The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Preparation and Mechanical Properties of Polypropylene−Clay Hybrids
Abstract
Polypropylene (PP)−clay hybrids (PPCH) have been prepared by simple melt-mixing of three components, i.e., PP, maleic anhydride modified polypropylene oligomers (PP-MA), and clays intercalated with stearylammonium. The dispersibility of 10-Å-thick silicate layers of the clays in the hybrids was investigated by using a transmission electron microscope and X-ray diffractometer. It is found that there are two important factors to achieve the exfoliated and homogeneous dispersion of the layers in the hybrids: (1) the intercalation capability of the oligomers in the layers and (2) the miscibility of the oligomers with PP. Almost complete hybrids were obtained in the case where the PP-MA has both intercalation capability and miscibility. The hybrids exhibit higher storage moduli compared to those of PP especially in the temperature range from T g to 90 °C. The highest relative storage modulus at 80 °C of the hybrid based on a mica and the miscible PP-MA is as high as 2.0 to that of PP and is 2.4 to that of the PP/PP-MA mixture, which is considered to be the matrix of the PPCH. Also, the effects of the kinds of clays and oligomers on the dynamic moduli are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical properties of nylon 6-clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1185 · Cited by 2,442
Self-citationSynthesis of nylon 6-clay hybrid
Usuki, A., Kojima, Y., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1179 · Cited by 2,203
Self-citationHybrid Nanocomposite Materials—between inorganic glasses and organic polymers
Novak, B. M. (1993) · Advanced Materials · doi:10.1002/adma.19930050603 · Cited by 1,445
Synthesis and properties of polyimide–clay hybrid
Yano, K., Usuki, A., Okada, A., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080311009 · Cited by 1,389
Self-citationSynthesis and barrier properties of poly(ε‐caprolactone)‐layered silicate nanocomposites
Messersmith, P. B., & Giannelis, E. P. (1995) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1995.080330707 · Cited by 1,217
Vaia, R. A., Ishii, H., & Giannelis, E. P. (1993) · Chemistry of Materials · doi:10.1021/cm00036a004 · Cited by 1,145
Clay-Reinforced Epoxy Nanocomposites
Lan, T., & Pinnavaia, T. J. (1994) · Chemistry of Materials · doi:10.1021/cm00048a006 · Cited by 1,133
Kinetics of Polymer Melt Intercalation
Vaia, R. A., Jandt, K. D., Kramer, E. J., & Giannelis, E. P. (1995) · Macromolecules · doi:10.1021/ma00128a016 · Cited by 665
Clay-Polymer Nanocomposites Formed from Acidic Derivatives of Montmorillonite and an Epoxy Resin
Wang, M. S., & Pinnavaia, T. J. (1994) · Chemistry of Materials · doi:10.1021/cm00040a022 · Cited by 450
Reduction of residual stress in montmorillonite/epoxy compounds
Kelly, P., Akelah, A., Qutubuddin, S., et al. (1994) · Journal of Materials Science · doi:10.1007/bf00363414 · Cited by 158
Polymer-clay nanocomposites: polystyrene grafted onto montmorillonite interlayers
Moet, A., & Akelah, A. (1993) · Materials Letters · doi:10.1016/0167-577x(93)90064-5 · Cited by 144
Cited by
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Alexandre, M., & Dubois, P. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00012-7 · Cited by 6,377
Polymer nanotechnology: Nanocomposites
Paul, D. R., & Robeson, L. M. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.017 · Cited by 3,317
A review on polymer–layered silicate nanocomposites
Pavlidou, S., & Papaspyrides, C. D. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.008 · Cited by 2,526
Polymer-layered silicate nanocomposites: an overview
LeBaron, P. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00017-4 · Cited by 2,504
Metadata
- Authors
- Kawasumi, M., Hasegawa, N., Kato, M., Usuki, A., & Okada, A.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1997-10-01
- Volume
- 30
- Issue
- 20
- Pages
- 6333-6338
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2076627886
- Cited by
- 1,386
- References
- 11
- FWCI
- 19.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.