Unusual Thermal Properties of Polylactides and Polylactide Stereocomplexes Containing Polylactide-Functionalized Multi-Walled Carbon Nanotubes
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
A novel and simple method for the preparation of linear, high-molar-mass, thermally stable polylactide stereocomplexes (sc-PLA) with multiwalled carbon nanotubes (MWCNTs) covalently attached to enantiomeric PLA chains is presented. The MWCNTs modified with organic spacers terminated with −OH groups were used as initiators for the ring-opening polymerization (ROP) of enantiomeric l - and d -lactides. The weight percentage of MWCNTs in the final stereocomplexes was approximately 1 wt %. The nascent (as-polymerized) polymer samples obtained by the ROP in bulk at 130 °C exhibited unusually high melting temperatures (≥190 °C) as well as enthalpies of fusion close to that estimated for polylactides with 100% crystallinity. PLA stereocomplexes were prepared from equimolar mixtures of l -PLA and d -PLA that also contained MWCNT- g -PLA, either by precipitation from solution or, for the first time, as a thin film via the slow evaporation of solvent. Crystallization in the form of stereocomplexes after melting was, unusually, completely reversible, without formation of any homochiral crystallites. Shish-kebab morphologies for the thin-film stereocomplexes containing 1 wt % of MWCNT- g -PLA were observed by atomic force microscopy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Barbey, R., Lavanant, L., Paripovic, D., Schüwer, N., Sugnaux, C., Tugulu, S., & Klok, H.-A. (2009) · Chemical Reviews · doi:10.1021/cr900045a · Cited by 1,753
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Ovitt, T. M., & Coates, G. W. (2002) · Journal of the American Chemical Society · doi:10.1021/ja012052+ · Cited by 713
Mechanism of the Stereocomplex Formation between Enantiomeric Poly(lactide)s
Brizzolara, D., Cantow, H.-J., Diederichs, K., Keller, E., & Domb, A. J. (1996) · Macromolecules · doi:10.1021/ma951144e · Cited by 547
Tsuji, H., & Ikada, Y. (1999) · Polymer · doi:10.1016/s0032-3861(99)00004-x · Cited by 545
Tsuji, H., Hyon, S. H., & Ikada, Y. (1991) · Macromolecules · doi:10.1021/ma00020a026 · Cited by 334
SAHOO, N., JUNG, Y., YOO, H., & CHO, J. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.10.013 · Cited by 216
de Jong, S. J., van Dijk-Wolthuis, W. N. E., Kettenes-van den Bosch, J. J., Schuyl, P. J. W., & Hennink, W. E. (1998) · Macromolecules · doi:10.1021/ma980553i · Cited by 172
Cited by
Recent advances in stereocomplexation of enantiomeric PLA-based copolymers and applications
Li, Z., Tan, B. H., Lin, T., & He, C. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.05.003 · Cited by 285
Interfacial characteristics of carbon nanotube-polymer composites: A review
Chen, J., Yan, L., Song, W., & Xu, D. (2018) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.08.021 · Cited by 192
Star-shaped and branched polylactides: Synthesis, characterization, and properties
Michalski, A., Brzezinski, M., Lapienis, G., & Biela, T. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.10.004 · Cited by 158
Self-citationRemarkable melting behavior of PLA stereocomplex in linear PLLA/PDLA blends
Shao, J., Xiang, S., Bian, X., Sun, J., Li, G., & Chen, X. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie504484b · Cited by 113
Poly(lactic acid) stereocomplexes based molecular architectures: Synthesis and crystallization
Michell, R. M., Ladelta, V., Da Silva, E., Müller, A. J., & Hadjichristidis, N. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101742 · Cited by 77
Metadata
- Authors
- Brzeziński, M., Bogusławska, M., Ilčíková, M., Mosnáček, J., & Biela, T.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-10-18
- Volume
- 45
- Issue
- 21
- Pages
- 8714-8721
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2320566042
- Cited by
- 105
- References
- 9
- FWCI
- 3.73
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.