The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Bandgap and Molecular Energy Level Control of Conjugated Polymer Photovoltaic Materials Based on Benzo[1,2-b:4,5-b′]dithiophene
Abstract
Bandgap and molecular energy level control are of great importance in improving photovoltaic properties of conjugated polymers. A common approach to tuning these parameters is to modify the structure of conjugated polymers by copolymerizing with different units. In this paper, research work focuses on the synthesis of benzo[1,2- b:4,5- b ′]dithiophene (BDT) with different conjugated units and their photovoltaic performance. Eight new BDT-based polymers with commonly used conjugated units, including thiophene, benzo[ c ][1,2,5]thiadiazole (BT), thieno[3,4- b ]pyrazine (TPZ), etc., were synthesized. The bandgaps of the polymers were tuned in the range of 1.0−2.0 eV, and their HOMO and LUMO energy levels could also be tuned effectively. The absorption spectra as well as electrochemical and photovoltaic properties of these polymers were investigated systematically. Some units exhibiting the same effect of bandgap lowering exhibited different effects on molecular energy levels of the polymers. For example, the TPZ unit can reduce the bandgap by lowering the LUMO energy level and elevating the HOMO level of the polymer, but the BT unit can lower the bandgap only by depressing the LUMO level. Since open-circuit voltage ( V oc ) of the heterojunction polymer solar cell is believed to be inversely proportional to the HOMO level of electron donor material, V oc of the devices based on H9, the copolymer of BDT and TPZ, was ca. 0.5 V lower than that of the device based on H7, the copolymer of BDT and BT. The effects of seven commonly used units on bandgap, molecular energy level, and photovoltaic properties of the BDT based polymers are studied and discussed in this paper, which can provide a guideline not only for design of photovoltaic materials but also for materials of various other electronic devices. In addition, the PCE of the device based on PCBM and H6, one of the BDT-based polymers, reached 1.6%, and V oc, I sc, and FF of the device were 0.75 V, 3.8 mA/cm 2, and 56%, respectively, which indicates that BDT is a promising common unit for photovoltaic conjugated polymers. Since we have developed the synthetic method of the 4,8-bisalkoxy-BDT monomer, the BDT unit will play an important role in future research on conjugated polymer design.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Light-emitting diodes based on conjugated polymers
Burroughes, J. H., Bradley, D. D. C., Brown, A. R., Marks, R. N., Mackay, K., Friend, R. H., Burns, P. L., & Holmes, A. B. (1990) · Nature · doi:10.1038/347539a0 · Cited by 11,393
Handbook of conducting polymers
Skotheim, T. A., Elsenbaumer, R. L., & Reynolds, J. R. (1986) · M. Dekker eBooks · Cited by 8,079
Electroluminescence in conjugated polymers
Friend, R. H., Gymer, R. W., Holmes, A. B., Burroughes, J. H., Marks, R. N., Taliani, C., Bradley, D. D. C., Santos, D. A. D., Brédas, J. L., Lögdlund, M., et al. (1999) · Nature · doi:10.1038/16393 · Cited by 5,977
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
Peet, J., Kim, J. Y., Coates, N. E., Ma, W. L., Moses, D., Heeger, A. J., & Bazan, G. C. (2007) · Nature Materials · doi:10.1038/nmat1928 · Cited by 3,202
Integrated Optoelectronic Devices Based on Conjugated Polymers
Sirringhaus, H., Tessler, N., & Friend, R. H. (1998) · Science · doi:10.1126/science.280.5370.1741 · Cited by 2,736
Synthetic Principles for Bandgap Control in Linear π-Conjugated Systems
Roncali, J. (1997) · Chemical Reviews · doi:10.1021/cr950257t · Cited by 2,155
Conjugated Polymer Photovoltaic Cells
Coakley, K. M., & McGehee, M. D. (2004) · Chemistry of Materials · doi:10.1021/cm049654n · Cited by 2,128
High Photovoltaic Performance of a Low‐Bandgap Polymer
Mühlbacher, D., Scharber, M., Morana, M., Zhu, Z., Waller, D., Gaudiana, R., & Brabec, C. (2006) · Advanced Materials · doi:10.1002/adma.200600160 · Cited by 1,129
Multi-colour organic light-emitting displays by solution processing
Müller, C. D., Falcou, A., Reckefuss, N., Rojahn, M., Wiederhirn, V., Rudati, P., Frohne, H., Nuyken, O., Becker, H., & Meerholz, K. (2003) · Nature · doi:10.1038/nature01390 · Cited by 1,110
Cited by
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
Cheng, Y.-J., Yang, S.-H., & Hsu, C.-S. (2009) · Chemical Reviews · doi:10.1021/cr900182s · Cited by 3,972
Polymer solar cells with enhanced open-circuit voltage and efficiency
Chen, H.-Y., Hou, J., Zhang, S., Liang, Y., Yang, G., Yang, Y., Yu, L., Wu, Y., & Li, G. (2009) · Nature Photonics · doi:10.1038/nphoton.2009.192 · Cited by 3,087
Self-citationLi, Y. (2012) · Accounts of Chemical Research · doi:10.1021/ar2002446 · Cited by 2,756
π-Conjugated Polymers for Organic Electronics and Photovoltaic Cell Applications
Facchetti, A. (2011) · Chemistry of Materials · doi:10.1021/cm102419z · Cited by 2,348
Rational Design of High Performance Conjugated Polymers for Organic Solar Cells
Zhou, H., Yang, L., & You, W. (2012) · Macromolecules · doi:10.1021/ma201648t · Cited by 1,501
Chen, J., & Cao, Y. (2009) · Accounts of Chemical Research · doi:10.1021/ar900061z · Cited by 1,396
Molecular Design of Benzodithiophene-Based Organic Photovoltaic Materials
Yao, H., Ye, L., Zhang, H., Li, S., Zhang, S., & Hou, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00176 · Cited by 1,173
Self-citation25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Dou, L., You, J., Hong, Z., Xu, Z., Li, G., Street, R. A., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302563 · Cited by 1,151
Self-citationImide- and Amide-Functionalized Polymer Semiconductors
Guo, X., Facchetti, A., & Marks, T. J. (2014) · Chemical Reviews · doi:10.1021/cr500225d · Cited by 1,035
Huo, L., Zhang, S., Guo, X., Xu, F., Li, Y., & Hou, J. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201103313 · Cited by 985
Self-citationProcessable Low-Bandgap Polymers for Photovoltaic Applications
Boudreault, P.-L. T., Najari, A., & Leclerc, M. (2011) · Chemistry of Materials · doi:10.1021/cm1021855 · Cited by 827
Advanced materials and processes for polymer solar cell devices
Helgesen, M., Søndergaard, R., & Krebs, F. C. (2010) · J. Mater. Chem. · doi:10.1039/b913168j · Cited by 767
Stille Polycondensation for Synthesis of Functional Materials
Carsten, B., He, F., Son, H. J., Xu, T., & Yu, L. (2011) · Chemical Reviews · doi:10.1021/cr100320w · Cited by 755
Synthesis of a Low Band Gap Polymer and Its Application in Highly Efficient Polymer Solar Cells
Hou, J., Chen, H.-Y., Zhang, S., Chen, R. I., Yang, Y., Wu, Y., & Li, G. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9064975 · Cited by 711
Self-citationYe, L., Zhang, S., Huo, L., Zhang, M., & Hou, J. (2014) · Accounts of Chemical Research · doi:10.1021/ar5000743 · Cited by 699
Self-citationDonor–acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells
Wu, J.-S., Cheng, S.-W., Cheng, Y.-J., & Hsu, C.-S. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00250d · Cited by 629
Wang, M., Hu, X., Liu, P., Li, W., Gong, X., Huang, F., & Cao, Y. (2011) · Journal of the American Chemical Society · doi:10.1021/ja201131h · Cited by 620
Recent progress in organic solar cells (Part I material science)
Liu, Y., Liu, B., Ma, C.-Q., Huang, F., Feng, G., Chen, H., Hou, J., Yan, L., Wei, Q., Luo, Q., et al. (2022) · Science China Chemistry · doi:10.1007/s11426-021-1180-6 · Cited by 613
Self-citationLow bandgap semiconducting polymers for polymeric photovoltaics
Liu, C., Wang, K., Gong, X., & Heeger, A. J. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00650c · Cited by 555
Huo, L., Hou, J., Zhang, S., Chen, H., & Yang, Y. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200906934 · Cited by 535
Self-citationDuan, C., Huang, F., & Cao, Y. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm30470h · Cited by 498
Huo, L., Hou, J., Chen, H.-Y., Zhang, S., Jiang, Y., Chen, T. L., & Yang, Y. (2009) · Macromolecules · doi:10.1021/ma9012972 · Cited by 467
Self-citationAn integrated review of factors influencing the perfomance of photovoltaic panels
Fouad, M. M., Shihata, L. A., & Morgan, E. I. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.141 · Cited by 451
Zhang, M., Guo, X., Zhang, S., & Hou, J. (2014) · Advanced Materials · doi:10.1002/adma.201304427 · Cited by 425
Self-citationWang, E., Mammo, W., & Andersson, M. R. (2014) · Advanced Materials · doi:10.1002/adma.201304945 · Cited by 364
Efficient Polymer Solar Cells Based on the Copolymers of Benzodithiophene and Thienopyrroledione
Zhang, Y., Hau, S. K., Yip, H.-L., Sun, Y., Acton, O., & Jen, A. K.-Y. (2010) · Chemistry of Materials · doi:10.1021/cm100417z · Cited by 352
Low-bandgap conjugated polymers enabling solution-processable tandem solar cells
Li, G., Chang, W.-H., & Yang, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.43 · Cited by 342
Self-citationChochos, C. L., & Choulis, S. A. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.04.003 · Cited by 340
Zhang, S., Ye, L., & Hou, J. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502529 · Cited by 326
Self-citationConjugated polymers for high-efficiency organic photovoltaics
Zhan, X., & Zhu, D. (2010) · Polymer Chemistry · doi:10.1039/b9py00325h · Cited by 317
Dou, L., Chen, C.-C., Yoshimura, K., Ohya, K., Chang, W.-H., Gao, J., Liu, Y., Richard, E., & Yang, Y. (2013) · Macromolecules · doi:10.1021/ma400452j · Cited by 310
Self-citationEnhanced Photovoltaic Performance of Low‐Bandgap Polymers with Deep LUMO Levels
Zhou, H., Yang, L., Price, S. C., Knight, K. J., & You, W. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201003357 · Cited by 303
Narrowing the Band Gap: The Key to High-Performance Organic Photovoltaics
Cheng, P., & Yang, Y. (2020) · Accounts of Chemical Research · doi:10.1021/acs.accounts.0c00157 · Cited by 294
Self-citationLi, K., Li, Z., Feng, K., Xu, X., Wang, L., & Peng, Q. (2013) · Journal of the American Chemical Society · doi:10.1021/ja406220a · Cited by 293
Huo, L., & Hou, J. (2011) · Polymer Chemistry · doi:10.1039/c1py00197c · Cited by 289
Self-citationConjugated polymer–inorganic semiconductor hybrid solar cells
Xu, T., & Qiao, Q. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00632g · Cited by 284
Green chemistry for organic solar cells
Burke, D. J., & Lipomi, D. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41096j · Cited by 283
A Weak Donor−Strong Acceptor Strategy to Design Ideal Polymers for Organic Solar Cells
Zhou, H., Yang, L., Stoneking, S., & You, W. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am1000344 · Cited by 275
Guo, X., Zhou, N., Lou, S. J., Hennek, J. W., Ponce Ortiz, R., Butler, M. R., Boudreault, P.-L. T., Strzalka, J., Morin, P.-O., Leclerc, M., et al. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3081583 · Cited by 265
Self-citationRisko, C., McGehee, M. D., & Brédas, J.-L. (2011) · Chem. Sci. · doi:10.1039/c0sc00642d · Cited by 257
Recent Advances in n‐Type Polymers for All‐Polymer Solar Cells
Genene, Z., Mammo, W., Wang, E., & Andersson, M. R. (2019) · Advanced Materials · doi:10.1002/adma.201807275 · Cited by 256
Chen, C.-H., Hsieh, C.-H., Dubosc, M., Cheng, Y.-J., & Hsu, C.-S. (2010) · Macromolecules · doi:10.1021/ma902206u · Cited by 195
Metadata
- Authors
- Hou, J., Park, M.-H., Zhang, S., Yao, Y., Chen, L.-M., Li, J.-H., & Yang, Y.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-07-23
- Volume
- 41
- Issue
- 16
- Pages
- 6012-6018
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2159878636
- Cited by
- 760
- References
- 30
- FWCI
- 40.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.