The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
On the Measurements of Rigidity Modulus of Soft Materials in Nanoindentation Experiments at Small Depth
Abstract
It is of interest to measure the modulus of rigidity at small indentation depths for many systems, such as thin films, nanocomposites, biomaterials, etc. Depth-dependence of the rigidity modulus of homogeneous soft materials is broadly observed in nanoindentation experiments. Typically, the modulus reaches its bulk value only when the indentation depth becomes relatively large. Nature of this effect (we suggest to call this “skin-effect” for short) is not well understood. It is not even clear if this is a real effect or an artifact. Here we present the results of precise indentation measurements based on the use of atomic force microscopy (AFM), which suggest that the skin-effect may be an artifact. It can be eliminated, and the bulk modulus can be measured at nanometer indentations if one (a) takes into account adhesion between the indenter and surface of interest, and (b) operates mostly within the linear stress–strain regime. To demonstrate it, we used three AFM probes of well-defined geometry (radii of the apex were 22, 810, and 1030 nm) to study the indentation of three different polymers of the bulk rigidity of 0.6–0.7 GPa (polyurethanes) and 2.8 GPa (polystyrene). The obtained force–indentation curves were processed through the Oliver–Pharr, Hertz, Johnson–Kendall–Roberts (JKR) and Derjaguin–Muller–Toporov (DMT) models. We found that the skin-effect disappeared when using dull (810 and 1030 nm) probes and processing the force-deformation data with either of the adhesion models (JKR or DMT). Moreover, the measured moduli were independent of the indentation depth. The values of the rigidity modulus were very close to the bulk values starting from the indentations of 2–3 nm. Such a small indentation seems to be the smallest one for soft materials at which the bulk modulus has been reached. When using the sharp (22 nm) probe, we were not able to reach the bulk moduli up to the maximum possible indentation allowed by the instrument 90 nm. The other sources of possible error in the modulus measurements are discussed. We conclude that the skin-effect originates mainly at both nonlinearity of stress–strain relation (occurs when using excessively sharp probes) and if the probe–surface adhesion is not taken into account (like in Oliver–Pharr and Hertz models).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biomechanics and biophysics of cancer cells☆
SURESH, S. (2007) · Acta Biomaterialia · doi:10.1016/j.actbio.2007.04.002 · Cited by 1,284
Cited by
A comparison of methods to assess cell mechanical properties
Wu, P.-H., Aroush, D. R.-B., Asnacios, A., Chen, W.-C., Dokukin, M. E., Doss, B. L., Durand-Smet, P., Ekpenyong, A., Guck, J., Guz, N. V., et al. (2018) · Nature Methods · doi:10.1038/s41592-018-0015-1 · Cited by 672
Self-citationGarcia, R. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00318b · Cited by 480
Dokukin, M. E., & Sokolov, I. (2012) · Langmuir · doi:10.1021/la302706b · Cited by 385
Self-citationUniversal shape and pressure inside bubbles appearing in van der Waals heterostructures
Khestanova, E., Guinea, F., Fumagalli, L., Geim, A. K., & Grigorieva, I. V. (2016) · Nature Communications · doi:10.1038/ncomms12587 · Cited by 358
Guz, N., Dokukin, M., Kalaparthi, V., & Sokolov, I. (2014) · Biophysical Journal · doi:10.1016/j.bpj.2014.06.033 · Cited by 315
Self-citationIn Situ and Quantitative Characterization of Solid Electrolyte Interphases
Cresce, A. V., Russell, S. M., Baker, D. R., Gaskell, K. J., & Xu, K. (2014) · Nano Letters · doi:10.1021/nl404471v · Cited by 286
Metadata
- Authors
- Dokukin, M. E., & Sokolov, I.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-05-11
- Volume
- 45
- Issue
- 10
- Pages
- 4277-4288
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2327138964
- Cited by
- 162
- References
- 1
- FWCI
- 14.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.