Ring-Opening Polymerization of ε-Caprolactone Initiated with Titanium n-Propoxide or Titanium Phenoxide
The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Abstract
Ring-opening polymerization of ε-caprolactone initiated by titanium n -propoxide Ti(O- n -Pr) 4 was compared to the one initiated by titanium phenoxide or Ti(OPh) 4 . Polymerization was confirmed to proceed via a coordination−insertion mechanism for both initiators after end groups analysis by 1 H and 13 C NMR (nuclear magnetic resonance) spectroscopy. Bulk polymerization at 100 °C and with a M 0 / I 0 (monomer/initiator ratio) equal to 300 was studied and compared with both initiators. The polymerization with Ti(OPh) 4 exhibits a slower kinetic of reaction and the polymer synthesized an higher number-average molecular weight and higher polydispersity than with Ti(OPr) 4 . These results are consistent with evolution of the average number of active aryloxide groups per initiator ( ) during polymerization for this initiator. Indeed, determined by 1 H NMR increases gradually during the polymerization to 2 for around 70% conversion and then decreases at the end of the polymerization and even over the time required for total conversion. This decrease of at the end of the conversion may be explained by important transesterification reactions with phenoxyl end groups of the polymer, which lead to the formation of larger poly(ε-caprolactone) chains. That is consistent with the increase in the number-average molecular weight of the polymer beyond the end of the conversion. The rheological study also confirms this result.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Controlled Ring-Opening Polymerization of Lactide and Glycolide
Dechy-Cabaret, O., Martin-Vaca, B., & Bourissou, D. (2004) · Chemical Reviews · doi:10.1021/cr040002s · Cited by 2,257
Polymerization of l,l-Lactide Initiated by Aluminum Isopropoxide Trimer or Tetramer
Kowalski, A., Duda, A., & Penczek, S. (1998) · Macromolecules · doi:10.1021/ma971737k · Cited by 470
Kinetics and Mechanism of the Stannous Octoate-Catalyzed Bulk Polymerization of ε-Caprolactone
Storey, R. F., & Sherman, J. W. (2002) · Macromolecules · doi:10.1021/ma010986c · Cited by 289
Enzymatic polymerization: A new method of polymer synthesis
Kobayashi, S. (1999) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/(sici)1099-0518(19990815)37:16<3193::aid-pola17>3.0.co;2-r · Cited by 270
Schindler, A., Hibionada, Y. M., & Pitt, C. G. (1982) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1982.170200206 · Cited by 193
Mechanism of ε-Caprolactone polymerization by Aluminum Alkoxides
Ouhadi, T., Stevens, C. V., & Teyssié, P. (1975) · Die Makromolekulare Chemie · doi:10.1002/macp.1975.020011975112 · Cited by 147
Dobrzyński, P., Kasperczyk, J., & Bero, M. (1999) · Macromolecules · doi:10.1021/ma981969z · Cited by 133
Novel Zinc and Magnesium Alkyl and Amido Cations for Ring-Opening Polymerization Reactions
Sarazin, Y., Schormann, M., & Bochmann, M. (2004) · Organometallics · doi:10.1021/om0497691 · Cited by 132
Ling, J., Zhu, W., & Shen, Z. (2004) · Macromolecules · doi:10.1021/ma035352f · Cited by 109
Effect of hydrogen on ethylene polymerization using in-situ supported metallocene catalysts
Chu, K.-J., Soares, J. B. P., & Penlidis, A. (2000) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(20000301)201:5<479::aid-macp479>3.0.co;2-f · Cited by 52
Research works printed but not linked: 28
- Loefgren A., 1995, J. Macromol. Sci. Rev. Macromol. Chem. Phys., 35, 418
- Penczek S., 2000, J. Polym. Sci., Polym. Chem., 38, 1933
- Kubisa P., 1999, Prog. Polym. Sci., 24, 1437
- Mecerreyes D., 1999, Adv. Polym. Sci., 147, 59
- Kricheldorf H. R., 1996, Symp.
- Kricheldorf H. R., 1986, Makromol. Chem., 187, 785
- Kricheldorf H. R., 1986, Makromol. Chem., 187, 1625
- Hofman A., 1984, Makromol. Chem., 185, 667
- Hofman A., 1984, Makromol. Chem., 185, 101
- Kricheldorf H. R., 1990, Macromol. Symp.
- Kricheldorf H. R., 1988, Macromolecules, 21, 293
- Dubois, 1993, Macromolecules, 26, 4412
- Lecomte, 2004, Macromol. Symp.
- Stridsberg K., 1999, J. Polym. Sci., Polym. Chem., 37, 3417, 10.1002/(SICI)1099-0518(19990815)37:16<3407::AID-POLA40>3.0.CO;2-X · DOI
- Kowalski A., 2000, Macromolecules, 33, 695
- Liu Y. C., 2001, Macromolecules, 34, 6201
- Chen H. L., 2001, Organometallics, 20, 5083
- Shen Z. Q., 1995, Polym. J., 27, 64
- Yasmashita M., 1996, Macromolecules, 29, 1806
- Yu C., 2003, Eur. Polym. J., 39, 2039
- Takeuchi D., 2000, Macromolecules, 33, 729
- Chen C.-T., 2004, Macromolecules, 37, 7973
- Hsueh M.-L., 2002, Macromolecules, 35, 5768
- Storey R. F., 2002, Macromolecules, 35, 1512, 10.1021/ma010986c · DOI · Paper page
- Malhotra K. C., 1982, J. Orgametal. Chem., 239, 187
- Chisholm, M. H.; Rothwell, I. P. InComprehensive CoordinationChemistry; Wikinson, G., Gillard, R. D., McCleverty, J. A., Eds.; Pergamon Press: Oxford, U.K., 1987; Vol. 2, pp 335−364.
- Baran J., 1997, Macromol. Symp.
- Penczek S., 1998, Macromol. Symp.
Cited by
Mondal, D., Griffith, M., & Venkatraman, S. S. (2016) · International Journal of Polymeric Materials and Polymeric Biomaterials · doi:10.1080/00914037.2015.1103241 · Cited by 515
Metal catalysts for ε-caprolactone polymerisation
Arbaoui, A., & Redshaw, C. (2010) · Polymer Chemistry · doi:10.1039/b9py00334g · Cited by 383
Synthesis and Properties of Cyclic Polymers
Endo, K. (2009) · New Frontiers in Polymer Synthesis · doi:10.1007/12_2008_157 · Cited by 166
Polycaprolactone-based materials in wound healing applications
Raina, N., Pahwa, R., Khosla, J. K., Gupta, P. N., & Gupta, M. (2021) · Polymer Bulletin · doi:10.1007/s00289-021-03865-w · Cited by 148
Yuan, W., Yuan, J., Zhang, F., & Xie, X. (2007) · Biomacromolecules · doi:10.1021/bm0610018 · Cited by 124
Reactive Processing of Thermoplastic Polymers: A Review of the Fundamental Aspects
Cassagnau, P., Bounor‐Legaré, V., & Fenouillot, F. (2007) · International Polymer Processing · doi:10.3139/217.2032 · Cited by 134
Self-citationIwasa, N., Katao, S., Liu, J.-Y., Fujiki, M., Furukawa, Y., & Nomura, K. (2009) · Organometallics · doi:10.1021/om8011882 · Cited by 119
Yao, W., Mu, Y., Gao, A., Gao, W., & Ye, L. (2008) · Dalton Transactions · doi:10.1039/b719017d · Cited by 107
Iwasa, N., Fujiki, M., & Nomura, K. (2008) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2008.06.009 · Cited by 101
Schwarz, A. D., Thompson, A. L., & Mountford, P. (2009) · Inorganic Chemistry · doi:10.1021/ic901524s · Cited by 91
Liu, J., Iwasa, N., & Nomura, K. (2008) · Dalton Transactions · doi:10.1039/b801561a · Cited by 87
Enzymatic synthesis of poly(hydroxyalkanoates) in ionic liquids
Gorke, J. T., Okrasa, K., LOUWAGIE, A., Kazlauskas, R. J., & Srienc, F. (2007) · Journal of Biotechnology · doi:10.1016/j.jbiotec.2007.04.001 · Cited by 78
Recent advances on tailor-made titanium catalysts for biopolymer synthesis
Roux, E. L. (2015) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.06.006 · Cited by 79
Titanium pyridonates and amidates: novel catalysts for the synthesis of random copolymers
Webster, R. L., Noroozi, N., Hatzikiriakos, S. G., Thomson, J. A., & Schafer, L. L. (2012) · Chemical Communications · doi:10.1039/c2cc37201k · Cited by 75
Zhao, H., Nathaniel, G. A., & Merenini, P. C. (2017) · RSC Advances · doi:10.1039/c7ra09038b · Cited by 67
Yao, W., Mu, Y., Gao, A., Su, Q., Liu, Y., & Zhang, Y. (2008) · Polymer · doi:10.1016/j.polymer.2008.03.035 · Cited by 65
Gowda, R. R., & Chakraborty, D. (2009) · Journal of Molecular Catalysis A: Chemical · doi:10.1016/j.molcata.2008.11.010 · Cited by 59
Ling, J., Shen, J., & Hogen-Esch, T. E. (2009) · Polymer · doi:10.1016/j.polymer.2009.06.006 · Cited by 58
Saha, T., Mandal, M., Chakraborty, D., & Ramkumar, V. (2013) · New Journal of Chemistry · doi:10.1039/c3nj40916c · Cited by 57
Dobrzyński, P. (2007) · Polymer · doi:10.1016/j.polymer.2007.02.005 · Cited by 52
Boujemaoui, A., Carlsson, L., Malmström, E., Lahcini, M., Berglund, L. A., Sehaqui, H., & Carlmark, A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300537h · Cited by 49
Pappuru, S., Chokkapu, E. R., Chakraborty, D., & Ramkumar, V. (2013) · Dalton Transactions · doi:10.1039/c3dt52065j · Cited by 47
Titanium pyridonates for the homo- and copolymerization of rac-lactide and ε-caprolactone
Gilmour, D. J., Webster, R. L., Perry, M. R., & Schafer, L. L. (2015) · Dalton Transactions · doi:10.1039/c5dt01162k · Cited by 51
Ojwach, S. O., Okemwa, T. T., Attandoh, N. W., & Omondi, B. O. (2013) · Dalton Transactions · doi:10.1039/c3dt51338f · Cited by 43
Synthesis of EVA-g-PLA copolymers using transesterification reactions
Moura, I., Nogueira, R., Bounor‐Legaré, V., & Machado, A. V. (2012) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2012.02.036 · Cited by 42
Self-citationDu, G., Wei, Y., Zhang, W., Dong, Y., Lin, Z., He, H., Zhang, S., & Li, X. (2012) · Dalton Transactions · doi:10.1039/c2dt31932b · Cited by 41
Barlier, V. S., Bounor‐Legaré, V., Boiteux, G., Davenas, J., & Léonard, D. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.02.076 · Cited by 41
Self-citationSaha, T., Rajashekhar, B., & Chakraborty, D. (2011) · RSC Advances · doi:10.1039/c1ra00543j · Cited by 42
Rajashekhar, B., Roymuhury, S. K., Chakraborty, D., & Ramkumar, V. (2015) · Dalton Transactions · doi:10.1039/c5dt02267c · Cited by 38
Gowda, R. R., Chakraborty, D., & Ramkumar, V. (2009) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.200900280 · Cited by 38
Meelua, W., Molloy, R., Meepowpan, P., & Punyodom, W. (2012) · Journal of Polymer Research · doi:10.1007/s10965-011-9799-8 · Cited by 35
Piskun, Y. A., Vasilenko, I. V., Kostjuk, S. V., Zaitsev, K. V., Zaitseva, G. S., & Karlov, S. S. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23886 · Cited by 35
Chakraborty, D., Mandal, D., Ramkumar, V., Subramanian, V., & Vijaya Sundar, J. (2015) · Polymer · doi:10.1016/j.polymer.2014.10.074 · Cited by 33
Lapenta, R., Mazzeo, M., & Grisi, F. (2015) · RSC Advances · doi:10.1039/c5ra15599a · Cited by 32
Bahloul, W., Bounor‐Legaré, V., Fenouillot, F., & Cassagnau, P. (2009) · Polymer · doi:10.1016/j.polymer.2009.03.055 · Cited by 33
Self-citationMandal, M., Ramkumar, V., & Chakraborty, D. (2019) · Polymer Chemistry · doi:10.1039/c8py01750f · Cited by 34
Pappalardo, D., Annunziata, L., Pellecchia, C., Biesemans, M., & Willem, R. (2007) · Macromolecules · doi:10.1021/ma0623486 · Cited by 32
Plommer, H., Murphy, J. N., Dawe, L. N., & Kerton, F. M. (2019) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.9b00347 · Cited by 32
Bikiaris, D. Ν., Nanaki, & Pantopoulos (2011) · International Journal of Nanomedicine · doi:10.2147/ijn.s26568 · Cited by 31
Gao, A., Mu, Y., Zhang, J., & Yao, W. (2009) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.200900158 · Cited by 33
Zikode, M., Ojwach, S. O., & Akerman, M. P. (2015) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2015.12.008 · Cited by 30
Attandoh, N. W., Ojwach, S. O., & Munro, O. Q. (2014) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201402049 · Cited by 27
Zhang, L., Niu, Y., Wang, Y., Wang, P., & Shen, L. (2008) · Journal of Molecular Catalysis A Chemical · doi:10.1016/j.molcata.2008.02.017 · Cited by 27
Schappacher, M., Hellaye, M. L., Bareille, R., Durrieu, M., & Guillaume, S. M. (2009) · Macromolecular Bioscience · doi:10.1002/mabi.200900184 · Cited by 27
Group 4 Complexes of atert-Butylphosphine-Bridged Biphenolate Ligand
Liang, L., Hsu, Y., & Lin, S. (2011) · Inorganic Chemistry · doi:10.1021/ic102194z · Cited by 26
Copolyesters as non‐toxic plasticizers
Zhou, J., & Ritter, H. (2011) · Polymer International · doi:10.1002/pi.3122 · Cited by 26
Gao, A., Yao, W., Mu, Y., Gao, W., Sun, M., & Su, Q. (2009) · Polyhedron · doi:10.1016/j.poly.2009.05.037 · Cited by 28
Ring opening polymerization of ε-caprolactone through water
Atta, S., Cohen, J. P., Kohn, J., & Gormley, A. J. (2020) · Polymer Chemistry · doi:10.1039/d0py01481h · Cited by 25
Pérez, Y., del Hierro, I., Zazo, L. J. G., Fernández‐Galán, R., & Fajardo, M. (2015) · Dalton Transactions · doi:10.1039/c4dt03385j · Cited by 26
Lai, W., & Wu, G. (2019) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2019.02.020 · Cited by 25
Li, P., Zerroukhi, A., Chen, J., Chalamet, Y., Jeanmaire, T., & Xia, Z. (2009) · Polymer · doi:10.1016/j.polymer.2009.01.013 · Cited by 26
Gowda, R. R., Chakraborty, D., & Ramkumar, V. (2010) · Journal of Organometallic Chemistry · doi:10.1016/j.jorganchem.2010.09.026 · Cited by 23
Zhou, S., Yin, C., Wang, H., Zhu, X., Yang, G., & Wang, S. (2011) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2011.04.015 · Cited by 21
Roymuhury, S. K., Mandal, M., Chakraborty, D., & Ramkumar, V. (2021) · Polymer Chemistry · doi:10.1039/d1py00237f · Cited by 21
Rapid ring‐opening polymerization of 1,4‐dioxan‐2‐one initiated by titanium alkoxides
Zeng, J., Srinivansan, M., Li, Y., Narayan, R., & Wang, Y. (2010) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.24399 · Cited by 21
Synthesis and characterizations of novel acid functionalized and fluorescent poly(ε-caprolactone)
Chen, H.-H., Anbarasan, R., Kuo, L.-S., & Chen, P. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-5003-5 · Cited by 19
Gowda, R. R., Chakraborty, D., & Ramkumar, V. (2010) · Polymer · doi:10.1016/j.polymer.2010.08.031 · Cited by 19
Zhu, D., Guo, L., Zhang, W., Hu, X., Nomura, K., Vignesh, A., Hao, X., Zhang, Q., & Sun, W. (2019) · Dalton Transactions · doi:10.1039/c9dt00137a · Cited by 19
Random copolymerisations catalysed by simple titanium α-amino acid complexes
Webster, R. L. (2013) · RSC Advances · doi:10.1039/c3ra45810e · Cited by 18
Zhang, Q., Zhang, W., Rajendran, N. M., Liang, T., & Sun, W. (2017) · Dalton Transactions · doi:10.1039/c7dt01720k · Cited by 18
Zikode, M., Ojwach, S. O., & Akerman, M. P. (2016) · Applied Organometallic Chemistry · doi:10.1002/aoc.3556 · Cited by 17
Lu, N., Jiang, Z., Pei, H., Liu, W., Li, Y., & Dong, Y. (2016) · European Journal of Inorganic Chemistry · doi:10.1002/ejic.201601375 · Cited by 19
Polymer Delivery Systems for Long-Acting Antiretroviral Drugs
Nayan, M. U., Panja, S., Sultana, A., Zaman, L. A., Vora, L. K., Sillman, B., Gendelman, H. E., & Edagwa, B. (2024) · Pharmaceutics · doi:10.3390/pharmaceutics16020183 · Cited by 21
Tin (IV) alkoxide initiator design for poly (d-lactide) synthesis using DFT calculations
Lawan, N., Muangpil, S., Kungwan, N., Meepowpan, P., Lee, V. S., & Punyodom, W. (2013) · Computational and Theoretical Chemistry · doi:10.1016/j.comptc.2013.07.045 · Cited by 15
Gorrasi, G., Vertuccio, L., Annunziata, L., Pellecchia, C., & Pappalardo, D. (2010) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2009.11.006 · Cited by 15
Jiang, Y., Zhang, W., Han, M., Wang, X., Solan, G. A., Wang, R., Ma, Y., & Sun, W. (2022) · Polymer · doi:10.1016/j.polymer.2022.124602 · Cited by 16
Ring‐opening polymerization of 1,4‐dioxan‐2‐one initiated by lanthanum isopropoxide in bulk
Zhu, X., Wu, G., Qiu, Z., Zhou, Y., Gong, J., Yang, K., & Wang, Y. (2008) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.22849 · Cited by 15
Continuous polymerization of ε‐caprolactone initiated by titanium phenoxide in a twin‐screw extruder
Machado, A. V., Bounor‐Legaré, V., Gonçalves, N., Mélis, F., Cassagnau, P., & Michel, A. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28850 · Cited by 15
Self-citationNi, X., Liang, Z., Ling, J., Li, X., & Shen, Z. (2011) · Polymer International · doi:10.1002/pi.3145 · Cited by 15
Zhao, Y., Becquart, F., Chalamet, Y., Chen, J., & Taha, M. (2009) · Macromolecular Materials and Engineering · doi:10.1002/mame.200900136 · Cited by 14
Mahalakshmi, S., Alagesan, T., Parthasarathy, V., Tung, K., & Anbarasan, R. (2018) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-018-7514-2 · Cited by 14
Facile synthesis of a d-galactono-1,6-lactone derivative, a precursor of a copolyester
Zaliz, C. L. R., & Varela, O. J. (2006) · Carbohydrate Research · doi:10.1016/j.carres.2006.10.017 · Cited by 14
Li, P., Zerroukhi, A., Chen, J., Chalamet, Y., Jeanmaire, T., & Xia, Z. (2008) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.23079 · Cited by 14
Gao, J., Zhang, W., Cao, F., Solan, G. A., Zhang, X., Jiang, Y., Hao, X., & Sun, W. (2020) · Molecular Catalysis · doi:10.1016/j.mcat.2020.111280 · Cited by 15
Białek, M., Fryga, J., Spaleniak, G. P., & Dziuk, B. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02419-y · Cited by 13
Yan, S., Lai, W., Zhang, M., & Wu, G. (2020) · Polymer · doi:10.1016/j.polymer.2020.122999 · Cited by 12
Biobased grafted polyesters prepared by in situ ring-opening polymerization
Moura, I., Nogueira, R., Bounor‐Legaré, V., & Machado, A. V. (2011) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2011.03.012 · Cited by 12
Self-citationChen, J., Wu, X., Zhang, L., Duan, Z., & Liu, B. (2022) · Polymer Chemistry · doi:10.1039/d2py00115b · Cited by 11
Piskun, Y. A., Vasilenko, I. V., Zaitsev, K. V., Oprunenko, Y. F., & Kostjuk, S. V. (2017) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201600580 · Cited by 11
Valente, A., Zinck, P., Mortreux, A., Visseaux, M., Mendes, P. J. G., Silva, T. J. L., & Garcia, M. H. (2011) · Journal of Molecular Catalysis A: Chemical · doi:10.1016/j.molcata.2011.06.015 · Cited by 9
Pappuru, S., Ramkumar, V., & Chakraborty, D. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5349 · Cited by 9
Zhou, J., & Ritter, H. (2008) · Macromolecules · doi:10.1021/ma701934r · Cited by 9
Shang, X., Zhang, W., & Lang, J. (2016) · RSC Advances · doi:10.1039/c5ra22279f · Cited by 9
Impact of aryloxy initiators on the living and immortal polymerization of lactide
Chile, L.-E., Ebrahimi, T., Wong, A., Aluthge, D. C., Hatzikiriakos, S. G., & Mehrkhodavandi, P. (2017) · Dalton Transactions · doi:10.1039/c7dt00990a · Cited by 9
Wang, X., Gao, W., Liao, B., & Fatehi, P. (2023) · ACS Omega · doi:10.1021/acsomega.3c02296 · Cited by 8
Xue, L., Wang, W., Zhao, D., Liu, H., & Zhu, Y. (2023) · Polymer Chemistry · doi:10.1039/d3py00871a · Cited by 9
Fan, J., Long, F., Aldred, M. P., Li, Y., Liang, Z., & Zhu, M. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201200073 · Cited by 8
Study of ε-caprolactone polymerization by NIR spectroscopy
Blanco, M., Sánchez‐Martín, M., & Alcalà, M. (2010) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-010-3890-6 · Cited by 8
Gao, J., Zhang, W., Wang, X., Wang, R., Han, M., Cao, F., & Hao, X. (2023) · Catalysts · doi:10.3390/catal13040770 · Cited by 7
Alves, A. C., Silva, A. M., Nunes, C., Cravo, S. M. M., Reis, S., Pinto, M. M. M., Sousa, E., Rodrigues, F., Ferreira, D., Costa, P. C., et al. (2024) · Life · doi:10.3390/life14010132 · Cited by 7
Li, F. H., Li, S., Jiang, T., & Sun, Y. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.183-185.155 · Cited by 7
Li, X., Jeanmaire, T., & Zerroukhi, A. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.27472 · Cited by 7
Preparation of unsaturated poly(ε‐caprolactone) with a new titanium alkoxide initiator
Xia, Z., Zerroukhi, A., Chalamet, Y., & Chen, J. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28063 · Cited by 7
Silawanich, A., Muangpil, S., Kungwan, N., Meepowpan, P., Punyodom, W., & Lawan, N. (2016) · Computational and Theoretical Chemistry · doi:10.1016/j.comptc.2016.05.017 · Cited by 8
Cayuela, J., Boisson, F., Michel, A., Cassagnau, P., & Bounor‐Legaré, V. (2016) · Polymer · doi:10.1016/j.polymer.2016.09.078 · Cited by 6
Self-citationChabert, M., Bounor‐Legaré, V., Mignard, N., Cassagnau, P., Chamignon, C., & Boisson, F. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.030 · Cited by 5
Self-citationNanaki, S. G., Chrissafis, K., & Bikiaris, D. Ν. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.01.032 · Cited by 5
Barlier, V. S., Léonard, D., Boiteux, G., Davenas, J., Boisson, F., & Bounor‐Legaré, V. (2009) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2008.12.007 · Cited by 5
Self-citationAltmann, H. J., Machat, M. R., Wolf, A., Gürtler, C. F., Wang, D., & Buchmeiser, M. R. (2021) · Journal of Polymer Science · doi:10.1002/pol.20200780 · Cited by 5
Weng, S., Xia, Z., Chen, J., Gong, L., & Xu, R. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35366 · Cited by 3
Metadata
- Authors
- Cayuela, J., Bounor-Legaré, V., Cassagnau, P., & Michel, A.
- Affiliations
- Lyon 1 Université (FR)
- Laboratoire des Matériaux Polymères et des Biomatériaux, UMR−CNRS 5627: Ingénierie des Matériaux Polymères, ISTIL, Université Claude Bernard, Lyon 1, 15 Boulevard Latarjet 69622 Villeurbanne Cedex, France
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-01-28
- Volume
- 39
- Issue
- 4
- Pages
- 1338-1346
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2058242635
- Cited by
- 110
- References
- 17
- Citations by year
- 2026: 2 · 2024: 3 · 2023: 4 · 2022: 2 · 2021: 5 · 2020: 3 · 2019: 5 · 2018: 1 · 2017: 4 · 2016: 6 · 2015: 7 · 2014: 4 · 2013: 5 · 2012: 7
- FWCI
- 6.03
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Carbon dioxide utilization in catalysis
- Keywords
- ε-caprolactone, ring-opening polymerization, coordination-insertion mechanism, bulk polymerization, molecular weight distribution, polydispersity, transesterification, end-group analysis, rheology
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.