Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 683

The DOI matches its Crossref record.

Novel Ferroelectric Polymers for High Energy Density and Low Loss Dielectrics

Zhu, Lei, Wang, Qing·2012·Macromolecules

Abstract

The state-of-the-art polymer dielectrics have been limited to nonpolar polymers with relatively low energy density but ultralow dielectric losses for the past decades. With the fast development of power electronics in pulsed power and power conditioning applications, there is a need for next-generation dielectric capacitors in areas of high energy density/low loss and/or high temperature/low loss polymer dielectrics. Given limitations in further enhancing atomic and electronic polarizations for polymers, this Perspective focuses on a fundamental question: Can orientational polarization in polar polymers be utilized for high energy density and low loss dielectrics? Existing experimental and theoretical results have suggested the following perspectives. For amorphous polar polymers, high energy density and low loss can be achieved below their glass transition temperatures. For liquid crystalline side-chain polymers, dipole mobility is so high that they saturate at relatively low electric fields, and only limited electrical energy can be further stored after dipole saturation. Crystalline polar polymers are promising and can be divided into three categories: normal ferroelectric, paraelectric, and novel ferroelectric. For normal ferroelectric crystalline polymers, switching of a high spontaneous polarization results in a large hysteresis. To reduce the hysteresis, ultrafine crystallites or ferroelectric domains are desired to reduce the spontaneous polarization. For paraelectric crystalline polymers, dipoles have the potential to align in an external electric field. However, a high degree of dipole reversibility is required for the high energy density and low loss application. Novel ferroelectric behaviors include relaxor ferroelectric and antiferroelectric-like behaviors are highly desired because of their high degree of dipole reversibility. To achieve the relaxor ferroelectric behavior, structural defects such as bulky comonomers need to be introduced into the crystalline lattice to expand the lateral unit cell dimensions and speed up the mobility and reversibility of crystalline dipoles. So far, true antiferroelectric crystalline polymers have not yet been discovered. Nevertheless, the antiferroelectric-like behavior has been realized by reducing the compensation polarization via nanoconfinement. In the future, more research is needed to develop new paraelectric and novel ferroelectric polymers for high energy density and low loss dielectrics.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/ma2024057

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

Metadata

Authors
Zhu, L., & Wang, Q.
Venue
Macromolecules
Published
2012-02-10
Volume
45
Issue
7
Pages
2937-2954
ISSN
  • 0024-9297 (ISSN-L)
  • 1520-5835
OpenAlex
W2315217031
Cited by
683
References
0
FWCI
17.44
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.