The DOI matches its Crossref record.
Aerosol Jet Printed, Low Voltage, Electrolyte Gated Carbon Nanotube Ring Oscillators with Sub-5 μs Stage Delays
Abstract
A central challenge for printed electronics is to achieve high operating frequencies (short transistor switching times) at low supply biases compatible with thin film batteries. In this report, we demonstrate partially printed five-stage ring oscillators with >20 kHz operating frequencies and stage delays <5 μs at supply voltages below 3 V. The fastest ring oscillator achieved 1.2 μs delay time at 2 V supply. The inverter stages in these ring oscillators were based on ambipolar thin film transistors (TFTs) employing semiconducting, single-walled carbon nanotube (CNT) networks and a high capacitance (∼1 μF/cm(2)) ion gel electrolyte as the gate dielectric. All materials except the source and drain electrodes were aerosol jet printed. The TFTs exhibited high electron and hole mobilities (∼20 cm(2)/(V s)) and ON/OFF current ratios (up to 10(5)). Inverter switching times t were systematically characterized as a function of transistor channel length and ionic conductivity of the gel dielectric, demonstrating that both the semiconductor and the ion gel play a role in switching speed. Quantitative scaling analysis suggests that with suitable optimization low voltage, printed ion gel gated CNT inverters could operate at frequencies on the order of 1 MHz.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
Electronics based on two-dimensional materials
Fiori, G., Bonaccorso, F., Iannaccone, G., Palacios, T., Neumaier, D., Seabaugh, A., Banerjee, S. K., & Colombo, L. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.207 · Cited by 3,176
Building devices from colloidal quantum dots
Kagan, C. R., Lifshitz, E., Sargent, E. H., & Talapin, D. V. (2016) · Science · doi:10.1126/science.aac5523 · Cited by 1,404
Nanomaterials in transistors: From high-performance to thin-film applications
Franklin, A. D. (2015) · Science · doi:10.1126/science.aab2750 · Cited by 660
Endeavor of Iontronics: From Fundamentals to Applications of Ion‐Controlled Electronics
Bisri, S. Z., Shimizu, S., Nakano, M., & Iwasa, Y. (2017) · Advanced Materials · doi:10.1002/adma.201607054 · Cited by 558
Huang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
Power generation for wearable systems
Gao, M., Wang, P., Jiang, L., Wang, B., Yao, Y., Liu, S., Chu, D., Cheng, W., & Lu, Y. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03911j · Cited by 343
Fukuda, K., & Someya, T. (2017) · Advanced Materials · doi:10.1002/adma.201602736 · Cited by 317
Additive Manufacturing of Batteries
Pang, Y., Cao, Y., Chu, Y., Liu, M., Snyder, K., MacKenzie, D., & Cao, C. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201906244 · Cited by 298
Chen, H., Cao, Y., Zhang, J., & Zhou, C. (2014) · Nature Communications · doi:10.1038/ncomms5097 · Cited by 274
Large‐Area Compliant Tactile Sensors Using Printed Carbon Nanotube Active‐Matrix Backplanes
Yeom, C., Chen, K., Kiriya, D., Yu, Z., Cho, G., & Javey, A. (2015) · Advanced Materials · doi:10.1002/adma.201404850 · Cited by 236
Solution-Processed Carbon Nanotube True Random Number Generator
Gaviria Rojas, W. A., McMorrow, J. J., Geier, M. L., Tang, Q., Kim, C. H., Marks, T. J., & Hersam, M. C. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b02118 · Cited by 48
Self-citation
Metadata
- Authors
- Ha, M., Seo, J.-W. T., Prabhumirashi, P. L., Zhang, W., Geier, M. L., Renn, M. J., Kim, C. H., Hersam, M. C., & Frisbie, C. D.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-02-12
- Volume
- 13
- Issue
- 3
- Pages
- 954-960
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2066854902
- Cited by
- 222
- References
- 0
- FWCI
- 16.58
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.