The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Microporous Polyimides with Uniform Pores for Adsorption and Separation of CO2Gas and Organic Vapors
Abstract
Three microporous polyimides, MPI-1, MPI-2, and MPI-3, with uniform pores were synthesized via one-pot polycondensation from tetrakis(4-aminophenyl)methane, tris(4-aminophenyl)amine and 1,3,5-tris(4-aminophenyl)benzene with pyromellitic dianhydride, respectively. The amorphous networks exhibit excellent thermal stability, large BET surface areas up to 1454 m 2 g –1, and narrow pore size distribution in the range from 5 to 6 Å. Their adsorption–desorption isotherms of CO 2 are reversible, and the CO 2 uptakes at 273 K and 1 bar are up to 16.8 wt %. Moreover, based on the ratios of initial slopes of isotherms, the CO 2 /N 2 and CO 2 /CH 4 separation factors are as high as 102 and 12, respectively. The above CO 2 adsorption and separation properties are attributed to the presence of abundant electron-rich heteroatoms in the polyimide networks and the unifrom ultralmicroporous structures. In addition, for MPI-1, the adsorption capacity of benzene vapor is 119.8 wt %, while the separation factors of benzene over nitrogen and water reach 342 and 28, respectively. The outstanding selective adsorptions of CO 2 gas and benzene vapor endow the microporous polyimides with promising potential in CO 2 capture and separation as well as air- and water-cleaning applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An overview of CO2 capture technologies
MacDowell, N., Florin, N., Buchard, A., Hallett, J., Galindo, A., Jackson, G., Adjiman, C. S., Williams, C. K., Shah, N., & Fennell, P. (2010) · Energy & Environmental Science · doi:10.1039/c004106h · Cited by 1,636
An Amine-Functionalized MIL-53 Metal−Organic Framework with Large Separation Power for CO 2 and CH 4
Couck, S., Denayer, J. F. M., Baron, G. V., Rémy, T., Gascon, J., & Kapteijn, F. (2009) · Journal of the American Chemical Society · doi:10.1021/ja900555r · Cited by 988
Carbon Dioxide and Nitrogen Adsorption on Cation-Exchanged SSZ-13 Zeolites
Pham, T. D., Liu, Q., & Lobo, R. F. (2013) · Langmuir · doi:10.1021/la304138z · Cited by 186
Cited by
Designed synthesis of large-pore crystalline polyimide covalent organic frameworks
Fang, Q., Zhuang, Z., Gu, S., Kaspar, R. B., Zheng, J., Wang, J., Qiu, S., & Yan, Y. (2014) · Nature Communications · doi:10.1038/ncomms5503 · Cited by 753
Zhao, Y., Yao, K. X., Teng, B., Zhang, T., & Han, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee42548g · Cited by 525
Arab, P., Rabbani, M. G., Sekizkardes, A. K., İslamoğlu, T., & El-Kaderi, H. M. (2014) · Chemistry of Materials · doi:10.1021/cm403161e · Cited by 300
Modeling Amorphous Microporous Polymers for CO2Capture and Separations
Kupgan, G., Abbott, L. J., Hart, K. E., & Colina, C. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00691 · Cited by 272
Metadata
- Authors
- Li, G., & Wang, Z.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-04-01
- Volume
- 46
- Issue
- 8
- Pages
- 3058-3066
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2327837350
- Cited by
- 193
- References
- 3
- FWCI
- 30.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.