The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Preparation and Mechanical Properties of Polypropylene−Clay Hybrids
Abstract
Polypropylene (PP)−clay hybrids (PPCH) have been prepared by simple melt-mixing of three components, i.e., PP, maleic anhydride modified polypropylene oligomers (PP-MA), and clays intercalated with stearylammonium. The dispersibility of 10-Å-thick silicate layers of the clays in the hybrids was investigated by using a transmission electron microscope and X-ray diffractometer. It is found that there are two important factors to achieve the exfoliated and homogeneous dispersion of the layers in the hybrids: (1) the intercalation capability of the oligomers in the layers and (2) the miscibility of the oligomers with PP. Almost complete hybrids were obtained in the case where the PP-MA has both intercalation capability and miscibility. The hybrids exhibit higher storage moduli compared to those of PP especially in the temperature range from T g to 90 °C. The highest relative storage modulus at 80 °C of the hybrid based on a mica and the miscible PP-MA is as high as 2.0 to that of PP and is 2.4 to that of the PP/PP-MA mixture, which is considered to be the matrix of the PPCH. Also, the effects of the kinds of clays and oligomers on the dynamic moduli are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical properties of nylon 6-clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1185 · Cited by 2,442
Self-citationSynthesis of nylon 6-clay hybrid
Usuki, A., Kojima, Y., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1179 · Cited by 2,203
Self-citationHybrid Nanocomposite Materials—between inorganic glasses and organic polymers
Novak, B. M. (1993) · Advanced Materials · doi:10.1002/adma.19930050603 · Cited by 1,445
Synthesis and properties of polyimide–clay hybrid
Yano, K., Usuki, A., Okada, A., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080311009 · Cited by 1,389
Self-citationSynthesis and barrier properties of poly(ε‐caprolactone)‐layered silicate nanocomposites
Messersmith, P. B., & Giannelis, E. P. (1995) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1995.080330707 · Cited by 1,217
Vaia, R. A., Ishii, H., & Giannelis, E. P. (1993) · Chemistry of Materials · doi:10.1021/cm00036a004 · Cited by 1,145
Clay-Reinforced Epoxy Nanocomposites
Lan, T., & Pinnavaia, T. J. (1994) · Chemistry of Materials · doi:10.1021/cm00048a006 · Cited by 1,133
Kinetics of Polymer Melt Intercalation
Vaia, R. A., Jandt, K. D., Kramer, E. J., & Giannelis, E. P. (1995) · Macromolecules · doi:10.1021/ma00128a016 · Cited by 665
Clay-Polymer Nanocomposites Formed from Acidic Derivatives of Montmorillonite and an Epoxy Resin
Wang, M. S., & Pinnavaia, T. J. (1994) · Chemistry of Materials · doi:10.1021/cm00040a022 · Cited by 450
Reduction of residual stress in montmorillonite/epoxy compounds
Kelly, P., Akelah, A., Qutubuddin, S., et al. (1994) · Journal of Materials Science · doi:10.1007/bf00363414 · Cited by 158
Cited by
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Alexandre, M., & Dubois, P. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00012-7 · Cited by 6,377
Polymer nanotechnology: Nanocomposites
Paul, D. R., & Robeson, L. M. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.017 · Cited by 3,317
A review on polymer–layered silicate nanocomposites
Pavlidou, S., & Papaspyrides, C. D. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.008 · Cited by 2,526
Polymer-layered silicate nanocomposites: an overview
LeBaron, P. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00017-4 · Cited by 2,504
Hussain, F., Hojjati, M., Okamoto, M., & Gorga, R. E. (2006) · Journal of Composite Materials · doi:10.1177/0021998306067321 · Cited by 2,227
Structural engineering of polyurethane coatings for high performance applications
Chattopadhyay, D. K., & Raju, K. V. S. N. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.05.003 · Cited by 1,836
Nanocomposites: synthesis, structure, properties and new application opportunities
Camargo, P. H. C., Satyanarayana, K. G., & Wypych, F. (2009) · Materials Research · doi:10.1590/s1516-14392009000100002 · Cited by 1,350
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
Nylon 6 nanocomposites by melt compounding
Cho, J. W., & Paul, D. R. (2001) · Polymer · doi:10.1016/s0032-3861(00)00380-3 · Cited by 1,045
Manias, E., Touny, A., Wu, L., Strawhecker, K., Lu, B., & Chung, T. C. (2001) · Chemistry of Materials · doi:10.1021/cm0110627 · Cited by 903
Natural Biopolymer-Based Nanocomposite Films for Packaging Applications
Rhim, J.-W., & Ng, P. K. W. (2007) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408390600846366 · Cited by 849
Twenty Years of Polymer‐Clay Nanocomposites
Okada, A., & Usuki, A. (2006) · Macromolecular Materials and Engineering · doi:10.1002/mame.200600260 · Cited by 749
Self-citationPolymer Nanocomposites—A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers
Bhattacharya, M. (2016) · Materials · doi:10.3390/ma9040262 · Cited by 747
Rheology of Polypropylene/Clay Hybrid Materials
Solomon, M. J., Almusallam, A. S., Seefeldt, K. F., Somwangthanaroj, A., & Varadan, P. (2001) · Macromolecules · doi:10.1021/ma001122e · Cited by 653
A Rheological Study on the Kinetics of Hybrid Formation in Polypropylene Nanocomposites
Galgali, G., Ramesh, C., & Lele, A. (2001) · Macromolecules · doi:10.1021/ma000565f · Cited by 596
Synthesis of epoxy–clay nanocomposites: influence of the nature of the clay on structure
Kornmann, X., Lindberg, H., & Berglund, L. A. (2001) · Polymer · doi:10.1016/s0032-3861(00)00346-3 · Cited by 580
Polymer nanocomposites: from fundamental research to specific applications
Fischer, H. (2003) · Materials Science and Engineering: C · doi:10.1016/j.msec.2003.09.148 · Cited by 571
Vadukumpully, S., Paul, J., Mahanta, N., & Valiyaveettil, S. (2011) · Carbon · doi:10.1016/j.carbon.2010.09.004 · Cited by 561
Nanocomposites Derived from Polymers and Inorganic Nanoparticles
Jeon, I.-Y., & Baek, J.-B. (2010) · Materials · doi:10.3390/ma3063654 · Cited by 513
Lertwimolnun, W., & Vergnes, B. (2005) · Polymer · doi:10.1016/j.polymer.2005.02.018 · Cited by 490
Recent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials
Tang, X. Z., Kumar, P., Alavi, S., & Sandeep, K. P. (2012) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2010.500508 · Cited by 477
Maiti, P., Nam, P. H., Okamoto, M., Hasegawa, N., & Usuki, A. (2002) · Macromolecules · doi:10.1021/ma010852z · Cited by 445
Self-citationSynthesis and characterization of maleated polyethylene/clay nanocomposites
Wang, K. H., Choi, M. H., Koo, C. M., Choi, Y. S., & Chung, I. J. (2001) · Polymer · doi:10.1016/s0032-3861(01)00509-2 · Cited by 442
Sinha Ray, S., Pouliot, S., Bousmina, M., & Utracki, L. A. (2004) · Polymer · doi:10.1016/j.polymer.2004.10.009 · Cited by 436
Preparation and characterization of graphite nanosheets from ultrasonic powdering technique
Chen, G., Weng, W., Wu, D., Wu, C., Lu, J., Wang, P., & Chen, X. (2004) · Carbon · doi:10.1016/j.carbon.2003.12.074 · Cited by 434
Nanocomposites formed from linear low density polyethylene and organoclays
Hotta, S., & Paul, D. R. (2004) · Polymer · doi:10.1016/j.polymer.2004.08.059 · Cited by 423
A critical appraisal of polymer–clay nanocomposites
Chen, B., Evans, J. R. G., Greenwell, H. C., Boulet, P., Coveney, P. V., Bowden, A. A., & Whiting, A. (2008) · Chem. Soc. Rev. · doi:10.1039/b702653f · Cited by 416
Ljungberg, N., Bonini, C., Bortolussi, F., Boisson, C., Heux, L., & Cavaillé (2005) · Biomacromolecules · doi:10.1021/bm050222v · Cited by 395
Synthetic, layered nanoparticles for polymeric nanocomposites (PNCs)
Utracki, L. A., Sepehr, M., & Boccaleri, E. (2007) · Polymers for Advanced Technologies · doi:10.1002/pat.852 · Cited by 395
Weimer, M. W., Chen, H., Giannelis, E. P., & Sogah, D. Y. (1999) · Journal of the American Chemical Society · doi:10.1021/ja983751y · Cited by 390
Clay/polymer composites: the story
Gao, F. (2004) · Materials Today · doi:10.1016/s1369-7021(04)00509-7 · Cited by 365
Polymer Layered Silicate Nanocomposites: A Review
Mittal, V. (2009) · Materials · doi:10.3390/ma2030992 · Cited by 344
Lincoln, D. M., Vaia, R. A., Wang, Z.-G., & Hsiao, B. S. (2001) · Polymer · doi:10.1016/s0032-3861(00)00414-6 · Cited by 326
Microstructure, tensile properties, and biodegradability of aliphatic polyester/clay nanocomposites
Lee, S.-R., Park, H.-M., Lim, H., Kang, T., Li, X., Cho, W.-J., & Ha, C.-S. (2002) · Polymer · doi:10.1016/s0032-3861(02)00012-5 · Cited by 324
Hasegawa, N., Okamoto, H., Kato, M., & Usuki, A. (2000) · Journal of Applied Polymer Science · doi:10.1002/1097-4628(20001209)78:11<1918::aid-app100>3.0.co;2-h · Cited by 314
Self-citationPolypropylene–polyhedral oligomeric silsesquioxanes (POSS) nanocomposites
Fina, A., Tabuani, D., Frache, A., & Camino, G. (2005) · Polymer · doi:10.1016/j.polymer.2005.06.121 · Cited by 313
A short review on rubber/clay nanocomposites with emphasis on mechanical properties
Sengupta, R., Chakraborty, S., Bandyopadhyay, S., Dasgupta, S., Mukhopadhyay, R., Auddy, K., & Deuri, A. S. (2007) · Polymer Engineering & Science · doi:10.1002/pen.20921 · Cited by 307
Usuki, A., Hasegawa, N., Kato, M., & Kobayashi, S. (2005) · Advances in Polymer Science · doi:10.1007/b104481 · Cited by 301
Self-citationChow, W. S., Mohd Ishak, Z. A., Karger-Kocsis, J., Apostolov, A. A., & Ishiaku, U. S. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.006 · Cited by 291
TPO based nanocomposites. Part 1. Morphology and mechanical properties
Lee, H.-S., Fasulo, P. D., Rodgers, W. R., & Paul, D. R. (2005) · Polymer · doi:10.1016/j.polymer.2005.09.068 · Cited by 284
Zheng, L., Farris, R. J., & Coughlin, E. B. (2001) · Macromolecules · doi:10.1021/ma0110094 · Cited by 284
Nanocomposites of isotactic polypropylene reinforced with rod-like cellulose whiskers
Ljungberg, N., Cavaillé, J.-Y., & Heux, L. (2006) · Polymer · doi:10.1016/j.polymer.2006.07.013 · Cited by 272
Model for the Viscosity of Particle Dispersions
BICERANO, J., DOUGLAS, J. F., & BRUNE, D. A. (1999) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-100101428 · Cited by 271
Organic–inorganic hybrid of chitosan/organoclay bionanocomposites for hexavalent chromium uptake
Pandey, S., & Mishra, S. B. (2011) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2011.05.031 · Cited by 271
Yang, L., Phua, S. L., Teo, J. K. H., Toh, C. L., Lau, S. K., Ma, J., & Lu, X. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200532j · Cited by 271
Morphology and properties of waterborne polyurethane/clay nanocomposites
Kim, B. K., Seo, J. W., & Jeong, H. M. (2003) · European Polymer Journal · doi:10.1016/s0014-3057(02)00173-8 · Cited by 266
Hasegawa, N., Okamoto, H., Kato, M., Usuki, A., & Sato, N. (2003) · Polymer · doi:10.1016/s0032-3861(03)00215-5 · Cited by 261
Self-citationProcessing of nanostructured polymers and advanced polymeric based nanocomposites
Peponi, L., Puglia, D., Torre, L., Valentini, L., & Kenny, J. M. (2014) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2014.08.002 · Cited by 257
Crystallinity and Chain Conformation in PEO/Layered Silicate Nanocomposites
Chrissopoulou, K., Andrikopoulos, K. S., Fotiadou, S., Bollas, S., Karageorgaki, C., Christofilos, D., Voyiatzis, G. A., & Anastasiadis, S. H. (2011) · Macromolecules · doi:10.1021/ma201711r · Cited by 134
Mechanical properties of attapulgite clay reinforced polyurethane shape-memory nanocomposites
Xu, B., Huang, W. M., Pei, Y. T., Chen, Z. G., Kraft, A., Reuben, R., De Hosson, J. T. M., & Fu, Y. Q. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.04.004 · Cited by 123
(2007) · Food Science and Biotechnology · Cited by 74
Ji, X., Zhang, W., Shan, L., Tian, Y., & Liu, J. (2015) · Scientific Reports · doi:10.1038/srep18367 · Cited by 37
Macro, micro and nanostructured morphologies of multiphase polymer systems
Huang, H. (2011) · Handbook of Multiphase Polymer Systems · doi:10.1002/9781119972020.ch6 · Cited by 16
Metadata
- Authors
- Kawasumi, M., Hasegawa, N., Kato, M., Usuki, A., & Okada, A.
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1997-10-01
- Volume
- 30
- Issue
- 20
- Pages
- 6333-6338
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2076627886
- Cited by
- 1,386
- References
- 11
- FWCI
- 19.43
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.