., Hartono, J., Efendi, R. P., Asrofi, M., Sugiarti, E., Sapuan, S. M., Park, J., & Kim, H. (2018) · Starch - Stärke · doi:10.1002/star.201700287 · Cited by 115
Blanchard, R., Ogunsona, E. O., Hojabr, S., Berry, R., & Mekonnen, T. H. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b01117 · Cited by 105
Novel hydrophilic carboxymethyl starch/montmorillonite nanocomposite films
Wilpiszewska, K., Antosik, A. K., & Spychaj, T. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.04.023 · Cited by 98
Pereda, M., Kissi, N. E., & Dufresne, A. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501755p · Cited by 108
Self-citationOthman, S. H., MAJID, N. A., Tawakkal, I. S. M. A., Basha, R. K., Nordin, N., & Shapi’i, R. A. (2019) · Food Science and Technology · doi:10.1590/fst.36017 · Cited by 102
Nanocellulosen: eine neue Familie naturbasierter Materialien
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D. G., & Dorris, A. (2011) · Angewandte Chemie · doi:10.1002/ange.201001273 · Cited by 98
Influence of storage conditions on starch/PVA films containing cellulose nanofibers
Panaitescu, D. M., Frone, A. N., Ghiurea, M., & Chiulan, I. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.03.028 · Cited by 99
Preparation, reinforcement and properties of thermoplastic starch film by film blowing
Liu, W., Wang, Z., Liu, J., Dai, B., Shi-sheng, H., Hong, R., Xie, H., Li, Z., Chen, Y., & Zeng, G. (2020) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2020.106006 · Cited by 98
Production and Characterisation of Cellulose and Nano-Crystalline Cellulose from Kenaf Core Wood
Chan, C. H., Chia, C. H., Zakaria, S., Ahmad, I. B., & Dufresne, A. (2012) · BioResources · doi:10.15376/biores.8.1.785-794 · Cited by 111
“The absorption peak at 1593 cm 1 is attributed to the aromatic symmetric stretching, while the absorption peak at 1503 cm 1 is attributed to aromatic asymmetric stretching from lignin (Atalla and Agarwal 2010; Yan et al. 2009).”
BackgroundSelf-citationCelluloses and Polyoses/Hemicelluloses
Heinze, T. J., & Liebert, T. F. (2012) · Elsevier eBooks · doi:10.1016/b978-0-444-53349-4.00255-7 · Cited by 111
Lepidium perfoliatum seed gum: A new source of carbohydrate to make a biodegradable film
Seyedi, S., Koocheki, A., Mohebbi, M., & Zahedi, Y. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.09.072 · Cited by 93
Siqueira, G. D. F., Fraschini, C., Bras, J., Dufresne, A., Prud'homme, R. E., & Laborie, M. G. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.09.014 · Cited by 104
Self-citationWoehl, M. A., Canestraro, C. D., Mikowski, A., Sierakowski, M. R., Ramos, L. P., & Wypych, F. (2010) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.12.045 · Cited by 102
Qiu, W., Endo, T., & Hirotsu, T. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.21123 · Cited by 100
Das, K., Ray, D., Bandyopadhyay, N. R., Sahoo, S., Mohanty, A. K., & Misra, M. (2010) · Composites Part B Engineering · doi:10.1016/j.compositesb.2010.12.017 · Cited by 96
Processing and Mechanical Properties of Natural Fiber Reinforced Thermoplastic Starch Biocomposites
Torres, F. G., Arroyo-Fernàndez, O. H., & Gómez, C. M. (2007) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705707073945 · Cited by 105
Dogan, N., & McHugh, T. H. (2007) · Journal of Food Science · doi:10.1111/j.1750-3841.2006.00237.x · Cited by 91
Dong, J., Li, M., Zhou, L., Lee, S., Mei, C., Xu, X., & Wu, Q. (2017) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24333 · Cited by 92
Ebrahimi, S. E., Koocheki, A., Milani, E., & Mohebbi, M. (2015) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2015.10.020 · Cited by 89
Panthapulakkal, S., & Sain, M. M. (2012) · International Journal of Polymer Science · doi:10.1155/2012/381342 · Cited by 100
Nagarajan, K. J., Balaji, A. N., Rajan, S. T. K., & Ramanujam, N. R. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115997 · Cited by 88
Othman, S. H., Nordin, N., Azman, N. A. B., Tawakkal, I. S. M. A., & Basha, R. K. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.05.082 · Cited by 88
Isolation and Characterization of Cellulose Whiskers from Kenaf (Hibiscus cannabinus L.) Bast Fibers
Zaini, L. H., Jonoobi, M., Tahir, P. M., & Karimi, S. (2013) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2013.41006 · Cited by 88
“The advancement in nanotechnology has brought about a trend in isolating whiskers from various cellulose sources such as ramie [6], grass fiber [7], sisal [8], and Tunicin [9].”
BackgroundStructure and Properties of Soy Protein Plastics Plasticized with Acetamide
Liu, D., & Zhang, L. (2006) · Macromolecular Materials and Engineering · doi:10.1002/mame.200600098 · Cited by 87
A review of cellulose nanocrystals and nanocomposites
Ramires, E. C., & Dufresne, A. (2011) · TAPPI Journal · doi:10.32964/tj10.4.9 · Cited by 96
Self-citationTransmission Electron Microscopy for the Characterization of Cellulose Nanocrystals
Kaushik, M., Fraschini, C., Chauve, G., Putaux, J., & Moores, A. (2015) · InTech eBooks · doi:10.5772/60985 · Cited by 105
Wilpiszewska, K., Antosik, A. K., & Zdanowicz, M. (2019) · Journal of Polymers and the Environment · doi:10.1007/s10924-019-01436-9 · Cited by 86
Preparation and properties of plasticized starch/multiwalled carbon nanotubes composites
Cao, X., Chen, Y., Chang, P. R., & Huneault, M. A. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26799 · Cited by 86
Frone, A. N., Nicolae, C. A., Gabor, A. R., & Panaitescu, D. M. (2015) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2015.10.010 · Cited by 92
Heat resistance of new biobased polymeric materials, focusing on starch, cellulose, PLA , and PHA
Peelman, N., Ragaert, P., Ragaert, K., Meulenaer, B. D., Devlieghere, F., & Cardon, L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42305 · Cited by 94
Cellulose Nanocomposite Biopolymer Foam—Hierarchical Structure Effects on Energy Absorption
Svagan, A. J., Berglund, L. A., & Jensen, P. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200183u · Cited by 90
Long-Chain Anhydride Modification: A New Strategy for Preparing Xylan Films
Zhong, L., Peng, X., Yang, D., Cao, X., & Sun, R. (2012) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf304818f · Cited by 85
Preparation and characterisation of composites from starch and sugar cane fibre
Gilfillan, W. N., Nguyen, D. M. T., Sopade, P. A., & Doherty, W. O. S. (2012) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.02.036 · Cited by 86
“The results of the diffusivity analysis are shown in Table 4 and are similar to results reported by Angles and Dufresne (2000) as there is a slight reduction in D with lower dosages of fibre.”
BackgroundMethodResultInfluentialReinforcing Poly(ethylene) with Cellulose Nanocrystals
Sapkota, J., Jorfi, M., Weder, C., & Foster, E. J. (2014) · Macromolecular Rapid Communications · doi:10.1002/marc.201400382 · Cited by 92
Li, J., Zhou, M., Cheng, G., Cheng, F., Lin, Y. H., & Zhu, P.-X. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.01.051 · Cited by 89
Stepanova, M., & Korzhikova‐Vlakh, E. (2022) · Polymers · doi:10.3390/polym14071477 · Cited by 91
Investigation of polymer electrolyte based on agar and ionic liquids
Leones, R., Sentanin, F., Rodrigues, L. C., Marrucho, I. M., Esperança, J. M. S. S., Pawlicka, A., & Silva, M. M. P. (2012) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2012.106 · Cited by 82
A Preliminary Study for the Use of Natural Fibers as Reinforcement in Starch‐Gluten‐Glycerol Matrix
Corradini, E., de Morais, L. C., Rosa, M. D. F., Mazzetto, S. E., Mattoso, L. H. C., & Agnelli, J. A. M. (2006) · Macromolecular Symposia · doi:10.1002/masy.200651380 · Cited by 81
Preparation and characterization of starch nanoparticles via self-assembly at moderate temperature
Liu, C., Qin, Y., Li, X., Sun, Q., Xiong, L., & Liu, Z. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.12.040 · Cited by 81
Dong, J., Mei, C., Han, J., Lee, S., & Wu, Q. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.06.004 · Cited by 80
Structure and properties of thermoplastic corn starch/montmorillonite biodegradable composites
Huang, M., & Yu, J. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22046 · Cited by 81
Chauve, G., Heux, L., Arouini, R., & Mazeau, K. (2005) · Biomacromolecules · doi:10.1021/bm0501205 · Cited by 81
Cellulose-Based Composites and Nanocomposites
Dufresne, A. (2008) · Elsevier eBooks · doi:10.1016/b978-0-08-045316-3.00019-3 · Cited by 119
Self-citationInvestigation into nanocellulosics versus acacia reinforced acrylic films
Pu, Y., Zhang, J., Elder, T., Deng, Y., Gatenholm, P., & Ragauskas, A. J. (2006) · Composites Part B Engineering · doi:10.1016/j.compositesb.2006.07.008 · Cited by 92
Physical and thermal mechanical properties of corn starch/LDPE composites
Oromiehie, A., lari, T. T., & Rabiee, A. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.37877 · Cited by 84
Singh, T., Gangil, B., Patnaik, A., Biswas, D., & Fekete, G. (2019) · Materials Research Express · doi:10.1088/2053-1591/aafe45 · Cited by 81
Amylopectin-rich starch plasticized with glycerol for polymer electrolyte application
Marcondes, R. F. M. S., D'Agostini, P. S., Ferreira, J. C. L., Girotto, E. M., Pawlicka, A., & Dragunski, D. C. (2010) · Solid State Ionics · doi:10.1016/j.ssi.2010.03.016 · Cited by 79
Alloin, F., d'Aprea, A., Dufresne, A., Kissi, N. E., & Bossard, F. (2011) · Cellulose · doi:10.1007/s10570-011-9543-x · Cited by 93
Self-citationdos Santos, F. A., Iulianelli, G. C. V., & Tavares, M. I. B. (2016) · Materials Sciences and Applications · doi:10.4236/msa.2016.75026 · Cited by 113
Feather Fiber‐Based Thermoplastics: Effects of Different Plasticizers on Material Properties
Ullah, A., & Wu, J. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200010 · Cited by 76
Ren, J., Dang, K., Pollet, É., & Avérous, L. (2018) · Polymers · doi:10.3390/polym10080808 · Cited by 80
Nanocellulose-Based Composites
Spence, K. L., Habibi, Y., & Dufresne, A. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_7 · Cited by 86
Self-citationFourati, Y., Magnin, A., Putaux, J., & Boufi, S. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.115554 · Cited by 75
“Two phenomenon are likely to account for this lower reinforcing effect in TPS matrix, as put forward by Anglès and Dufresne (2000), to explain the unexpected low reinforcing effect observed for tunicate/plasticized starch nanocomposites: (i) the plasticizing agents (glycerol and water) likely…”
BackgroundHybrid Rigid/Soft and Biologic/Synthetic Materials: Polymers Grafted onto Cellulose Microcrystals
Harrisson, S., Drisko, G. L., Malmström, E., Hult, A., & Wooley, K. L. (2011) · Biomacromolecules · doi:10.1021/bm101506j · Cited by 85
Martínez‐Sanz, M., Olsson, R. T., López‐Rubio, A., & Lagaron, J. M. (2010) · Cellulose · doi:10.1007/s10570-010-9471-1 · Cited by 77
Effects of Moisture on Glass Transition and Microstructure of Glycerol‐Plasticized Soy Protein
Chen, P., Zhang, L., & Cao, F. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500072 · Cited by 73
Nanocomposite polymer electrolyte based on whisker or microfibrils polyoxyethylene nanocomposites
Alloin, F., d'Aprea, A., Kissi, N. E., Dufresne, A., & Bossard, F. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.04.034 · Cited by 78
Self-citationProduction and Characteristics of Cellulose from Different Sources
Heinze, T. J., Seoud, O. A. E., & Koschella, A. (2018) · Springer series on polymer and composite materials · doi:10.1007/978-3-319-73168-1_1 · Cited by 96
Younas, M., Noreen, A., Sharif, A., Majeed, A., Hassan, A., Tabasum, S., Mohammadi, A., & Zia, K. M. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.11.064 · Cited by 74
Li, Z., Renneckar, S. H., & Barone, J. R. (2009) · Cellulose · doi:10.1007/s10570-009-9363-4 · Cited by 76
“Angles and Dufresne showed that plasticizer accumulation at the nanocellulose/polymer interface allowed amylopectin transcrystallinity and theorized that the increased crystallinity was responsible for the lower hydrophilicity (Angles and Dufresne 2000).”
BackgroundThermoplastic corn starch reinforced with cotton cellulose nanofibers
Teixeira, E. D. M., Lotti, C., Corrêa, A. C., Teodoro, K. B. R., Marconcini, J. M., & Mattoso, L. H. C. (2010) · Journal of Applied Polymer Science · doi:10.1002/app.33447 · Cited by 75
Physical properties of carboxymethyl cellulose based nano-biocomposites with Graphene nano-platelets
Ebrahimzadeh, S., Ghanbarzadeh, B., & Hamishehkar, H. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.11.074 · Cited by 71
Valdés, A., Ramos, M., Sanahuja, A. B., & Garrigós, M. C. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.03.011 · Cited by 72
Nasseri, R., & Mohammadi, N. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.01.029 · Cited by 72
“W surfaces than nanocomposite matrix (Angles & Dufresne, 2000; eixeira et al., 2009), so they migrate, accumulate and facilitate he chain movements in the interface regions.”
BackgroundInfluentialCreep behavior of starch-based nanocomposite films with cellulose nanofibrils
Li, M., Li, D., Wang, L.-J., & Adhikari, B. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.10.023 · Cited by 69
Clarkson, C. M., Azrak, S. M. E. A., Schueneman, G. T., Snyder, J. F., & Youngblood, J. P. (2019) · Polymer · doi:10.1016/j.polymer.2019.122101 · Cited by 76
Braun, B., Dorgan, J. R., & Chandler, J. P. (2008) · Biomacromolecules · doi:10.1021/bm7013137 · Cited by 83
Novel anisotropic materials from functionalised colloidal cellulose and cellulose derivatives
Holt, B. L., Stoyanov, S. D., Pelan, E. G., & Paunov, V. N. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01022g · Cited by 76
Martucci, J. F., & Ruseckaite, R. A. (2010) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602551003652730 · Cited by 67
“To determine the water absorption rate, the apparent diffusion coefficient (D app m 2 /seg) was calculated from the following relationship [ 25 , 26 ] .”
Lee, J., & Deng, Y. (2011) · Macromolecular Research · doi:10.1007/s13233-012-0008-3 · Cited by 74
Rzayev, Z. M. O. (2011) · arXiv (Cornell University) · doi:10.48550/arxiv.1105.1260 · Cited by 95
Lendvai, L., Karger-Kocsis, J., Kmetty, Á., & Drakopoulos, S. X. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42397 · Cited by 66
Junkasem, J., Rujiravanit, R., Grady, B. P., & Supaphol, P. (2009) · Polymer International · doi:10.1002/pi.2693 · Cited by 66
Holocellulose Nanocrystals: Amphiphilicity, Oil/Water Emulsion, and Self-Assembly
Jiang, F., & Hsieh, Y. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00240 · Cited by 66
Mabrouk, A. B., Kaddami, H., Magnin, A., Belgacem, M. N., Dufresne, A., & Boufi, S. (2010) · Polymer Engineering and Science · doi:10.1002/pen.21778 · Cited by 68
Self-citationZhao, Q. C., Wei, Y., Ni, C., Wang, L., Liu, B., Liu, J., Zhang, M., Men, Y., Sun, Z., Xie, H., et al. (2018) · Applied Surface Science · doi:10.1016/j.apsusc.2018.10.063 · Cited by 67
Interfacial phenomena in nanocomposites based on polysaccharide nanocrystals
Dufresne, A. (2003) · Composite Interfaces · doi:10.1163/156855403771953641 · Cited by 65
Self-citation
Metadata
- Authors
- Anglès, M. N., & Dufresne, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Dufresne, Alain
- ORCID
- Dufresne, Alain
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-10-01
- Volume
- 33
- Issue
- 22
- Pages
- 8344-8353
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2090182858
- Cited by
- 667
- References
- 38
- Citations by year
- 2026: 6 · 2025: 4 · 2024: 17 · 2023: 12 · 2022: 11 · 2021: 29 · 2020: 21 · 2019: 35 · 2018: 27 · 2017: 39 · 2016: 39 · 2015: 54 · 2014: 54 · 2013: 38 · 2012: 56
- FWCI
- 2.65
- Type
- journal article
- Language
- en
- Open access
- green
- hal.science
- Licence
- other-oa
- Locations
- Macromolecules (publishedVersion)
- HAL (submittedVersion)
- HAL (submittedVersion, other-oa)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › Nanocomposite Films for Food Packaging
- Health Sciences › Nursing › Nutrition and Dietetics › Food composition and properties
- Keywords
- cellulose whiskers, amylopectin, transcrystallization, moisture content, composite films, starch gelatinization, interfacial region, water absorption
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.