The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
All-Cellulose Composite
Abstract
An all -cellulose composite, in which both the fibers and the matrix are cellulose, was prepared by distinguishing the solubility of the matrix cellulose into the solvent from that of the fibers through pretreatment. The structure, mechanical, and thermal properties of this composite were investigated using an X-ray diffraction, a scanning electron microscope, a tensile test, and dynamic viscoelastic and thermomechanical analyses. The tensile strength of uniaxially reinforced all-cellulose composite was 480 MPa at 25 °C, and the dynamic storage modulus was as high as 20 GPa at 300 °C. These were comparable or even higher than those of conventional glass-fiber-reinforced composites. In addition, a linear thermal expansion coefficient was about 10 -7 K -1 . This all-cellulose composite shows substantial advantages, that is, it is composed of sustainable resources, there is less interface between the fiber and the matrix, it possesses excellent mechanical and thermal performance during use, and it is biodegradable after the service.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Nishiyama, Y., Langan, P., & Chanzy, H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja0257319 · Cited by 3,028
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,151
Mechanical properties of polymers and composites
Moore, D. R. (1975) · Polymer · doi:10.1016/0032-3861(75)90022-1 · Cited by 1,477
An Introduction to Composite Materials
Hull, D., & Clyne, T. W. (1996) · Cambridge University Press eBooks · doi:10.1017/cbo9781139170130 · Cited by 1,450
X-Ray diffraction methods in polymer science
Saro, A. (1970) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(70)90270-5 · Cited by 1,170
Behaviour of Single Wood Fibres under Axial Tensile Strain
PAGE, D. H., EL-HOSSEINY, F., & WINKLER, K. (1971) · Nature · doi:10.1038/229252a0 · Cited by 230
Peijs, T. (2003) · Materials Today · doi:10.1016/s1369-7021(03)00428-0 · Cited by 175
Nakamae, K., Nishino, T., Shimizu, Y., & Matsumoto, T. (1987) · Polymer Journal · doi:10.1295/polymj.19.451 · Cited by 67
Self-citation
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Ionic Liquids and Their Interaction with Cellulose
Pinkert, A., Marsh, K. N., Pang, S., & Staiger, M. P. (2009) · Chemical Reviews · doi:10.1021/cr9001947 · Cited by 1,508
Zhang, H., Wu, J., Zhang, J., & He, J. (2005) · Macromolecules · doi:10.1021/ma0505676 · Cited by 1,437
Nanocomposites for food packaging applications
Azeredo, H. M. C. D. (2009) · Food Research International · doi:10.1016/j.foodres.2009.03.019 · Cited by 1,259
Optically Transparent Nanofiber Paper
Nogi, M., Iwamoto, S., Nakagaito, A. N., & Yano, H. (2009) · Advanced Materials · doi:10.1002/adma.200803174 · Cited by 1,074
Current characterization methods for cellulose nanomaterials
Foster, E. J., Moon, R. J., Agarwal, U. P., Bortner, M. J., Bras, J., Camarero-Espinosa, S., Chan, K. J., Clift, M. J. D., Cranston, E. D., Eichhorn, S. J., et al. (2018) · Chemical Society Reviews · doi:10.1039/c6cs00895j · Cited by 1,021
Recent advances in surface-modified cellulose nanofibrils
Rol, F., Belgacem, M. N., Gandini, A., & Bras, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.09.002 · Cited by 698
Gandini, A. (2011) · Green Chemistry · doi:10.1039/c0gc00789g · Cited by 695
Cellulose reinforced polymer composites and nanocomposites: a critical review
Miao, C., & Hamad, W. Y. (2013) · Cellulose · doi:10.1007/s10570-013-0007-3 · Cited by 630
From monomers to polymers from renewable resources: Recent advances
Gandini, A., & Lacerda, T. M. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.11.002 · Cited by 620
Wood-based nanotechnologies toward sustainability
Jiang, F., Li, T., Li, Y., Zhang, Y., Gong, A., Dai, J., Hitz, E., Luo, W., & Hu, L. (2018) · Advanced Materials · doi:10.1002/adma.201703453 · Cited by 599
Chemically and mechanically isolated nanocellulose and their self-assembled structures
Jiang, F., & Hsieh, Y.-L. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.02.022 · Cited by 586
Bogoeva‐Gaceva, G., Avella, M., Malinconico, M., Buzarovska, A., Grozdanov, A., Gentile, G., & Errico, M. E. (2007) · Polymer Composites · doi:10.1002/pc.20270 · Cited by 521
Nogi, M., & Yano, H. (2008) · Advanced Materials · doi:10.1002/adma.200702559 · Cited by 512
Chitin nanofibers: preparations, modifications, and applications
Ifuku, S., & Saimoto, H. (2012) · Nanoscale · doi:10.1039/c2nr30383c · Cited by 490
A critical review of all-cellulose composites
Huber, T., Müssig, J., Curnow, O., Pang, S., Bickerton, S., & Staiger, M. P. (2012) · Journal of Materials Science · doi:10.1007/s10853-011-5774-3 · Cited by 451
Thermal stabilization of TEMPO-oxidized cellulose
Fukuzumi, H., Saito, T., Okita, Y., & Isogai, A. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.06.015 · Cited by 421
Cherian, B. M., Pothan, L. A., Nguyen-Chung, T., Mennig, G., Kottaisamy, M., & Thomas, S. (2008) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf8003674 · Cited by 363
Cellulose nanocrystal isolation from tomato peels and assembled nanofibers
Jiang, F., & Hsieh, Y.-L. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.12.064 · Cited by 329
Bio-Based Polymers with Potential for Biodegradability
Garrison, T., Murawski, A., & Quirino, R. (2016) · Polymers · doi:10.3390/polym8070262 · Cited by 319
Structure and properties of the nanocomposite films of chitosan reinforced with cellulose whiskers
Li, Q., Zhou, J., & Zhang, L. (2009) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21711 · Cited by 311
The strength and stiffness of oriented wood and cellulose-fibre materials: A review
Jakob, M., Mahendran, A. R., Gindl-Altmutter, W., Bliem, P., Konnerth, J., Müller, U., & Veigel, S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100916 · Cited by 292
Nanotechnology and its applications in lignocellulosic composites, a mini review
Kamel, S. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.78 · Cited by 271
Nanofibrillation of Wood Pulp Using a High-Speed Blender
Uetani, K., & Yano, H. (2011) · Biomacromolecules · doi:10.1021/bm101103p · Cited by 258
Qi, H., Cai, J., Zhang, L., & Kuga, S. (2009) · Biomacromolecules · doi:10.1021/bm9001975 · Cited by 253
Harini, K., Ramya, K., & Sukumar, M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.08.081 · Cited by 192
Ji, S., Hyun, B. G., Kim, K., Lee, S. Y., Kim, S.-H., Kim, J.-Y., Song, M. H., & Park, J.-U. (2016) · NPG Asia Materials · doi:10.1038/am.2016.113 · Cited by 105
Creep behavior of starch-based nanocomposite films with cellulose nanofibrils
Li, M., Li, D., Wang, L.-J., & Adhikari, B. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.10.023 · Cited by 69
Metadata
- Authors
- Nishino, T., Matsuda, I., & Hirao, K.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-09-11
- Volume
- 37
- Issue
- 20
- Pages
- 7683-7687
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2066723842
- Cited by
- 802
- References
- 9
- FWCI
- 5.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
