The DOI matches its Crossref record.
Droplet breakup mechanisms: Stepwise equilibrium versus transient dispersion
Open accessAbstract
In dispersive mixing of immiscible liquids the minimum attainable dropsize is often deduced from the critical value of the Capillary number (the ratio of the shear stress to the interfacial stress) necessary for drop breakup under quasiequilibrium conditions. The critical Capillary number shows a minimum if the viscosity ratio between dispersed and continuous phase is about one. Hence, it is commonly accepted that the finest morphology is obtained if both viscosities match. In practical mixing devices, however, small drops are formed by a transient mechanism of thread breakup during extension rather than by stepwise breakup under equilibrium conditions. For Newtonian liquids, a comparison is made between the dropsizes resulting from a stepwise equilibrium and a transient breakup mechanism. Generally, the transient mechanism yields smaller drops and, more interestingly, a higher viscosity ratio between the dispersed and continuous phases results in a finer morphology, as already indicated by Tjahjadi and Ottino (1991). In the present paper the comparison is elaborated over a broad range of the relevant parameters while a compact illustrative presentation of the results is given to stress the possible consequences for practical blend morphologies.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Strategies for compatibilization of polymer blends
Koning, C. (1998) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00054-3 · Cited by 881
Static Mixers in the Process Industries—A Review
Thakur, R. K., Vial, C., Nigam, K. D. P., Nauman, E. B., & Djelveh, G. (2003) · Chemical Engineering Research and Design · doi:10.1205/026387603322302968 · Cited by 597
M ICROSTRUCTURAL E VOLUTION IN P OLYMER B LENDS
Tucker III, C. L., & Moldenaers, P. (2002) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.34.082301.144051 · Cited by 415
Mechanism of Degradation of Starch, a Highly Branched Polymer, during Extrusion
Liu, W.-C., Halley, P. J., & Gilbert, R. G. (2010) · Macromolecules · doi:10.1021/ma100067x · Cited by 294
High-performance flow-focusing geometry for spontaneous generation of monodispersed droplets
Yobas, L., Martens, S., Ong, W.-L., & Ranganathan, N. (2006) · Lab on a Chip · doi:10.1039/b602240e · Cited by 293
Metadata
- Authors
- Janssen, J. M. H., & Meijer, H. E. H.
- Venue
- Journal of Rheology
- Publisher
- Society of Rheology
- Published
- 1993-07
- Volume
- 37
- Issue
- 4
- Pages
- 597-608
- ISSN
- 0097-0360 (ISSN-L)
- 0148-6055
- 1520-8516
- OpenAlex
- W2170364261
- Cited by
- 190
- References
- 0
- FWCI
- 4.65
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Droplet breakup mechanisms: Stepwise equilibrium versus transient dispersion. https://app.cochat.ai/papers/10.1122/1.550385
- The paper
- Janssen, J. M. H., & Meijer, H. E. H. (1993). Droplet breakup mechanisms: Stepwise equilibrium versus transient dispersion. Journal of Rheology. https://doi.org/10.1122/1.550385
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.