The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Use of Negative Capacitance to Provide Voltage Amplification for Low Power Nanoscale Devices
Abstract
It is well-known that conventional field effect transistors (FETs) require a change in the channel potential of at least 60 mV at 300 K to effect a change in the current by a factor of 10, and this minimum subthreshold slope S puts a fundamental lower limit on the operating voltage and hence the power dissipation in standard FET-based switches. Here, we suggest that by replacing the standard insulator with a ferroelectric insulator of the right thickness it should be possible to implement a step-up voltage transformer that will amplify the gate voltage thus leading to values of S lower than 60 mV/decade and enabling low voltage/low power operation. The voltage transformer action can be understood intuitively as the result of an effective negative capacitance provided by the ferroelectric capacitor that arises from an internal positive feedback that in principle could be obtained from other microscopic mechanisms as well. Unlike other proposals to reduce S, this involves no change in the basic physics of the FET and thus does not affect its current drive or impose other restrictions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design challenges of technology scaling
Borkar, S. (1999) · IEEE Micro · doi:10.1109/40.782564 · Cited by 1,164
Band-to-Band Tunneling in Carbon Nanotube Field-Effect Transistors
Appenzeller, J., Lin, Y.-M., Knoch, J., & Avouris, P. (2004) · Physical Review Letters · doi:10.1103/physrevlett.93.196805 · Cited by 880
Double Hysteresis Loop of BaTiO3at the Curie Point
Merz, W. J. (1953) · Physical Review · doi:10.1103/physrev.91.513 · Cited by 580
Limits to binary logic switch scaling-a gedanken model
Zhirnov, V. V., Cavin, R. K., Hutchby, J. A., & Bourianoff, G. I. (2003) · Proceedings of the IEEE · doi:10.1109/jproc.2003.818324 · Cited by 482
End of Moore's law: thermal (noise) death of integration in micro and nano electronics
Kish, L. B. (2002) · Physics Letters A · doi:10.1016/s0375-9601(02)01365-8 · Cited by 444
A phenomenological thermodynamic potential for BaTiO3 single crystals
Li, Y. L., Cross, L. E., & Chen, L. Q. (2005) · Journal of Applied Physics · doi:10.1063/1.2042528 · Cited by 444
Interacting systems for self-correcting low power switching
Salahuddin, S., & Datta, S. (2007) · Applied Physics Letters · doi:10.1063/1.2709640 · Cited by 96
Self-citation
Cited by
Tunnel field-effect transistors as energy-efficient electronic switches
Ionescu, A. M., & Riel, H. (2011) · Nature · doi:10.1038/nature10679 · Cited by 2,941
Low-Voltage Tunnel Transistors for Beyond CMOS Logic
Seabaugh, A. C., & Zhang, Q. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070470 · Cited by 1,635
Thin-film ferroelectric materials and their applications
Martin, L. W., & Rappe, A. M. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.87 · Cited by 1,071
Multigate transistors as the future of classical metal–oxide–semiconductor field-effect transistors
Ferain, I., Colinge, C. A., & Colinge, J.-P. (2011) · Nature · doi:10.1038/nature10676 · Cited by 1,026
Two-dimensional transition metal dichalcogenides: interface and defect engineering
Hu, Z., Wu, Z., Han, C., He, J., Ni, Z., & Chen, W. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00024g · Cited by 864
Metadata
- Authors
- Salahuddin, S., & Datta, S.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-12-06
- Volume
- 8
- Issue
- 2
- Pages
- 405-410
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2016106189
- Cited by
- 2,164
- References
- 8
- FWCI
- 12.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.