The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Integrated Circuits Based on Bilayer MoS2 Transistors
Open accessAbstract
Two-dimensional (2D) materials, such as molybdenum disulfide (MoS(2)), have been shown to exhibit excellent electrical and optical properties. The semiconducting nature of MoS(2) allows it to overcome the shortcomings of zero-bandgap graphene, while still sharing many of graphene's advantages for electronic and optoelectronic applications. Discrete electronic and optoelectronic components, such as field-effect transistors, sensors, and photodetectors made from few-layer MoS(2) show promising performance as potential substitute of Si in conventional electronics and of organic and amorphous Si semiconductors in ubiquitous systems and display applications. An important next step is the fabrication of fully integrated multistage circuits and logic building blocks on MoS(2) to demonstrate its capability for complex digital logic and high-frequency ac applications. This paper demonstrates an inverter, a NAND gate, a static random access memory, and a five-stage ring oscillator based on a direct-coupled transistor logic technology. The circuits comprise between 2 to 12 transistors seamlessly integrated side-by-side on a single sheet of bilayer MoS(2). Both enhancement-mode and depletion-mode transistors were fabricated thanks to the use of gate metals with different work functions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-dimensional atomic crystals
Novoselov, K. S., Jiang, D., Schedin, F., Booth, T. J., Khotkevich, V. V., Morozov, S. V., & Geim, A. K. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0502848102 · Cited by 11,788
Cited by
Electronics and optoelectronics of two-dimensional transition metal dichalcogenides
Wang, Q. H., Kalantar-Zadeh, K., Kis, A., Coleman, J. N., & Strano, M. S. (2012) · Nature Nanotechnology · doi:10.1038/nnano.2012.193 · Cited by 16,374
The chemistry of two-dimensional layered transition metal dichalcogenide nanosheets
Chhowalla, M., Shin, H. S., Eda, G., Li, L.-J., Loh, K. P., & Zhang, H. (2013) · Nature Chemistry · doi:10.1038/nchem.1589 · Cited by 10,034
Self-citationProgress, Challenges, and Opportunities in Two-Dimensional Materials Beyond Graphene
Butler, S. Z., Hollen, S. M., Cao, L., Cui, Y., Gupta, J. A., Gutiérrez, H. R., Heinz, T. F., Hong, S. S., Huang, J., Ismach, A. F., et al. (2013) · ACS Nano · doi:10.1021/nn400280c · Cited by 4,878
Emerging Device Applications for Semiconducting Two-Dimensional Transition Metal Dichalcogenides
Jariwala, D., Sangwan, V. K., Lauhon, L. J., Marks, T. J., & Hersam, M. C. (2014) · ACS Nano · doi:10.1021/nn500064s · Cited by 2,753
Metal dichalcogenide nanosheets: preparation, properties and applications
Huang, X., Zeng, Z., & Zhang, H. (2013) · Chemical Society Reviews · doi:10.1039/c2cs35387c · Cited by 2,030
Metadata
- Authors
- Wang, H., Yu, L., Lee, Y.-H., Shi, Y., Hsu, A., Chin, M. L., Li, L.-J., Dubey, M., Kong, J., & Palacios, T.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-08-10
- Volume
- 12
- Issue
- 9
- Pages
- 4674-4680
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W1975628705
- Cited by
- 1,738
- References
- 1
- FWCI
- 67.04
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.