The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Morphology and Mechanical Properties of Multiwalled Carbon Nanotubes Reinforced Nylon-6 Composites
Abstract
Multiwalled carbon nanotubes (MWNTs)/nylon-6 (PA6) nanocomposites with different MWNTs loadings have been prepared by the simple melt-compounding approach. A fine and homogeneous dispersion of MWNTs throughout PA6 matrix is observed by transmission electron microscopy. Scanning electron microscopy observation on the fracture surfaces of the composites shows not only a uniform dispersion of MWNTs but also a strong interfacial adhesion with the matrix, as evidenced by the presence of many broken but strongly embedded carbon nanotubes (CNTs) in the matrix and by the absence of debonding of CNTs from the matrix. Beadlike morphology is also observed along the stretched CNTs and their bundles, probably indicating the anchoring locations of the CNTs defects (within the beads) along the tubes where the PA6 matrix has strong interfacial interactions with the CNTs, thus being favorable to stress transfer from polymer to CNTs. Mechanical testing (by tensile and nanoindentation tests as well as dynamic mechanical analysis) shows that, compared with neat PA6, the elastic modulus and the yield strength of the composite are greatly improved by about 214% and 162%, respectively, with incorporating only 2 wt % MWNTs. In addition, a unique crystallization and melting behavior of MWNTs/PA6 composites are observed and discussed by combining differential scanning calorimetry and X-ray diffraction; that is, only the α-form crystals are observed in MWNTs/PA6 composites, which is quite different from the case observed in PA6/clay nanocomposites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Carbon Nanotubes--the Route Toward Applications
Baughman, R. H., Zakhidov, A. A., & de Heer, W. A. (2002) · Science · doi:10.1126/science.1060928 · Cited by 10,267
Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites
Qian, D., Dickey, E. C., Andrews, R., & Rantell, T. (2000) · Applied Physics Letters · doi:10.1063/1.126500 · Cited by 2,455
Mechanical properties of nylon 6-clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1185 · Cited by 2,442
Functionalization of Single-Walled Carbon Nanotubes
Hirsch, A. (2002) · Angewandte Chemie International Edition · doi:10.1002/1521-3773(20020603)41:11<1853::aid-anie1853>3.0.co;2-n · Cited by 2,146
Load transfer in carbon nanotube epoxy composites
Schadler, L. S., Giannaris, S. C., & Ajayan, P. M. (1998) · Applied Physics Letters · doi:10.1063/1.122911 · Cited by 1,657
Aligned Carbon Nanotube Arrays Formed by Cutting a Polymer Resin—Nanotube Composite
Ajayan, P. M., Stéphan, O., Colliex, C., & Trauth, D. (1994) · Science · doi:10.1126/science.265.5176.1212 · Cited by 1,553
Super-tough carbon-nanotube fibres
Dalton, A. B., Collins, S., Muñoz, E., Razal, J. M., Ebron, V. H., Ferraris, J. P., Coleman, J. N., Kim, B. G., & Baughman, R. H. (2003) · Nature · doi:10.1038/423703a · Cited by 1,521
Single-Walled Carbon Nanotube-Polymer Composites: Strength and Weakness
Ajayan, P. M., Schadler, L. S., Giannaris, C., & Rubio, A. (2000) · Advanced Materials · doi:10.1002/(sici)1521-4095(200005)12:10<750::aid-adma750>3.0.co;2-6 · Cited by 1,435
Aligned single-wall carbon nanotubes in composites by melt processing methods
Haggenmueller, R., Gommans, H. H., Rinzler, A. G., Fischer, J. E., & Winey, K. I. (2000) · Chemical Physics Letters · doi:10.1016/s0009-2614(00)01013-7 · Cited by 1,058
Structure and Dynamics of Polymer-Layered Silicate Nanocomposites
Krishnamoorti, R., Vaia, R. A., & Giannelis, E. P. (1996) · Chemistry of Materials · doi:10.1021/cm960127g · Cited by 1,001
Terrones, M. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.012802.100255 · Cited by 973
Surfactant-Assisted Processing of Carbon Nanotube/Polymer Composites
Gong, X., Liu, J., Baskaran, S., Voise, R. D., & Young, J. S. (2000) · Chemistry of Materials · doi:10.1021/cm9906396 · Cited by 957
Collins, P. G., & Avouris, P. (2000) · Scientific American · doi:10.1038/scientificamerican1200-62 · Cited by 912
Stress-induced fragmentation of multiwall carbon nanotubes in a polymer matrix
Wagner, H. D., Lourie, O., Feldman, Y., & Tenne, R. (1998) · Applied Physics Letters · doi:10.1063/1.120680 · Cited by 893
Fabrication of Carbon Multiwall Nanotube/Polymer Composites by Shear Mixing
Andrews, R. J., Jacques, D., Minot, M., & Rantell, T. D. (2002) · Macromolecular Materials and Engineering · doi:10.1002/1439-2054(20020601)287:6 · Cited by 700
Multiwalled carbon nanotube polymer composites: Synthesis and characterization of thin films
Safadi, B., Andrews, R., & Grulke, E. A. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10436 · Cited by 558
Deformation of carbon nanotubes in nanotube–polymer composites
Bower, C., Rosen, R., Jin, L., Han, J., & Zhou, O. (1999) · Applied Physics Letters · doi:10.1063/1.123330 · Cited by 490
Enhancement of adsorption inside of single-walled nanotubes: opening the entry ports
Kuznetsova, A., Mawhinney, D. B., Naumenko, V., Yates, J. T., Liu, J., & Smalley, R. E. (2000) · Chemical Physics Letters · doi:10.1016/s0009-2614(00)00341-9 · Cited by 463
Distribution and alignment of carbon nanotubes and nanofibrils in a polymer matrix
Cooper, C. A., Ravich, D., Lips, D., Mayer, J., & Wagner, H. D. (2002) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00056-8 · Cited by 405
Effects of nanotube waviness on the modulus of nanotube-reinforced polymers
Fisher, F. T., Bradshaw, R. D., & Brinson, L. C. (2002) · Applied Physics Letters · doi:10.1063/1.1487900 · Cited by 303
McCarthy, B., Coleman, J. N., Czerw, R., Dalton, A. B., in het Panhuis, M., Maiti, A., Drury, A., Bernier, P., Nagy, J. B., Lahr, B., et al. (2002) · The Journal of Physical Chemistry B · doi:10.1021/jp013745f · Cited by 237
Koshio, A., Yudasaka, M., Zhang, M., & Iijima, S. (2001) · Nano Letters · doi:10.1021/nl0155431 · Cited by 217
Patterned Films of Nanotubes Using Microcontact Printing of Catalysts
Kind, H., Bonard, J.-M., Emmenegger, C., Nilsson, L.-O., Hernadi, K., Maillard-Schaller, E., Schlapbach, L., Forró, L., & Kern, K. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199910)11:15<1285::aid-adma1285>3.0.co;2-j · Cited by 195
Melting Behavior of Polymorphics: Molecular Weight Dependence and Steplike Mechanisms in Nylon-6
Medellín‐Rodríguez, F. J., Larios‐López, L., Zapata-Espinosa, A., Davalos-Montoya, O., Phillips, P. J., & Lin, J. S. (2004) · Macromolecules · doi:10.1021/ma030466c · Cited by 72
Polymer-Filled Nematics: A New Class of Light-Scattering Materials for Electro-Optical Switches
van Boxtel, M. C. W., Janssen, R. H. C., Broer, D. J., Wilderbeek, H. T. A., & Bastiaansen, C. W. M. (2000) · Advanced Materials · Cited by 66
Time-resolved terahertz emission spectroscopy of wide miniband GaAs/AlGaAs superlattices
Shimada, Y., Hirakawa, K., & Lee, S.-W. (2002) · Applied Physics Letters · doi:10.1063/1.1503401 · Cited by 33
Cited by
Tasis, D., Tagmatarchis, N., Bianco, A., & Prato, M. (2006) · Chemical Reviews · doi:10.1021/cr050569o · Cited by 4,273
Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites
Coleman, J. N., Khan, U., Blau, W. J., & Gun’ko, Y. K. (2006) · Carbon · doi:10.1016/j.carbon.2006.02.038 · Cited by 4,071
Carbon nanotube–polymer composites: Chemistry, processing, mechanical and electrical properties
Spitalsky, Z., Tasis, D., Papagelis, K., & Galiotis, C. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.09.003 · Cited by 3,125
Mechanical Reinforcement of Polymers Using Carbon Nanotubes
Coleman, J. N., Khan, U., & Gun'ko, Y. K. (2006) · Advanced Materials · doi:10.1002/adma.200501851 · Cited by 1,621
Structural and mechanical properties of polymer nanocomposites
Tjong, S. C. (2006) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2006.06.001 · Cited by 1,531
Metadata
- Authors
- Liu, Phang, I. Y., Shen, L., Chow, S. Y., & Zhang, W.-D.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-08-24
- Volume
- 37
- Issue
- 19
- Pages
- 7214-7222
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2000430948
- Cited by
- 789
- References
- 27
- FWCI
- 17.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.