The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Mechanism of Degradation of Starch, a Highly Branched Polymer, during Extrusion
Abstract
An investigation of the mechanisms of degradation of a branched polymer in extrusion was performed using starch as substrate. Starch has the advantage that the distribution of degree of polymerization of individual branches can be readily obtained using a debranching enzyme and also that it does not undergo any reaction except scission during extrusion, thereby aiding mechanistic interpretation. Various starches, containing a range of the highly branched amylopectin component and the much less branched amylose component, were extruded in the presence of water and glycerol as plasticizers with extruder barrel temperatures ranging from 50 °C at the hopper zone through to 140 °C near the die exit. Analysis by size-exclusion chromatography of both whole and debranched samples subject to various levels of extrusion showed that the extrusion degradation process involved preferential cleaving of larger molecules, while causing the size distribution to narrow and converge toward a maximum stable size. This is analogous to a similar effect of shear degradation of droplets in emulsions. It was also found that the susceptibility of polymer molecules to shear degradation is not only dependent on the size of the molecule but also extensively influenced by the branching structure. High branching density and short branch length were associated with higher susceptibility to shear degradation. This is explained by the hypothesis that a short-chain hyperbranched polymer has a relatively inflexible structure, leading to a higher susceptibility to shear scission. The degradation process is not significantly selective toward the length of individual branches when the polymer is in a molten state but it preferentially breaks longer branches when the starch polymer is in a semicrystalline granular form. These inferences are generally applicable and use the additional information from the branch length distribution and absence of side reactions, which is generally not available for synthetic polymers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Starch granules: structure and biosynthesis
Buléon, A., Colonna, P., Planchot, V., & Ball, S. (1998) · International Journal of Biological Macromolecules · doi:10.1016/s0141-8130(98)00040-3 · Cited by 2,091
Biodegradable Polymers for the Environment
Gross, R. A., & Kalra, B. (2002) · Science · doi:10.1126/science.297.5582.803 · Cited by 1,981
A universal calibration for gel permeation chromatography
Grubisic, Z., Rempp, P., & Benoit, H. (1967) · Journal of Polymer Science Part B: Polymer Letters · doi:10.1002/pol.1967.110050903 · Cited by 1,413
Biodegradable starch/clay nanocomposite films for food packaging applications
Avella, M., De Vlieger, J. J., Errico, M. E., Fischer, S., Vacca, P., & Volpe, M. G. (2005) · Food Chemistry · doi:10.1016/j.foodchem.2004.10.024 · Cited by 936
Berry, C. S. (1986) · Journal of Cereal Science · doi:10.1016/s0733-5210(86)80034-0 · Cited by 474
Cave, R. A., Seabrook, S. A., Gidley, M. J., & Gilbert, R. G. (2009) · Biomacromolecules · doi:10.1021/bm900426n · Cited by 395
Self-citationUltrasonic degradation of polymers in solution
Basedow, A. M., & Ebert, K. H. (1977) · Advances in polymer science · doi:10.1007/3-540-07942-4_6 · Cited by 328
Gelatinization of cornstarch with different amylose/amylopectin content
Liu, H., Yu, L., Xie, F., & Chen, L. (2006) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.01.026 · Cited by 328
Degradation of polyolefins during melt processing
Hinsken, H., Moss, S., Pauquet, J.-R., & Zweifel, H. (1991) · Polymer Degradation and Stability · doi:10.1016/0141-3910(91)90123-9 · Cited by 325
O’Shea, M. G., Samuel, M. S., Konik, C. M., & Morell, M. K. (1998) · Carbohydrate Research · doi:10.1016/s0008-6215(97)10085-4 · Cited by 272
Clay, P. A., & Gilbert, R. G. (1995) · Macromolecules · doi:10.1021/ma00106a021 · Cited by 211
Self-citationCompendium of Polymer Terminology and Nomenclature: IUPAC Recommendations 2008
(2009) · Royal Society of Chemistry eBooks · doi:10.1039/9781847559425 · Cited by 196
Pinheiro, L. A., Chinelatto, M. A., & Canevarolo, S. V. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.05.016 · Cited by 192
Droplet breakup mechanisms: Stepwise equilibrium versus transient dispersion
Janssen, J. M. H., & Meijer, H. E. H. (1993) · Journal of Rheology · doi:10.1122/1.550385 · Cited by 190
Molecular order and structure in enzyme-resistant retrograded starch
Gidley, M. J., Cooke, D., Darke, A. H., Hoffmann, R. A., Russell, A. L., & Greenwell, P. (1995) · Carbohydrate Polymers · doi:10.1016/0144-8617(96)81387-7 · Cited by 176
Guha, M., Ali, S. Z., & Bhattacharya, S. (1997) · Journal of Food Engineering · doi:10.1016/s0260-8774(97)00028-9 · Cited by 161
Drop breakup and fragment size distribution in shear flow
Vittorio Cristini, C., Guido, S., Alfani, A., Bławzdziewicz, J., & Loewenberg, M. (2003) · Journal of Rheology · doi:10.1122/1.1603240 · Cited by 147
Influence of amylose content on the viscous behavior of low hydrated molten starches
Valle, G. D., Colonna, P., Patria, A., & Vergnes, B. (1996) · Journal of Rheology · doi:10.1122/1.550747 · Cited by 136
Hizukuri, S., & Takagi, T. (1984) · Carbohydrate Research · doi:10.1016/0008-6215(84)85017-x · Cited by 132
Differential Molecular Weight Distributions in High Performance Size Exclusion Chromatography
Shortt, D. W. (1993) · Journal of Liquid Chromatography · doi:10.1080/10826079308019695 · Cited by 129
Assessment of the Extent of Starch Dissolution in Dimethyl Sulfoxide by 1 H NMR Spectroscopy
Schmitz, S. M., Dona, A. C., Castignolles, P., Gilbert, R. G., & Gaborieau, M. (2008) · Macromolecular Bioscience · doi:10.1002/mabi.200800244 · Cited by 111
Self-citationUnderstanding Molecular Weight Reduction of Starch During Heating‐shearing Processes
van den Einde, R. M., van der Goot, A. J., & Boom, R. M. (2003) · Journal of Food Science · doi:10.1111/j.1365-2621.2003.tb07036.x · Cited by 98
Degradation of Wheat Starch in a Single‐Screw Extruder: Mechano‐Kinetic Breakdown of Cooked Starch
Diosady, L. L., Paton, D., ROSEN, N., RUBIN, L. J., & ATHANASSOULIAS, C. (1985) · Journal of Food Science · doi:10.1111/j.1365-2621.1985.tb10568.x · Cited by 96
Liu, H., Yu, L., Simon, G. P., Zhang, X., Dean, K., & Chen, L. (2008) · Carbohydrate Research · doi:10.1016/j.carres.2008.11.014 · Cited by 41
Kealy, T. J. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29418 · Cited by 41
Combined rheological and optical investigation of maize, barley and wheat starch gelatinisation
Tan, I., Torley, P. J., & Halley, P. J. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.08.018 · Cited by 35
Self-citationScaffaro, R., Mantia, F. P. L., Botta, L., Morreale, M., Dintcheva, N. T., & Mariani, P. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21317 · Cited by 24
A study of thermal oxidative and thermal mechanical degradation of polypropylene
Ying, Q., Zhao, Y. S., & Liu, Y. (1991) · Die Makromolekulare Chemie · doi:10.1002/macp.1991.021920503 · Cited by 20
Thermal and mechanical modification of LDPE in single‐screw extruder
Ono, K., & Yamaguchi, M. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29980 · Cited by 17
Cited by
Mechanical Recycling of Packaging Plastics: A Review
Schyns, Z. O. G., & Shaver, M. P. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202000415 · Cited by 1,643
Gandini, A. (2011) · Green Chemistry · doi:10.1039/c0gc00789g · Cited by 695
From monomers to polymers from renewable resources: Recent advances
Gandini, A., & Lacerda, T. M. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.11.002 · Cited by 620
Li, H., Prakash, S., Nicholson, T. M., Fitzgerald, M. A., & Gilbert, R. G. (2016) · Food Chemistry · doi:10.1016/j.foodchem.2015.09.112 · Cited by 525
Self-citationSyahariza, Z. A., Sar, S., Hasjim, J., Tizzotti, M. J., & Gilbert, R. G. (2013) · Food Chemistry · doi:10.1016/j.foodchem.2012.08.053 · Cited by 371
Self-citation
Metadata
- Authors
- Liu, W.-C., Halley, P. J., & Gilbert, R. G.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-02-24
- Volume
- 43
- Issue
- 6
- Pages
- 2855-2864
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1987023664
- Cited by
- 294
- References
- 29
- FWCI
- 9.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.