Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 189

The DOI matches its Crossref record.

Scaling Laws in Electrospinning of Polystyrene Solutions

Wang, Chi, Hsu, Chia-Hung, Lin, Jian-Hua · 2006 · Macromolecules

Abstract

By tuning the processing variables and solution properties using four different solvents (dimethylformamide, o -dichlorobeneze, tetrahydrofuran, and chloroform), polystyrene (PS) fibers were prepared by the electrospinning process to study the effects of these governing parameters on the morphological changes of the charged cone and jet, as well as the diameter and birefringence of the fibers collected. Both jet diameter ( d j ) and fiber diameter ( d f ) were scaled with the processing variables, i.e., solution flow-rate ( Q ), applied voltage ( V ) and working distance ( H ), with a power law model. Knowledge of these exponents provided insight into how to manipulate the electrified jet and spun fibers for a given solution. Results showed that Q was the dominant factor in determining the fiber diameter and the Q dependences of d j and d f were approximately scaled with: d j ∼ Q 0.5 and d f ∼ Q 0.25 . The applied electric field ( V / H ) did affect the cone volume and the length of the electrified jet. Either increasing V or decreasing H produced a slightly thinner jet and smaller fiber, but the effects were not significant due to the limited processing range available for the stable cone-jet mode, and the nonuniformity of the electric field resulting from the point-to-plate electrode configuration used in this study. Regardless of the variations of the processing variables ( Q, V, and H ), a master curve between d j and d f was found for a solution with fixed properties, from which a simple equation was obtained and expressed by: d f ∼ md j 0.45 where m was a prefactor depending upon solution properties, such as the viscosity (η ο ), conductivity (κ) and surface tension. Values of m were found to be lower for solutions with lower viscosity and/or higher conductivity, and were successfully scaled to be as follows: m ∼ η o 0.38 κ -0.12 . As far as the solution properties were concerned, the concentration emerged as the most important parameter because of its interaction with all aspects of the electrospinning process. The rheological properties of the polymer solution showed a significant effect on the formation of smooth electrospun fibers. On the basis of the Graessley's concentration-molecular weight diagram, various PS fiber morphologies were discussed and the minimum polymer concentration at a given polymer molecular weight required for preparing smooth PS fibers could be estimated. For the present PS solutions, a scaling law was found between the fiber diameter and solution viscosity: d f ∼ η o 0.41, if other governing parameters ( Q, V, H, κ, and surface tension) were fixed.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ma060866a

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 189

Metadata

Authors
Wang, C., Hsu, C.-H., & Lin, J.-H.
Venue
Macromolecules
Published
2006-10-01
Volume
39
Issue
22
Pages
7662-7672
ISSN
  • 0024-9297 (ISSN-L)
  • 1520-5835
OpenAlex
W2133104427
Cited by
189
References
0
FWCI
4.89
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Scaling Laws in Electrospinning of Polystyrene Solutions. https://app.cochat.ai/papers/10.1021/ma060866a
The paper
Wang, C., Hsu, C.-H., & Lin, J.-H. (2006). Scaling Laws in Electrospinning of Polystyrene Solutions. Macromolecules. https://doi.org/10.1021/ma060866a

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.