The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Impact of Filler Surface Modification on Large Scale Mechanics of Styrene Butadiene/Silica Rubber Composites
Abstract
In material science of elastomers the influence of nanoscale and nanostructured filler particles is of utmost significance for the performance of innovative rubber products, i.e., passenger car tires with ultralow rolling resistance but high wet-grip performance. A better understanding of the physical characteristics of the filler–rubber interface and the filler–rubber interphase as well is necessary to improve the overall macroscopic properties of these elastomeric nanocomposites. Therefore, the surface energies and polarities of filler particles with different modified surfaces were measured by a modified Wilhelmy technique. In all cases the rubber matrix consisted of a solution - styrene butadiene copolymers, filled with 20 or 40 phr pyrogenic or precipitated silica grades with different surface modifications by silanes, and a carbon black sample as reference. A moving die rheometer was employed to observe the filler flocculation at elevated temperatures (160 °C) in rubber mixtures containing no curatives. A significant influence of the surface energy of the filler was noticed: the flocculation tendency increased with increasing difference in work of adhesion between filler and rubber. In dynamic mechanical measurements the influence of the filler/filler and the filler/polymer interactions were studied in cured S-SBR samples. Amplitude sweep experiments were carried out to investigate the temperature dependent nonlinear characteristics of the elastic and viscous moduli, which is commonly associated with a progressive breakdown of the filler network at higher strain amplitudes (Payne effect). Static measurements and relaxations test were accomplished by large scale strain experiments. A structural–phenomenological modeling of the long strain mechanical properties of these rubber compounds was done: the “layered fiber model”. This new model is based on the hypothesis that during deformation of the composites the polymer chains slipped off from the polymer interphase around the filler particles into the gaps between aggregates, where high-strength polymer fibers in an uniaxially oriented state are formed. We find new interesting correlations between the physicochemical properties of the filler/polymer interface and the macroscopic mechanical properties of the elastomeric materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rubinstein, M., & Colby, R. H. (2003) · doi:10.1093/oso/9780198520597.001.0001 · Cited by 5,686
The dynamic properties of carbon black-loaded natural rubber vulcanizates. Part I
Payne, A. R. (1962) · Journal of Applied Polymer Science · doi:10.1002/app.1962.070061906 · Cited by 1,098
Effect of Polymer-Filler and Filler-Filler Interactions on Dynamic Properties of Filled Vulcanizates
Wang, M.-J. (1998) · Rubber Chemistry and Technology · doi:10.5254/1.3538492 · Cited by 1,033
Fowkes, F. M. (1963) · The Journal of Physical Chemistry · doi:10.1021/j100806a008 · Cited by 747
Heinrich, G., Klüppel, M., & Vilgis, T. A. (2002) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(02)00030-x · Cited by 669
Self-citationReinforcement Mechanism of Nanofilled Polymer Melts As Elucidated by Nonlinear Viscoelastic Behavior
Sternstein, S. S., & Zhu, A.-J. (2002) · Macromolecules · doi:10.1021/ma020482u · Cited by 539
Recent Advances in the Theory of Filler Networking in Elastomers
Heinrich, G., & Klüppel, M. (2007) · Advances in Polymer Science · doi:10.1007/3-540-45362-8_1 · Cited by 537
Self-citationEvidence for the Shift of the Glass Transition near the Particles in Silica-Filled Elastomers
Berriot, J., Montes, H., Lequeux, F., Long, D., & Sotta, P. (2002) · Macromolecules · doi:10.1021/ma0212700 · Cited by 438
Poly(ethylene oxide)/Silica Nanocomposites: Structure and Rheology
Zhang, Q., & Archer, L. A. (2002) · Langmuir · doi:10.1021/la026338j · Cited by 429
Long, D., & Lequeux, F. (2001) · The European Physical Journal E · doi:10.1007/s101890170120 · Cited by 348
The Role of Disorder in Filler Reinforcement of Elastomers on Various Length Scales
Klüppel, M. (2003) · Advances in Polymer Science · doi:10.1007/b11054 · Cited by 340
EPDM−Carbon Black Interactions and the Reinforcement Mechanisms, As Studied by Low-Resolution1H NMR
Litvinov, V. M., & Steeman, P. A. M. (1999) · Macromolecules · doi:10.1021/ma9910080 · Cited by 275
Zhu, Z., Thompson, T., Wang, S.-Q., von Meerwall, E. D., & Halasa, A. (2005) · Macromolecules · doi:10.1021/ma050922s · Cited by 246
Montes, H., Lequeux, F., & Berriot, J. (2003) · Macromolecules · doi:10.1021/ma0344590 · Cited by 189
Gradient of glass transition temperature in filled elastomers
Berriot, J., Montes, H., Lequeux, F., Long, D., & Sotta, P. (2003) · Europhysics Letters (EPL) · doi:10.1209/epl/i2003-00124-7 · Cited by 184
Filler–elastomer interaction in model filled rubbers, a 1H NMR study
Berriot, J., Lequeux, F., Monnerie, L., Montes, H., Long, D., & Sotta, P. (2002) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(02)01552-1 · Cited by 180
Stöckelhuber, K. W., Das, A., Jurk, R., & Heinrich, G. (2010) · Polymer · doi:10.1016/j.polymer.2010.03.013 · Cited by 179
Self-citationBöhm, G. G. A., & Nguyen, M. N. (1995) · Journal of Applied Polymer Science · doi:10.1002/app.1995.070550707 · Cited by 131
Universal Properties in Filler-Loaded Rubbers
Kilian, H. G., Strauss, M. J., & Hamm, W. C. (1994) · Rubber Chemistry and Technology · doi:10.5254/1.3538664 · Cited by 71
Meier, J. G., Fritzsche, J., Guy, L., Bomal, Y., & Klüppel, M. (2009) · Macromolecules · doi:10.1021/ma802002s · Cited by 35
Jamming in Filled Polymer Systems
Richter, S., Saphiannikova, M., Stöckelhuber, K. W., & Heinrich, G. (2010) · Macromolecular Symposia · doi:10.1002/masy.201050523 · Cited by 31
Self-citationDifferential constitutive equations of incompressible media with finite deformations
Svistkov, A. L., & Lauke, B. (2009) · Journal of Applied Mechanics and Technical Physics · doi:10.1007/s10808-009-0066-2 · Cited by 11
Self-citation
Metadata
- Authors
- Stöckelhuber, K. W., Svistkov, A. S., Pelevin, A. G., & Heinrich, G.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-05-10
- Volume
- 44
- Issue
- 11
- Pages
- 4366-4381
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1980142291
- Cited by
- 365
- References
- 22
- FWCI
- 31.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.