Crystallization and Solid-State Structure of Random Polylactide Copolymers: Poly(l-lactide-co-d-lactide)s
The DOI matches its Crossref record; 36 of the 37 references it cites were found in a registry or an index.
Abstract
This paper presents a continuation of our earlier research on the crystallization and solid-state structure of polylactide copolymers. The focus here is on random copolymers containing predominately l -lactide and small amounts (1.5, 3, and 6%) of d -lactide. As expected, degrees of crystallinity and spherulite growth rates decrease substantially with increasing d -lactide content in the copolymers. The importance of defect arrangement (isolated vs paired stereochemical defects) was demonstrated by comparison to our earlier research on l -lactide/ meso -lactide copolymers. At a given degree of supercooling, measured lamellar thicknesses decrease significantly with increasing R stereoisomer concentration: e.g., by more than a factor of 2 (compared to poly( l -lactide)) for the 6% d -lactide copolymer. The results of small-angle X-ray scattering experiments indicate that a significant amount of noncrystalline material resides between lamellar stacks. Equilibrium melting points were estimated for the copolymers using the Gibbs−Thomson approach, and the values conform with predictions of the model of Wendling and Suter in the exclusion limit. Taken together with the significant reduction in lamellar thickness and crystallinity, these results point to substantial rejection of d -lactide (and meso -lactide) defects from S stereoisomer crystals. However, experiments by others on similar copolymers suggest that a significant amount of R (or R − R ) isomers can be included in S crystals under certain crystallization conditions. Some speculation about the origin of these differences is presented.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Treatise on Solid State Chemistry: Volume 6B Surfaces II
(1976) · Springer eBooks · doi:10.1007/978-1-4613-4316-5 · Cited by 1,408
Hoffman, J. D., & Miller, R. L. (1997) · Polymer · doi:10.1016/s0032-3861(97)00071-2 · Cited by 1,065
Theory of crystallization in copolymers
Flory, P. J. (1955) · Transactions of the Faraday Society · doi:10.1039/tf9555100848 · Cited by 889
(1980) · Elsevier eBooks · doi:10.1016/c2009-0-22032-0 · Cited by 864
Direct evaluation of the electron density correlation function of partially crystalline polymers
Strobl, G. R., & Schneider, M. (1980) · Journal of Polymer Science: Polymer Physics Edition · doi:10.1002/pol.1980.180180614 · Cited by 816
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Crystallization kinetics of poly(l-lactic acid)
Vasanthakumari, R., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90129-5 · Cited by 406
Present and Future of PLA Polymers
Vert, M., Schwarch, G., & Coudane, J. (1995) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329508010289 · Cited by 365
Research works printed but not linked: 4
- Runt J., 2000, Polymers from Renewable Materials, Biopolyesters and Biocatalysis
- Hoffman J. D., 1976, Treatise on Solid State Chemistry, 3
- Wendling J., 1998, Macromolecules, 31, 251
- Zell M. T., 1998, J. Am. Chem. Soc., 120, 12072
Cited by
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives
Luckachan, G. E., & Pillai, C. K. S. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0317-1 · Cited by 767
Melt–solid polycondensation of lactic acid and its biodegradability
Maharana, T., Mohanty, B., & Negi, Y. S. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.001 · Cited by 368
Tsuji, H., Takai, H., & Saha, S. K. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.074 · Cited by 353
Towards Controlled Degradation of Poly(lactic) Acid in Technical Applications
Teixeira, S., Eblagon, K. M., Miranda, F., R. Pereira, M. F., & Figueiredo, J. L. (2021) · C · doi:10.3390/c7020042 · Cited by 237
Henton, D., Gruber, P., Lunt, J., & Randall, J. (2005) · Natural Fibers, Biopolymers, and Biocomposites · doi:10.1201/9780203508206.ch16 · Cited by 253
Nonisothermal cold crystallization behavior and kinetics of polylactide/clay nanocomposites
Wu, D., Wu, L., Wu, L., Xu, B., Zhang, Y., & Zhang, M. (2007) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21154 · Cited by 202
Isothermal cold crystallization kinetics of polylactide/nucleating agents
Liao, R., Yang, B., Yu, W., & Zhou, C. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25733 · Cited by 199
Oxidative degradation of polylactide (PLA) and its effects on physical and mechanical properties
Rasselet, D., Ruellan, A., Guinault, A., Miquelard-Garnier, G., Sollogoub, C., & Fayolle, B. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.10.011 · Cited by 196
Tsuji, H., & Tezuka, Y. (2004) · Biomacromolecules · doi:10.1021/bm049835i · Cited by 194
Urayama, H., Kanamori, T., Fukushima, K., & Kimura, Y. (2003) · Polymer · doi:10.1016/s0032-3861(03)00583-4 · Cited by 187
Temperature dependent variations in the lamellar structure of poly(l-lactide)
Cho, T.-Y., & Strobl, G. (2006) · Polymer · doi:10.1016/j.polymer.2005.12.027 · Cited by 171
John, G., Nagarajan, S., Vemula, P. K., Silverman, J. R., & Pillai, C. K. S. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.02.008 · Cited by 162
Melt strengthening of poly (lactic acid) through reactive extrusion with epoxy-functionalized chains
Corre, Y., Duchet‐Rumeau, J., Reignier, J., & Maazouz, A. (2011) · Rheologica Acta · doi:10.1007/s00397-011-0538-1 · Cited by 167
“The main properties of this PLA are summarized in Table 1. The PLA’s crystalline properties are governed by its enantiomeric composition (L/D ratio), and it has been reported by Baratian et al. (2001) that increasing the content of D eniantiomer reduces the crystallization Table 1 Main properties of PLA 3051D 1 PLA 30…”
BackgroundCrystallization Behavior of Polylactide/Graphene Composites
Wu, D., Cheng, Y., Feng, S., Yao, Z., & Zhang, M. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4004199 · Cited by 160
Blending Effects on Polymorphic Crystallization of Poly( l -lactide)
Pan, P., Liang, Z., Zhu, B., Dong, T., & Inoue, Y. (2009) · Macromolecules · doi:10.1021/ma8024943 · Cited by 163
Influence of α′‐/α‐crystal polymorphism on properties of poly( l ‐lactic acid)
Lorenzo, M. L. D., & Androsch, R. (2018) · Polymer International · doi:10.1002/pi.5707 · Cited by 157
Physical Properties, Crystallization, and Spherulite Growth of Linear and 3-Arm Poly(l-lactide)s
Tsuji, H., Miyase, T., Tezuka, Y., & Saha, S. K. (2005) · Biomacromolecules · doi:10.1021/bm049552q · Cited by 148
Spherulite growth of l-lactide copolymers: Effects of tacticity and comonomers
Tsuji, H., Tezuka, Y., Saha, S. K., Suzuki, M., & Itsuno, S. (2005) · Polymer · doi:10.1016/j.polymer.2005.03.069 · Cited by 146
Bouapao, L., Tsuji, H., Tashiro, K., Zhang, J., & Hanesaka, M. (2009) · Polymer · doi:10.1016/j.polymer.2009.06.040 · Cited by 131
Transcrystallization behavior at the poly(lactic acid)/sisal fibre biocomposite interface
Wang, Y., Tong, B., Hou, S., Li, M., & Shen, C. (2010) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.10.006 · Cited by 134
Magoń, A., & Pyda, M. (2009) · Polymer · doi:10.1016/j.polymer.2009.06.052 · Cited by 121
Control of Crystallization and Melting Behavior in Sequence Specific Polypeptoids
Rosales, A. M., Murnen, H. K., Zuckermann, R. N., & Segalman, R. A. (2010) · Macromolecules · doi:10.1021/ma1002563 · Cited by 114
Tsuji, H., Ikarashi, K., & Fukuda, N. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.01.010 · Cited by 110
Influence of Semicrystalline Morphology on the Glass Transition of Poly(L‐lactic acid)
Wang, Y., Funari, S. S., & Mano, J. F. (2006) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200600114 · Cited by 104
Pyda, M., & Wunderlich, B. (2005) · Macromolecules · doi:10.1021/ma051611k · Cited by 104
Zhao, Y., Zhu, B., Wang, Y., Liu, C., & Shen, C. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110041 · Cited by 104
Crystallization and biodegradation of polylactide/carbon nanotube composites
Wu, D., Wu, L., Zhou, W., Zhang, M., & Yang, T. (2010) · Polymer Engineering & Science · doi:10.1002/pen.21695 · Cited by 97
Vasanthan, N., & Ly, O. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.05.015 · Cited by 96
Marec, P. E. L., Ferry, L., Quantin, J.-C., Bénézet, J., Bonfils, F., Guilbert, S., & Bergeret, A. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.10.003 · Cited by 93
Heat resistance of new biobased polymeric materials, focusing on starch, cellulose, PLA , and PHA
Peelman, N., Ragaert, P., Ragaert, K., Meulenaer, B. D., Devlieghere, F., & Cardon, L. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42305 · Cited by 94
Lorenzo, M. L. D., Rubino, P., Luijkx, R., & Hélou, M. (2013) · Colloid & Polymer Science · doi:10.1007/s00396-013-3081-z · Cited by 92
“At parity of molecular mass, the PLA grades containing only L-lactide units in the chain have a faster crystal growth than the samples containing even small amounts of D-lactic acid units [24].”
BackgroundYou, J., Lou, L., Yu, W., & Zhou, C. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.38912 · Cited by 87
Thermal properties and miscibility of semi‐crystalline and amorphous PLA blends
Gao, C., Bao, X., Yu, L. F., Liu, H., Simon, G. P., Chen, L., & Liu, X. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41205 · Cited by 85
Stereocomplexation in Cyclic and Linear Polylactide Blends
Shin, E. J., Jones, A. E., & Waymouth, R. M. (2012) · Macromolecules · doi:10.1021/ma202184j · Cited by 83
Cho, J., Baratian, S., Kim, J., Yeh, F., Hsiao, B. S., & Runt, J. P. (2002) · Polymer · doi:10.1016/s0032-3861(02)00823-6 · Cited by 83
Self-citationCrystal nucleation in random l/d-lactide copolymers
Androsch, R., Lorenzo, M. L. D., & Schick, C. H. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.01.020 · Cited by 82
Mahendrasingam, A., Blundell, D. J., Parton, M., Wright, A. K., Rasburn, J., Narayanan, T., & Fuller, W. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.081 · Cited by 78
Kinetics of Nucleation and Growth of Crystals of Poly(l-lactic acid)
Androsch, R., Schick, C. H., & Lorenzo, M. L. D. (2017) · Advances in polymer science · doi:10.1007/12_2016_13 · Cited by 85
New approach to the double melting peak of poly( l -lactic acid) observed by DSC
Gracia‐Fernández, C., Gómez-Barreiro, S., López‐Beceiro, J., Naya, S., & Artiaga, R. (2012) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2012.57 · Cited by 75
Crystal Structure and Morphology of Poly( l -lactide-b- d -lactide) Diblock Copolymers
Li, L., Zhong, Z., de Jeu, W. H., Dijkstra, P. J., & Feijén, J. (2004) · Macromolecules · doi:10.1021/ma049077o · Cited by 76
Santonja‐Blasco, L., Ribes-Greus, A., & Alamo, R. G. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.12.012 · Cited by 73
Experimentally Determined Hansen Solubility Parameters of Biobased and Biodegradable Polyesters
Patel, K. G., Maynard, R. K., Ferguson, L. S., Broich, M. L., Bledsoe, J. C., Wood, C. C., Crane, G. H., Bramhall, J. A., Rust, J. M., Williams-Rhaesa, A. M., et al. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c07284 · Cited by 72
Aou, K., & Hsu, S. L. (2006) · Macromolecules · doi:10.1021/ma052058+ · Cited by 65
Multiple melting behavior of poly(lactic acid) filled with modified carbon black
Su, Z., Li, Q., Liu, Y., Hu, G., & Wu, C. (2009) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21790 · Cited by 62
Rangari, D., & Vasanthan, N. (2012) · Macromolecules · doi:10.1021/ma301482j · Cited by 60
As’habi, L., Jafari, S. H., Khonakdar, H. A., Häußler, L., Wagenknecht, U., & Heinrich, G. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.04.016 · Cited by 62
Stoclet, G., Séguéla, R., Lefebvre, J., Li, S., & Vert, M. (2011) · Macromolecules · doi:10.1021/ma200469t · Cited by 66
Yuryev, Y., Wood‐Adams, P. M., Heuzey, M., Dubois, C., & Brisson, J. (2008) · Polymer · doi:10.1016/j.polymer.2008.02.023 · Cited by 64
Liu, Y., Sun, J., Bian, X., Feng, L., Xiang, S., Sun, B., Chen, Z., Li, G., & Chen, X. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.12.024 · Cited by 60
Canetti, M., Cacciamani, A., & Bertini, F. (2014) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.23544 · Cited by 60
Androsch, R., & Schick, C. H. (2016) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.6b03022 · Cited by 63
Crystallization behavior of linear 1-arm and 2-arm poly(l-lactide)s: Effects of coinitiators
Tsuji, H., Sugiura, Y., Sakamoto, Y., Bouapao, L., & Itsuno, S. (2008) · Polymer · doi:10.1016/j.polymer.2008.01.029 · Cited by 57
Relaxation and crystal nucleation in polymer glasses
Androsch, R., Zhuravlev, E., Schmelzer, J. W. P., & Schick, C. H. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.03.026 · Cited by 57
Crystal Growth and Solid-State Structure of Poly(lactide) Stereocopolymers
Abe, H., Harigaya, M., Kikkawa, Y., Tsuge, T., & Doi, Y. (2005) · Biomacromolecules · doi:10.1021/bm049497l · Cited by 53
Kanchanasopa, M., & Runt, J. P. (2004) · Macromolecules · doi:10.1021/ma035597s · Cited by 47
Self-citationEffect of molar mass on enthalpy relaxation and crystal nucleation of poly (l-lactic acid)
Androsch, R., Lorenzo, M. L. D., & Schick, C. H. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.08.058 · Cited by 46
Lan, Q., & Li, Y. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b01442 · Cited by 43
Li, J., Li, Y., Zhou, J., Yang, J. H., Jiang, Z., Chen, P., Wang, Y., Gu, Q., & Wang, Z. (2011) · Macromolecules · doi:10.1021/ma1025434 · Cited by 42
Liao, X., & Nawaby, A. V. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3000997 · Cited by 41
Role of stereocomplex in advancing mass transport and thermomechanical properties of polylactide
Chen, Q., Auras, R. A., & Uysal‐Unalan, I. (2022) · Green Chemistry · doi:10.1039/d1gc04520b · Cited by 42
Mina, M. F., Beg, M. D. H., Islam, M. R., Nizam, A., Alam, A. K. M. M., & Yunus, R. M. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23564 · Cited by 41
Stability and Reorganization of α′‐Crystals in Random l / d ‐Lactide Copolymers
Lorenzo, M. L. D., & Androsch, R. (2016) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201600073 · Cited by 42
Song, P., Chen, G., Wei, Z., Zhang, W., & Liang, J. (2012) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-012-2502-4 · Cited by 39
“In the case of poly(L-lactide-co-D-lactide) or poly(L-lactide-co-meso-lactide), the value of p increases with decreasing OP because the D-isomer units are excluded from PLLA crystalline lamellae as defects [58, 59].”
BackgroundSarikhani, K., Nasseri, R., Lotocki, V., Thompson, R. B., Park, C. B., & Chen, P. (2016) · Polymer · doi:10.1016/j.polymer.2016.06.019 · Cited by 40
“This problem also arises when there is a large amount of co-monomers that possess different stereochemistry [44].”
BackgroundCrystal modifications and multiple melting behavior of poly( L ‐lactic acid‐co‐ D ‐lactic acid)
Shen, C., Wang, Y., Li, M., & Hu, D. (2010) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.22175 · Cited by 42
Kanchanasopa, M., Manias, E., & Runt, J. (2003) · Biomacromolecules · doi:10.1021/bm034063w · Cited by 37
Self-citationThermal Properties of Polylactides with Different Stereoisomers of Lactides Used as Comonomers
Feng, L., Zhang, B., Bian, X., Li, G., Chen, Z., & Chen, X. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b00818 · Cited by 38
Lan, Q., Yu, J., He, J., Maurer, F. H. J., & Zhang, J. P. (2010) · Macromolecules · doi:10.1021/ma101473r · Cited by 35
Alam, A. K. M. M., Mina, M. F., Beg, M. D. H., Mamun, A. A., Bledzki, A. K., & Shubhra, Q. T. H. (2014) · Fibers and Polymers · doi:10.1007/s12221-014-1303-8 · Cited by 36
Chen, Y., Zhao, L., Pan, H., Jia, S., Han, L., & Dong, L. (2019) · Polymer · doi:10.1016/j.polymer.2019.122022 · Cited by 32
Quiescent and shear-induced crystallization of linear and branched polylactides
Najafi, N., Heuzey, M. C., Carreau, P. J., & Therriault, D. (2015) · Rheologica Acta · doi:10.1007/s00397-015-0874-7 · Cited by 34
“The optically impure D-lactide units are found to incorporate defects into the crystal structure, leading to a delayed crystal nucleation and decelerated growth rate (Tsuji and Ikada 1996; Baratian et al. 2001).”
BackgroundIsothermal Crystallization Kinetics of Fiber/Polylactic Acid Composites and Morphology
Liu, T., Yu, X., Yu, F., Zhao, X., Lu, A., Wang, J., Wang, X., & Liu, T. (2012) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2012.659309 · Cited by 32
“Baratian et al.[14] found that these poly(L-lactide-coD-lactide)s copolymers exhibit a significant decrease in bulk crystallinity with modest D-lactide incorporation.”
BackgroundStereocomplexation and morphology of enantiomeric poly(lactic acid)s with moderate‐molecular‐weight
Wang, Y., & Mano, J. F. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27260 · Cited by 32
Song, P., Sang, L., Jin, C., & Wei, Z. (2017) · Polymer · doi:10.1016/j.polymer.2017.11.069 · Cited by 32
Jariyavidyanont, K., Du, M., Yu, Q., Thurn‐Albrecht, T., Schick, C. H., & Androsch, R. (2022) · Macromolecular Rapid Communications · doi:10.1002/marc.202200148 · Cited by 34
Crystallization of Cyclic Polymers
Pérez‐Camargo, R. A., Múgica, A., Zubitur, M., & Müller, A. J. (2015) · Advances in polymer science · doi:10.1007/12_2015_326 · Cited by 35
“The authors concluded that their results implied a lack of multiple chain folding in the cyclic PLLA chains, as a consequence of a topological constraint on lamellar folding [37, 67, 68].”
Marubayashi, H., Asai, S., Hikima, T., Takata, M., & Iwata, T. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201300406 · Cited by 33
Lv, R., He, Y., Wang, J., Wang, J., Hu, J. S., Zhang, J., & Hu, W. (2019) · Polymer · doi:10.1016/j.polymer.2019.04.061 · Cited by 27
Amorphous Fractions of Poly(lactic acid)
Righetti, M. C. (2017) · Advances in polymer science · doi:10.1007/12_2016_14 · Cited by 29
Tsuji, H., Yamasaki, M., & Arakawa, Y. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01099 · Cited by 25
Crystallization of Poly(lactic acid)
Lorenzo, M. L. D., & Androsch, R. (2015) · Wiley eBooks · doi:10.1002/9783527656950.ch5 · Cited by 32
Influence of the chain extension on the crystallization behavior of polylactide
Corre, Y., Maazouz, A., Reignier, J., & Duchet‐Rumeau, J. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23595 · Cited by 24
He, Y., Wu, T. S., Wei, J., Fan, Z., & Li, S. (2008) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21430 · Cited by 24
Wang, Y., Xu, Y., He, D., Yao, W., Liu, C., & Shen, C. (2014) · Materials Letters · doi:10.1016/j.matlet.2014.04.078 · Cited by 23
Tsuji, H., Tashiro, K., Bouapao, L., & Hanesaka, M. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200208 · Cited by 26
Zhao, Z., Yang, Q. Y., Coates, P. D., Whiteside, B., Kelly, A. L., Huang, Y., & Wu, P.-P. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b01597 · Cited by 24
Jiang, L., Lv, P., Ma, P., Bai, H., Dong, W., & Chen, M. (2015) · RSC Advances · doi:10.1039/c5ra12586c · Cited by 22
Solidification behavior of PLLA/nHA nanocomposites
Delabarde, C., Plummer, C. J. G., Bourban, P. ‐., & Månson, J. ‐. E. (2010) · Composites Science and Technology · doi:10.1016/j.compscitech.2010.04.024 · Cited by 23
Yang, B., Raza, S., Li, S., & Deng, J. (2017) · Polymer · doi:10.1016/j.polymer.2017.09.013 · Cited by 21
Lamellar Morphology of Disorder α′-Crystals of Poly( L -Lactic Acid)
Jariyavidyanont, K., Janke, A., Yu, Q., Thurn‐Albrecht, T., & Androsch, R. (2024) · Crystal Growth & Design · doi:10.1021/acs.cgd.3c01498 · Cited by 20
Highly Toughened Polylactide‐Based Materials through Melt‐Blending Techniques
Odent, J., Raquez, J., & Dúbois, P. (2015) · Wiley eBooks · doi:10.1002/9783527656950.ch10 · Cited by 23
Ublekov, F., Baldrián, J., Kratochvíl, J., Steinhart, M., & Nedkov, E. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35165 · Cited by 23
Tsai, W.-C., Hedenqvist, M. S., Laiback, Å., Melin, H., Ngo, M. P., Trollsås, M., & Gedde, U. W. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.02.005 · Cited by 20
Polylactic Acid from Renewable Resources
Gruber, P. R., Henton, D. E., & Starr, J. (2005) · Wiley eBooks · doi:10.1002/9783527619849.ch31 · Cited by 23
Dependence of the crystal structure on the d-units amount in semi-crystalline poly(lactic acid)
Molinari, G., Parlanti, P., Passaglia, E., Aiello, F., Gemmi, M., Lazzeri, A., & Righetti, M. C. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.136296 · Cited by 20
Ravari, F. B., Mashak, A., Nekoomanesh, M., & Mobedi, H. (2013) · Polymer Bulletin · doi:10.1007/s00289-013-0972-6 · Cited by 19
“[15] found that the crystallinity and spherulite growth decreased with increase in the content of D-lactide in PLLA.”
Background
Metadata
- Authors
- Baratian, S., Hall, E. S., Lin, J. S., Xu, R., & Runt, J.
- Affiliations
- Oak Ridge National Laboratory (US)
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-06-09
- Volume
- 34
- Issue
- 14
- Pages
- 4857-4864
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2040729039
- Cited by
- 148
- References
- 37
- Citations by year
- 2026: 2 · 2025: 4 · 2024: 6 · 2023: 3 · 2022: 6 · 2021: 4 · 2020: 2 · 2019: 8 · 2018: 4 · 2017: 9 · 2016: 11 · 2015: 9 · 2014: 6 · 2013: 10 · 2012: 13
- FWCI
- 4.81
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- random copolymers, crystallization, solid-state structure, spherulite growth rate, crystallinity, lamellar thickness, equilibrium melting point, meso-lactide, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.