The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
In Situ Transmission Electron Microscopy Observation of Pulverization of Aluminum Nanowires and Evolution of the Thin Surface Al2O3 Layers during Lithiation–Delithiation Cycles
Abstract
Lithiation-delithiation cycles of individual aluminum nanowires (NWs) with naturally oxidized Al(2)O(3) surface layers (thickness 4-5 nm) were conducted in situ in a transmission electron microscope. Surprisingly, the lithiation was always initiated from the surface Al(2)O(3) layer, forming a stable Li-Al-O glass tube with a thickness of about 6-10 nm wrapping around the NW core. After lithiation of the surface Al(2)O(3) layer, lithiation of the inner Al core took place, which converted the single crystal Al to a polycrystalline LiAl alloy, with a volume expansion of about 100%. The Li-Al-O glass tube survived the 100% volume expansion, by enlarging through elastic and plastic deformation, acting as a solid electrolyte with exceptional mechanical robustness and ion conduction. Voids were formed in the Al NWs during the initial delithiation step and grew continuously with each subsequent delithiation, leading to pulverization of the Al NWs to isolated nanoparticles confined inside the Li-Al-O tube. There was a corresponding loss of capacity with each delithiation step when arrays of NWs were galvonostatically cycled. The results provide important insight into the degradation mechanism of lithium-alloy electrodes and into recent reports about the performance improvement of lithium ion batteries by atomic layer deposition of Al(2)O(3) onto the active materials or electrodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Research on Advanced Materials for Li‐ion Batteries
Li, H., Wang, Z., Chen, L., & Huang, X. (2009) · Advanced Materials · doi:10.1002/adma.200901710 · Cited by 1,803
Electrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2
Reimers, J. N., & Dahn, J. R. (1992) · Journal of The Electrochemical Society · doi:10.1149/1.2221184 · Cited by 1,723
Li-alloy based anode materials for Li secondary batteries
Park, C.-M., Kim, J.-H., Kim, H., & Sohn, H.-J. (2010) · Chemical Society Reviews · doi:10.1039/b919877f · Cited by 1,703
In Situ Observation of the Electrochemical Lithiation of a Single SnO 2 Nanowire Electrode
Huang, J. Y., Zhong, L., Wang, C. M., Sullivan, J. P., Xu, W., Zhang, L. Q., Mao, S. X., Hudak, N. S., Liu, X. H., Subramanian, A., et al. (2010) · Science · doi:10.1126/science.1195628 · Cited by 1,563
Self-citationWill advanced lithium-alloy anodes have a chance in lithium-ion batteries?
Besenhard, J. O., Yang, J., & Winter, M. (1997) · Journal of Power Sources · doi:10.1016/s0378-7753(96)02547-5 · Cited by 943
Cathode materials modified by surface coating for lithium ion batteries
Li, C., Zhang, H. P., Fu, L. J., Liu, H., Wu, Y. P., Rahm, E., Holze, R., & Wu, H. Q. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.11.015 · Cited by 624
Jung, Y. S., Cavanagh, A. S., Riley, L. A., Kang, S., Dillon, A. C., Groner, M. D., George, S. M., & Lee, S. (2010) · Advanced Materials · doi:10.1002/adma.200903951 · Cited by 560
Light-Weight Free-Standing Carbon Nanotube-Silicon Films for Anodes of Lithium Ion Batteries
Cui, L., Hu, L., Choi, J. W., et al. (2010) · ACS Nano · doi:10.1021/nn100619m · Cited by 555
Limthongkul, P., Jang, Y.-I., Dudney, N. J., & Chiang, Y. (2003) · Acta Materialia · doi:10.1016/s1359-6454(02)00514-1 · Cited by 511
Ultrathin Coatings on Nano-LiCoO2for Li-Ion Vehicular Applications
Scott, I. D., Jung, Y. S., Cavanagh, A. S., Yan, Y., Dillon, A. C., George, S. M., & Lee, S.-H. (2011) · Nano Letters · doi:10.1021/nl1030198 · Cited by 379
Jung, Y. S., Cavanagh, A. S., Dillon, A. C., Groner, M. D., George, S. M., & Lee, S.-H. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3258274 · Cited by 361
Campbell, T., Kalia, R. K., Nakano, A., Vashishta, P., Ogata, S., & Rodgers, S. (1999) · Physical Review Letters · doi:10.1103/physrevlett.82.4866 · Cited by 330
Ultrathin Multifunctional Oxide Coatings for Lithium Ion Batteries
Xiao, X., Lu, P., & Ahn, D. (2011) · Advanced Materials · doi:10.1002/adma.201101915 · Cited by 268
Aluminum negative electrode in lithium ion batteries
Hamon, Y., Brousse, T., Jousse, F., Topart, P., Buvat, P., & Schleich, D. M. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00616-4 · Cited by 259
Rechargeable lithium battery anodes: alternatives to metallic lithium
Fauteux, D., & Koksbang, R. (1993) · Journal of Applied Electrochemistry · doi:10.1007/bf00241568 · Cited by 175
Conformal Surface Coatings to Enable High Volume Expansion Li‐Ion Anode Materials
Riley, L. A., Cavanagh, A. S., George, S. M., Jung, Y. S., Yan, Y., Lee, S., & Dillon, A. C. (2010) · ChemPhysChem · doi:10.1002/cphc.201000158 · Cited by 141
Dimensionally stable Li-alloy electrodes for secondary batteries
Besenhard, J. O., HESS, M., & KOMENDA, P. (1990) · Solid State Ionics · doi:10.1016/0167-2738(90)90062-v · Cited by 126
Miller, D. C., Foster, R. R., Zhang, Y., Jen, S., Bertrand, J. A., Lu, Z., Seghete, D., O’Patchen, J., Yang, R., Lee, Y.-C., et al. (2009) · Journal of Applied Physics · doi:10.1063/1.3124642 · Cited by 116
Al-based anode materials for Li-ion batteries
Lindsay, M. J., Wang, G., & Liu, H. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(03)00130-7 · Cited by 103
Free standing aluminum nanostructures as anodes for Li-ion rechargeable batteries
Au, M., McWhorter, S., Ajo, H. M., Adams, T. M., Zhao, Y., & Gibbs, J. G. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.102 · Cited by 85
Improved Mechanical Integrity of ALD-Coated Composite Electrodes for Li-Ion Batteries
Riley, L. A., Cavanagh, A. S., George, S. M., Lee, S.-H., & Dillon, A. C. (2010) · Electrochemical and Solid-State Letters · doi:10.1149/1.3529367 · Cited by 55
Cycling-induced stress in lithium ion negative electrodes: LiAl/LiFePO4 and Li4Ti5O12/LiFePO4 cells
Morales, J., Trócoli, R., Franger, S., & Santos-Peña, J. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2009.12.104 · Cited by 40
Nanostructured Lithium-Aluminum Alloy Electrodes for Lithium-Ion Batteries
Hudak, N. S., & Huber, D. L. (2011) · ECS Transactions · doi:10.1149/1.3557706 · Cited by 30
Self-citationCo3O4 coated Al composites as anode materials for lithium ion batteries
Lei, X., & Ma, J. (2009) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2009.05.041 · Cited by 18
Cited by
Li-ion battery materials: present and future
Nitta, N., Wu, F., Lee, J. T., & Yushin, G. (2015) · Materials Today · doi:10.1016/j.mattod.2014.10.040 · Cited by 7,389
Size-Dependent Fracture of Silicon Nanoparticles During Lithiation
Liu, X. H., Zhong, L., Huang, S., Mao, S. X., Zhu, T., & Huang, J. Y. (2012) · ACS Nano · doi:10.1021/nn204476h · Cited by 2,376
Self-citationNanostructured anode materials for lithium ion batteries
Roy, P., & Srivastava, S. K. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04980b · Cited by 813
Nitta, N., & Yushin, G. (2014) · Particle & Particle Systems Characterization · doi:10.1002/ppsc.201300231 · Cited by 724
Nanowire Electrodes for Electrochemical Energy Storage Devices
Mai, L., Tian, X., Xu, X., Chang, L., & Xu, L. (2014) · Chemical Reviews · doi:10.1021/cr500177a · Cited by 700
Metadata
- Authors
- Liu, Y., Hudak, N. S., Huber, D. L., Limmer, S. J., Sullivan, J. P., & Huang, J. Y.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-09-01
- Volume
- 11
- Issue
- 10
- Pages
- 4188-4194
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2056194919
- Cited by
- 302
- References
- 24
- FWCI
- 13.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.