Polysaccharide Microcrystals Reinforced Amorphous Poly(β-hydroxyoctanoate) Nanocomposite Materials
The DOI matches its Crossref record; 38 of the 39 references it cites were found in a registry or an index.
Abstract
In a previous work [ Macromolecules 1998, 31, 6426] the preparation technique of a latex of poly(β-hydroxyoctanoate) (PHO) obtained from Pseudomonas oleovorans grown at high cell density on sodium octanoate was presented. The resulting films displayed typical properties of thermoplastic elastomer. Depending on the experimental purification conditions, fully amorphous PHO films can be obtained. Nanocomposite materials were prepared using this latex as a matrix and using a colloidal suspension of hydrolyzed starch or cellulose whiskers as a natural and biodegradable filler. After stirring, the preparations were either cast and evaporated or freeze-dried and molded. High-performance materials were obtained from these systems, preserving the natural character of PHO. The resulting properties were strongly related to the aspect ratio L / d ( L being the length and d the diameter) of the filler and to the geometric and mechanical percolation effects. In addition, specific polymer−filler interactions and geometrical constraint due to the particle size of the latex have to be considered to account for the mechanical reinforcement effect of cellulose whiskers.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The strong reinforcing effect of the whiskers is generally attributed to the formation of a percolating network structure above the percolation threshold resulting from hydrogen bonding between nanoparticles [107].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [107]
Citations
Cites
Scaling concepts in polymer physics
Gordon, M. (1981) · Polymer · doi:10.1016/0032-3861(81)90183-x · Cited by 10,288
Scaling Concepts in Polymer Physics
de Gennes, P. G., & Witten, T. A. (1980) · Physics Today · doi:10.1063/1.2914118 · Cited by 9,348
Introduction to Percolation Theory
Stauffer, D., & Aharony, A. (1985) · Taylor & Francis eBooks · doi:10.4324/9780203211595 · Cited by 3,727
Occurrence, metabolism, metabolic role, and industrial uses of bacterial polyhydroxyalkanoates
Anderson, A. J., & DAWES, E. A. (1990) · Microbiological Reviews · doi:10.1128/mmbr.54.4.450-472.1990 · Cited by 2,912
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Brandl, H., Gross, R. A., Lenz, R. W., & Fuller, R. C. (1988) · Applied and Environmental Microbiology · doi:10.1128/aem.54.8.1977-1982.1988 · Cited by 869
The Role and Regulation of Energy Reserve Polymers in Micro-organisms
Dawes, E. A., & Senior, P. J. (1973) · Advances in Microbial Physiology · doi:10.1016/s0065-2911(08)60088-0 · Cited by 857
Lageveen, R. G., Huisman, G. W., Preusting, H., Ketelaar, P., Eggink, G., & Witholt, B. (1988) · Applied and Environmental Microbiology · doi:10.1128/aem.54.12.2924-2932.1988 · Cited by 694
Nanocomposite materials from latex and cellulose whiskers
Favier, V., Canova, G. R., Cavaillé, J. Y., Chanzy, H., Dufresne, A., & Gauthier, C. (1995) · Polymers for Advanced Technologies · doi:10.1002/pat.1995.220060514 · Cited by 561
Self-citationTashiro, K., & Kobayashi, M. (1991) · Polymer · doi:10.1016/0032-3861(91)90435-l · Cited by 483
Research works printed but not linked: 13
- Erson A. J., 1990, Microbiol. Rev., 54, 450, 10.1128/mr.54.4.450-472.1990 · DOI · Paper page
- Doi, 1990, Microbial Polyesters
- Lauzier C. A., 1993, Tappi J., 76, 71
- Dawes E. A., 1973, J. Adv. Microbiol. Physiol., 10, 135, 10.1016/s0065-2911(08)60088-0 · DOI · Paper page
- Dufresne A., 1998, Part B: Polym. Phys
- Mitchell J., 1948, Aquametry
- Dufresne A., 1998, Recent Res. Dev. Macromol. Res., 3, 455
- Tsai S. W., 1969, Composite Materials Workshop; Technomic: Stanford, CT
- Nishino T., 1995, Part B: Polym. Phys
- Ouali N., 1991, Plast. Rub. Compos. Process. Appl., 16, 55
- Garcia-Ramirez M., 1995, Part B: Polym. Phys
- Batten G. L., 1987, TAPPI, 70, 119
- Nissan A. H., 1987, TAPPI, 70, 128
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Cellulose nanocrystals: chemistry, self-assembly, and applications
Habibi, Y., Lucia, L. A., & Rojas, O. J. (2010) · Chemical Reviews · doi:10.1021/cr900339w · Cited by 5,980
Nanocelluloses: A New Family of Nature‐Based Materials
Klemm, D., Kramer, F., Moritz, S., Lindström, T., Ankerfors, M., Gray, D., & Dorris, A. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201001273 · Cited by 4,465
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Self-citationAzizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citation
Metadata
- Authors
- Dubief, D., Samain, E., & Dufresne, A.
- Affiliations
- Centre National de la Recherche Scientifique (FR)
- Corresponding author
- Dufresne, Alain
- ORCID
- Dufresne, Alain
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 1999-08-14
- Volume
- 32
- Issue
- 18
- Pages
- 5765-5771
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W2035810610
- Cited by
- 259
- References
- 39
- Citations by year
- 2026: 1 · 2023: 2 · 2022: 1 · 2021: 5 · 2020: 6 · 2019: 10 · 2018: 15 · 2017: 18 · 2016: 17 · 2015: 13 · 2014: 22 · 2013: 12 · 2012: 17
- FWCI
- 3.48
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Macromolecules (publishedVersion)
- HAL (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Keywords
- biodegradable polyesters, cellulose whiskers, hydrolyzed starch, nanocomposites, mechanical reinforcement, filler aspect ratio, percolation effect, filler-polymer interaction, latex films, Pseudomonas oleovorans, sodium octanoate, freeze-drying, biodegradable fillers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.