The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Structure−Property Relationship in Biodegradable Poly(butylene succinate)/Layered Silicate Nanocomposites
Abstract
Understanding the structure−property relationship in polymer/layered silicate nanocomposites is of fundamental importance in designing materials with desired properties. To understand these relations in the case of poly(butylene succinate) (PBS)/organically modified layered silicate (OMLS) nanocomposites, we studied the rheological properties of these materials in detail, because the rheological behavior of polymer/OMLS nanocomposites is strongly influenced by their nanostructure and the interfacial characteristics. For this reason, a series of PBS/OMLS nanocomposites were prepared using a simple melt intercalation technique. Two different types of OMLS, montmorillonite (mmt) modified with octadecylammonium chloride and saponite (sap) modified with quaternary hexadecyl tri- n -butylphosphonium bromide, were used for the nanocomposite preparations. The structure of nanocomposites in the nanometer scale was characterized using wide-angle X-ray diffraction (WAXD) analyses and transmission electron microscopy (TEM) observations. A flocculated structure has a strong effect on mechanical properties (both in solid and melts) and various other materials properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Halpin‐Tsai equations: A review
Affdl, J. C. H., & Kardos, J. L. (1976) · Polymer Engineering & Science · doi:10.1002/pen.760160512 · Cited by 3,071
Correlation of dynamic and steady flow viscosities
Cox, W. P., & Merz, E. H. (1958) · Journal of Polymer Science · doi:10.1002/pol.1958.1202811812 · Cited by 2,092
Models for the Permeability of Filled Polymer Systems
Nielsen, L. E. (1967) · Journal of Macromolecular Science: Part A - Chemistry · doi:10.1080/10601326708053745 · Cited by 1,127
Rheology of End-Tethered Polymer Layered Silicate Nanocomposites
Krishnamoorti, R., & Giannelis, E. P. (1997) · Macromolecules · doi:10.1021/ma960550a · Cited by 779
Mineralogical Society of America
(2021) · Elements · doi:10.2138/gselements.17.1.58 · Cited by 685
Polymer alloys and blends: Thermodynamics and rheology
Higgins, J. S. (1990) · Polymer · doi:10.1016/0032-3861(90)90099-k · Cited by 680
Kinetics of Polymer Melt Intercalation
Vaia, R. A., Jandt, K. D., Kramer, E. J., & Giannelis, E. P. (1995) · Macromolecules · doi:10.1021/ma00128a016 · Cited by 665
Fujimaki, T. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00220-6 · Cited by 664
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607
Self-citationPolymer alloys and blends : thermodynamics and rheology
Utracki, L. A. (1990) · Medical Entomology and Zoology · Cited by 575
Cited by
Polymer nanotechnology: Nanocomposites
Paul, D. R., & Robeson, L. M. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.017 · Cited by 3,317
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Self-citationStructural and mechanical properties of polymer nanocomposites
Tjong, S. C. (2006) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2006.06.001 · Cited by 1,531
Potential perspectives of bio-nanocomposites for food packaging applications
Sorrentino, A., Gorrasi, G., & Vittoria, V. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.09.004 · Cited by 1,112
Nano-biocomposites: Biodegradable polyester/nanoclay systems
BORDES, P., POLLET, E., & AVEROUS, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.002 · Cited by 1,033
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
Manufacturing process of cellulose whiskers/polylactic acid nanocomposites
Oksman, K., Mathew, A. P., Bondeson, D., & Kvien, I. (2006) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.03.002 · Cited by 783
Novel anticorrosion coatings prepared from polyaniline/graphene composites
Chang, C.-H., Huang, T.-C., Peng, C.-W., Yeh, T.-C., Lu, H.-I., Hung, W.-I., Weng, C.-J., Yang, T.-I., & Yeh, J.-M. (2012) · Carbon · doi:10.1016/j.carbon.2012.06.043 · Cited by 728
50th Anniversary Perspective: Are Polymer Nanocomposites Practical for Applications?
Kumar, S. K., Benicewicz, B. C., Vaia, R. A., & Winey, K. I. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02330 · Cited by 628
An overview on the degradability of polymer nanocomposites
Pandey, J. K., Raghunatha Reddy, K., Pratheep Kumar, A., & Singh, R. P. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.09.013 · Cited by 584
Biopolymer chitosan/montmorillonite nanocomposites: Preparation and characterization
Wang, S. F., Shen, L., Tong, Y. J., Chen, L., Phang, I. Y., Lim, P. Q., & Liu, T. X. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.03.001 · Cited by 511
Flame retardant mechanism of polyamide 6–clay nanocomposites
Kashiwagi, T., Harris, R. H., Zhang, X., Briber, R. M., Cipriano, B. H., Raghavan, S. R., Awad, W. H., & Shields, J. R. (2004) · Polymer · doi:10.1016/j.polymer.2003.11.036 · Cited by 461
Papageorgiou, G. Z., Papageorgiou, D. G., Terzopoulou, Z., & Bikiaris, D. N. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.08.004 · Cited by 458
Ray, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
Self-citationA critical appraisal of polymer–clay nanocomposites
Chen, B., Evans, J. R. G., Greenwell, H. C., Boulet, P., Coveney, P. V., Bowden, A. A., & Whiting, A. (2008) · Chem. Soc. Rev. · doi:10.1039/b702653f · Cited by 416
A Review on Properties and Application of Bio-Based Poly(Butylene Succinate)
Rafiqah, S. A., Khalina, A., Harmaen, A. S., Tawakkal, I. A., Zaman, K., Asim, M., Nurrazi, M. N., & Lee, C. H. (2021) · Polymers · doi:10.3390/polym13091436 · Cited by 398
New Polylactide/Layered Silicate Nanocomposites, 6
Sinha Ray, S., & Okamoto, M. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300156 · Cited by 333
Self-citationNew polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties
Sinha Ray, S., Yamada, K., Okamoto, M., Fujimoto, Y., Ogami, A., & Ueda, K. (2003) · Polymer · doi:10.1016/j.polymer.2003.08.021 · Cited by 317
Self-citationUsuki, A., Hasegawa, N., Kato, M., & Kobayashi, S. (2005) · Advances in Polymer Science · doi:10.1007/b104481 · Cited by 301
Lewitus, D., McCarthy, S., Ophir, A., & Kenig, S. (2006) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0007-6 · Cited by 110
Enhancement of mechanical properties of PLA/PCL (80/20) blend by reinforcing with MMT nanoclay
Umamaheswara Rao, R., Venkatanarayana, B., & Suman, K. N. S. (2019) · Materials Today Proceedings · doi:10.1016/j.matpr.2019.06.280 · Cited by 45
Metadata
- Authors
- Sinha Ray, S., Okamoto, K., & Okamoto, M.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-03-06
- Volume
- 36
- Issue
- 7
- Pages
- 2355-2367
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2104128873
- Cited by
- 636
- References
- 31
- FWCI
- 23.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.