The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
Strain-Induced Molecular Ordering in Polylactide upon Uniaxial Stretching
Abstract
This study deals with the tensile drawing behavior of a polylactide material containing 4% of d -stereoisomer units, in the amorphous state. The draw temperature domain spanned from the glass transition to the onset of thermal crystallization, namely 70−100 °C. The stress−strain curves exhibit a strain-hardening strongly sensitive to the draw temperature regarding both the onset and the slope of the phenomenon. A detailed structural investigation reveals that various strain-induced phase changes take place depending on the draw temperature. For T d = 70 °C, a mesomorphic form develops from the strain-oriented amorphous chains, starting at a strain level ε ≈ 130%. In the case T d = 90 °C, a well-defined crystalline phase grows beyond the strain ε ≈ 250%. In the midtemperature range, i.e. T d = 80 °C, both the mesomorphic and the crystalline phases are generated in parallel. In all cases, the final weight content of ordered phases at rupture was roughly 30%, irrespective of their form. The observed evolution with increasing draw temperature of the strain-induced structure from mesomorphic to crystalline is quite surprising with regard to the concomitant drop of the strain-hardening. Indeed, if the latter finding is consistent with the thermal activation of plasticity, it also means that the mesomorphic form is almost as much cohesive as the crystalline form in spite of its imperfect ordering. The occurrence of the mesomorphic form is specifically discussed in terms of both chain mobility and thermodynamic metastability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Nano-biocomposites: Biodegradable polyester/nanoclay systems
BORDES, P., POLLET, E., & AVEROUS, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.002 · Cited by 1,033
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913
Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers
Hoogsteen, W., Postema, A. R., Pennings, A. J., Ten Brinke, G., & Zugenmaier, P. (1990) · Macromolecules · doi:10.1021/ma00204a041 · Cited by 864
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607
Biodegradable materials of poly(l-lactic acid): 1. Melt-spun and solution-spun fibres
Eling, B., Gogolewski, S., & Pennings, A. J. (1982) · Polymer · doi:10.1016/0032-3861(82)90176-8 · Cited by 607
Molecular conformation of poly(S‐lactic acid)
De Santis, P., & Kovacs, A. J. (1968) · Biopolymers · doi:10.1002/bip.1968.360060305 · Cited by 575
Sinha Ray, S., Yamada, K., Okamoto, M., & Ueda, K. (2003) · Polymer · doi:10.1016/s0032-3861(02)00818-2 · Cited by 566
Epitaxial crystallization and crystalline polymorphism of polylactides
Cartier, L., Okihara, T., Ikada, Y., Tsuji, H., Puiggali, J., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00234-2 · Cited by 559
Crystallization, structure and properties of plasticized poly(l-lactide)
Kulinski, Z., & Piorkowska, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.101 · Cited by 540
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
The Case for Polylactic Acid as a Commodity Packaging Plastic
Sinclair, R. G. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608010880 · Cited by 453
Crystallization from the melt of poly(lactide)s with different optical purities and their blends
Tsuji, H., & Ikada, Y. (1996) · Macromolecular Chemistry and Physics · doi:10.1002/macp.1996.021971033 · Cited by 379
Toughening of Polylactide by Melt Blending with a Biodegradable Poly(ether)urethane Elastomer
Li, Y., & Shimizu, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700027 · Cited by 371
Tsuji, H., Takai, H., & Saha, S. K. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.074 · Cited by 353
The frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
Preparation and Properties of Plasticized Poly(lactic acid) Films
Ljungberg, N., & Wesslén, B. (2005) · Biomacromolecules · doi:10.1021/bm050098f · Cited by 331
Polylactic Acid: Synthesis, Properties and Applications
Avérous, L. (2008) · Monomers, Polymers and Composites from Renewable Resources · doi:10.1016/b978-0-08-045316-3.00021-1 · Cited by 258
Biodegradable polymer blends of poly( L ‐lactic acid) and gelatinized starch
Park, J. W., Im, S. S., Kim, S. H., & Kim, Y. H. (2000) · Polymer Engineering & Science · doi:10.1002/pen.11384 · Cited by 226
Nam, J. Y., Okamoto, M., Okamoto, H., Nakano, M., Usuki, A., & Matsuda, M. (2006) · Polymer · doi:10.1016/j.polymer.2005.12.066 · Cited by 219
Ohkoshi, I., Abe, H., & Doi, Y. (2000) · Polymer · doi:10.1016/s0032-3861(99)00781-8 · Cited by 206
Lin, N., Chen, G., Huang, J., Dufresne, A., & Chang, P. R. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30308 · Cited by 202
Morphological and Kinetic Analyses of Regime Transition for Poly[(S)-lactide] Crystal Growth
Abe, H., Kikkawa, Y., Inoue, Y., & Doi, Y. (2001) · Biomacromolecules · doi:10.1021/bm015543v · Cited by 179
Influence of biaxial stretching mode on the crystalline texture in polylactic acid films
Ou, X., & Cakmak, M. (2008) · Polymer · doi:10.1016/j.polymer.2008.09.053 · Cited by 130
Yu, J., Ai, F., Dufresne, A., Gao, S., Huang, J., & Chang, P. R. (2008) · Macromolecular Materials and Engineering · doi:10.1002/mame.200800134 · Cited by 124
Schwach, E., Six, J., & Avérous, L. (2008) · Journal of Polymers and the Environment · doi:10.1007/s10924-008-0107-6 · Cited by 112
Crystalline and supermolecular structure of polylactide in relation to the crystallization method
Pluta, M., & Gałęski, A. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11280 · Cited by 108
Orientation prior to crystallisation during drawing of poly(ethylene terephthalate)
Blundell, D. J., Mahendrasingam, A., Martin, C., Fuller, W., Mackerron, D. H., Harvie, J. L., Oldman, R. J., & Riekel, C. (2000) · Polymer · doi:10.1016/s0032-3861(00)00128-2 · Cited by 107
Nonlinear Mechanooptical Behavior of Uniaxially Stretched Poly(lactic acid): Dynamic Phase Behavior
Mulligan, J. H., & Çakmak, M. (2005) · Macromolecules · doi:10.1021/ma048794f · Cited by 97
Rheology of polypropylene in the solid state
Duffo, P., Monasse, B., Haudin, J. M., G'Sell, C., & Dahoun, A. (1995) · Journal of Materials Science · doi:10.1007/bf00356330 · Cited by 92
Evolution of phase behavior and orientation in uniaxially deformed polylactic acid films
Köktürk, G., Piskin, E., Serhatkulu, T. F., & Çakmak, M. (2002) · Polymer Engineering and Science · doi:10.1002/pen.11057 · Cited by 90
Xiao, C., Jho, J. Y., & Yee, A. F. (1994) · Macromolecules · doi:10.1021/ma00088a017 · Cited by 79
Mahendrasingam, A., Blundell, D. J., Parton, M., Wright, A. K., Rasburn, J., Narayanan, T., & Fuller, W. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.081 · Cited by 78
Molecular mechanism of neck formation in uniaxially stretched poly(ethylene naphthalate) films
Çakmak, M., & Lee, S. W. (1995) · Polymer · doi:10.1016/0032-3861(95)90983-9 · Cited by 60
Séguéla, R. (2005) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1081/mc-200067727 · Cited by 58
Plastic Deformation of Amorphous Poly( l / dl -lactide): Structure Evolution and Physical Properties
Pluta, M., & Gałęski, A. (2007) · Biomacromolecules · doi:10.1021/bm061229v · Cited by 50
The drawing behavior of polyethylene copolymers
Capaccio, G., & Ward, I. M. (1984) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1984.180220310 · Cited by 39
Structure development of poly( L ‐lactic acid) fibers processed at various spinning conditions
Ghosh, S., & Vasanthan, N. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.24104 · Cited by 34
Mitchell, G. R., & Lovell, R. (1981) · Acta Crystallographica Section A · doi:10.1107/s0567739481000478 · Cited by 31
Influence of thermal history on the nonisothermal crystallization of poly( L ‐lactide)
Masirek, R., Piórkowska, E., Gałęski, A., & Mucha, M. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26047 · Cited by 27
Fujimori, A., Ninomiya, N., & Masuko, T. (2008) · Polymer Engineering and Science · doi:10.1002/pen.21057 · Cited by 23
Crystallization and Mechanical Propertiesof Poly (D, L) Lactide-based Blown Films
Stoclet, G., Elkoun, S., Gaucher, V., Séguéla, R., & Lefebvre, J. (2007) · International Polymer Processing · doi:10.3139/217.2066 · Cited by 15
Self-citation
Cited by
Stoclet, G., Seguela, R., Lefebvre, J.-M., & Rochas, C. (2010) · Macromolecules · doi:10.1021/ma101430c · Cited by 271
Self-citationZheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Why Is Crystalline Poly(lactic acid) Brittle at Room Temperature?
Razavi, M., & Wang, S.-Q. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00595 · Cited by 212
Tashiro, K., Kouno, N., Wang, H., & Tsuji, H. (2017) · Macromolecules · doi:10.1021/acs.macromol.7b01468 · Cited by 143
Zhou, C., Li, H., Zhang, W., Li, J., Huang, S., Meng, Y., Christiansen, J. D., Yu, D., Wu, Z., & Jiang, S. (2016) · Polymer · doi:10.1016/j.polymer.2016.03.014 · Cited by 85
Metadata
- Authors
- Stoclet, G., Seguela, R., Lefebvre, J. M., Elkoun, S., & Vanmansart, C.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-01-05
- Volume
- 43
- Issue
- 3
- Pages
- 1488-1498
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2065245591
- Cited by
- 266
- References
- 49
- FWCI
- 10.21
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.