The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
New Understanding in Tuning Toughness of β-Polypropylene: The Role of β-Nucleated Crystalline Morphology
Abstract
It is widely believed that the trigonal β-form is favorable and effective for toughening isotactic polypropylene (iPP). Therefore, β-form content should be achieved as high as possible to realize excellent toughness in iPP. However, in this study, we demonstrate that the connection between crystallites might mainly determine the toughness of iPP instead of the β-crystal content. A new rare earth nucleator (WBG) was used to generate the rich β-crystalline structure in the compression-molded bars that were fabricated upon different molten temperatures ( T f ). Interestingly, the increase in tensile elongation can be as large as 8 times for increased T f . The polymorphic composition and overall crystallinity of β-nucleated iPP are almost independent of T f . Nevertheless, the β-nucleated crystalline morphology has completely changed. Three types of β-crystalline morphology, namely, β-spherulite, β-transcrystalline entity, and “flower”-like agglomerate of β-crystallites, are sequentially obtained with increasing T f . From the morphological point of view, the connection between the crystallites in “flower”-like agglomerate is significantly better than that for the crystallites generated under lower T f . Therefore, it is concluded that the formation of β-nucleated iPP provides very good toughness only with sufficient connection between the crystallites. The result of this study clearly verifies the importance of crystal morphology on tuning the toughness of iPP. It provides important information for potential industrial applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Varga, J. (2002) · Journal of Macromolecular Science, Part B · doi:10.1081/mb-120013089 · Cited by 729
Spherulitic Crystallization in Polypropylene
Padden, F. J., & Keith, H. D. (1959) · Journal of Applied Physics · doi:10.1063/1.1734985 · Cited by 680
An improved permanganic etchant for polyolefines
Olley, R. H., & Bassett, D. C. (1982) · Polymer · doi:10.1016/0032-3861(82)90110-0 · Cited by 609
Varga, J., & Menyhárd, A. (2007) · Macromolecules · doi:10.1021/ma062815j · Cited by 300
γ-Isotactic polypropylene. A structure with nonparallel chain axes
Meille, S. V., Brückner, S., & Porzio, W. (1990) · Macromolecules · doi:10.1021/ma00220a014 · Cited by 290
Stocker, W., Schumacher, M., Graff, S., Thierry, A., Wittmann, J.-C., & Lotz, B. (1998) · Macromolecules · doi:10.1021/ma971345d · Cited by 261
The effect of specific β‐nucleation on morphology and mechanical behavior of isotactic polypropylene
Kotek, J., Raab, M., Baldrian, J., & Grellmann, W. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.10701 · Cited by 176
Mechanical behavior of injection molded β‐crystalline phase polypropylene
Tjong, S. C., Shen, J., & Li, R. K. Y. (1996) · Polymer Engineering and Science · doi:10.1002/pen.10390 · Cited by 156
Das Doppelschmelzverhalten derβ-Phase des isotaktischen Polypropylens
Fujiwara, Y. (1975) · Colloid & Polymer Science · doi:10.1007/bf02352075 · Cited by 146
On deformation mechanisms of β-polypropylene 2. Changes of lamellar structure caused by tensile load
Li, J., Cheung, W. L., & Chan, C. (1999) · Polymer · doi:10.1016/s0032-3861(98)00412-1 · Cited by 113
Cited by
Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
Self-citation
Metadata
- Authors
- Luo, F., Geng, C., Wang, K., Deng, H., Chen, F., Fu, Q., & Na, B.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-11-05
- Volume
- 42
- Issue
- 23
- Pages
- 9325-9331
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W1999256596
- Cited by
- 308
- References
- 15
- FWCI
- 10.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.