Melt Chain Dimensions of Polylactide
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Melt chain dimensions of two polylactide samples were measured using small-angle neutron scattering. Three polylactides were synthesized: a deuterated polylactide containing 26% R-stereocenters (d-PLA-26), a hydrogenous polylactide with an R-content similar to the deuterated polylactide (PLA-28), and a hydrogenous polylactide that contained no R-stereocenters (PLA-0). The hydrogenous polylactides were each solution blended with the d-PLA-26 at a volume fraction of 0.2 for the deuterated polymer, and the melt chain dimensions of these polymers were determined. Small-angle neutron scattering experiments were performed at 30 °C for the d-PLA-26/PLA-28 blend and at 200 °C for both the d-PLA-26/PLA-28 and d-PLA-26/PLA-0 blends. Using three analysis methods, the average values for the statistical segment lengths, based on a C 6 repeat unit, were found to be 10.0 ± 0.2 Å for the PLA-28 at 30 °C, 8.9 ± 0.2 Å for the PLA-28 at 200 °C, and 9.9 ± 0.4 Å for the PLA-0 at 200 °C.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fetters, L. J., Lohse, D. J., Richter, D., Witten, T. A., & Zirkel, A. (1994) · Macromolecules · doi:10.1021/ma00095a001 · Cited by 1,999
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Ordered Nanoporous Polymers from Polystyrene−Polylactide Block Copolymers
Zalusky, A. S., Olayo-Valles, R., Wolf, J. H., & Hillmyer, M. A. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0278584 · Cited by 553
Self-citationPreparation of asymmetric 3-arm polybutadiene and polystyrene stars
Pennisi, R. W., & Fetters, L. J. (1988) · Macromolecules · doi:10.1021/ma00182a041 · Cited by 102
Cited by
Branched polyesters: recent advances in synthesis and performance
McKee, M. G., Unal, S., Wilkes, G. L., & Long, T. E. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2005.01.009 · Cited by 316
Influence of Polydispersity on the Self-Assembly of Diblock Copolymers
Lynd, N. A., & Hillmyer, M. A. (2005) · Macromolecules · doi:10.1021/ma051025r · Cited by 309
Self-citationThermal processing of diblock copolymer melts mimics metallurgy
Kim, K., Schulze, M. W., Arora, A., Lewis, R. M., Hillmyer, M. A., Dorfman, K. D., & Bates, F. S. (2017) · Science · doi:10.1126/science.aam7212 · Cited by 295
Self-citationPolylactide–Poly(6-methyl-ε-caprolactone)–Polylactide Thermoplastic Elastomers
Martello, M. T., & Hillmyer, M. A. (2011) · Macromolecules · doi:10.1021/ma201063t · Cited by 137
Self-citationMartello, M. T., Schneiderman, D. K., & Hillmyer, M. A. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500412a · Cited by 120
Self-citation
Metadata
- Authors
- Anderson, K. S., & Hillmyer, M. A.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-02-13
- Volume
- 37
- Issue
- 5
- Pages
- 1857-1862
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2135102010
- Cited by
- 54
- References
- 4
- FWCI
- 1.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Melt Chain Dimensions of Polylactide. https://app.cochat.ai/papers/10.1021/ma0357523
- The paper
- Anderson, K. S., & Hillmyer, M. A. (2004). Melt Chain Dimensions of Polylactide. Macromolecules. https://doi.org/10.1021/ma0357523
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.