The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
One-Dimensional Carbon–Sulfur Composite Fibers for Na–S Rechargeable Batteries Operating at Room Temperature
Abstract
Na-S batteries are one type of molten salt battery and have been used to support stationary energy storage systems for several decades. Despite their successful applications based on long cycle lives and low cost of raw materials, Na-S cells require high temperatures above 300 °C for their operations, limiting their propagation into a wide range of applications. Herein, we demonstrate that Na-S cells with solid state active materials can perform well even at room temperature when sulfur-containing carbon composites generated from a simple thermal reaction were used as sulfur positive electrodes. Furthermore, this structure turned out to be robust during repeated (de)sodiation for ~500 cycles and enabled extraordinarily high rate performance when one-dimensional morphology is adopted using scalable electrospinning processes. The current study suggests that solid-state Na-S cells with appropriate atomic configurations of sulfur active materials could cover diverse battery applications where cost of raw materials is critical.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on polymer nanofibers by electrospinning and their applications in nanocomposites
Huang, Z.-M., Zhang, Y.-Z., Kotaki, M., & Ramakrishna, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00178-7 · Cited by 7,556
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Electrospinning of Nanofibers: Reinventing the Wheel?
Li, D., & Xia, Y. (2004) · Advanced Materials · doi:10.1002/adma.200400719 · Cited by 5,521
Electrospinning: A Fascinating Method for the Preparation of Ultrathin Fibers
Greiner, A., & Wendorff, J. H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604646 · Cited by 4,241
Na-ion batteries, recent advances and present challenges to become low cost energy storage systems
Palomares, V., Serras, P., Villaluenga, I., Hueso, K. B., Carretero-González, J., & Rojo, T. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02781j · Cited by 3,564
P2-type Nax[Fe1/2Mn1/2]O2 made from earth-abundant elements for rechargeable Na batteries
Yabuuchi, N., Kajiyama, M., Iwatate, J., Nishikawa, H., Hitomi, S., Okuyama, R., Usui, R., Yamada, Y., & Komaba, S. (2012) · Nature Materials · doi:10.1038/nmat3309 · Cited by 2,270
Wang, H., Yang, Y., Liang, Y., Robinson, J. T., Li, Y., Jackson, A., Cui, Y., & Dai, H. (2011) · Nano Letters · doi:10.1021/nl200658a · Cited by 2,119
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Smaller Sulfur Molecules Promise Better Lithium–Sulfur Batteries
Xin, S., Gu, L., Zhao, N.-H., Yin, Y.-X., Zhou, L.-J., Guo, Y.-G., & Wan, L.-J. (2012) · Journal of the American Chemical Society · doi:10.1021/ja308170k · Cited by 1,644
Sodium and sodium-ion energy storage batteries
Ellis, B. L., & Nazar, L. F. (2012) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2012.04.002 · Cited by 1,460
Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer
Su, Y.-S., & Manthiram, A. (2012) · Nature Communications · doi:10.1038/ncomms2163 · Cited by 1,458
A review of heat treatment on polyacrylonitrile fiber
Rahaman, M. S. A., Ismail, A. F., & Mustafa, A. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.03.023 · Cited by 1,412
Raman microprobe studies on carbon materials
Cuesta, A., Dhamelincourt, P., Laureyns, J., Martínez-Alonso, A., & Tascón, J. M. D. (1994) · Carbon · doi:10.1016/0008-6223(94)90148-1 · Cited by 1,326
Zheng, G., Yang, Y., Cha, J. J., Hong, S. S., & Cui, Y. (2011) · Nano Letters · doi:10.1021/nl2027684 · Cited by 1,295
Organic Electrode Materials for Rechargeable Lithium Batteries
Liang, Y., Tao, Z., & Chen, J. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100795 · Cited by 1,276
Spherical Ordered Mesoporous Carbon Nanoparticles with High Porosity for Lithium–Sulfur Batteries
Schuster, J., He, G., Mandlmeier, B., Yim, T., Lee, K. T., Bein, T., & Nazar, L. F. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201107817 · Cited by 1,114
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Stabilizing lithium–sulphur cathodes using polysulphide reservoirs
Ji, X., Evers, S., Black, R., & Nazar, L. F. (2011) · Nature Communications · doi:10.1038/ncomms1293 · Cited by 864
A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries
Wang, J., Yang, J., Xie, J., & Xu, N. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020704)14:13/14<963::aid-adma963>3.0.co;2-s · Cited by 818
Confining Sulfur in Double‐Shelled Hollow Carbon Spheres for Lithium–Sulfur Batteries
Zhang, C., Wu, H. B., Yuan, C., Guo, Z., & Lou, X. W. (. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201205292 · Cited by 800
High temperature sodium batteries: status, challenges and future trends
Hueso, K. B., Armand, M., & Rojo, T. (2013) · Energy & Environmental Science · doi:10.1039/c3ee24086j · Cited by 774
Yang, Y., Zheng, G., Misra, S., Nelson, J., Toney, M. F., & Cui, Y. (2012) · Journal of the American Chemical Society · doi:10.1021/ja3052206 · Cited by 718
Gao, J., Lowe, M. A., Kiya, Y., & Abruña, H. D. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp207714c · Cited by 600
Rechargeable Lithium Sulfur Battery
Cheon, S.-E., Ko, K.-S., Cho, J.-H., Kim, S.-W., Chin, E.-Y., & Kim, H.-T. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1571532 · Cited by 553
Yin, L., Wang, J., Lin, F., Yang, J., & Nuli, Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03495f · Cited by 484
Development of Sodium‐Sulfur Batteries
Oshima, T., Kajita, M., & Okuno, A. (2004) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2004.tb00179.x · Cited by 351
Lithium–Sulfur Battery Cathode Enabled by Lithium–Nitrile Interaction
Guo, J., Yang, Z., Yu, Y., Abruña, H. D., & Archer, L. A. (2013) · Journal of the American Chemical Society · doi:10.1021/ja309435f · Cited by 343
An Advanced Lithium‐Sulfur Battery
Kim, J., Lee, D. J., Jung, H., Sun, Y., Hassoun, J., & Scrosati, B. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200689 · Cited by 329
Self-citationLithium storage in conductive sulfur-containing polymers
Yu, X.-G., Xie, J.-Y., Yang, J., Huang, H.-J., Wang, K., & Wen, Z.-S. (2004) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2004.07.004 · Cited by 249
Room-Temperature Solid-State Sodium∕Sulfur Battery
Park, C.-W., Ahn, J.-H., Ryu, H.-S., Kim, K.-W., & Ahn, H.-J. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2164607 · Cited by 214
Ryu, H., Kim, T., Kim, K., Ahn, J.-H., Nam, T., Wang, G., & Ahn, H.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.01.109 · Cited by 192
Research on sodium sulfur battery for energy storage
Wen, Z., Cao, J., Gu, Z., Xu, X., Zhang, F., & Lin, Z. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2008.01.070 · Cited by 188
Discharge properties of all-solid sodium–sulfur battery using poly (ethylene oxide) electrolyte
Park, C.-W., Ryu, H.-S., Kim, K.-W., Ahn, J.-H., Lee, J.-Y., & Ahn, H.-J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.11.083 · Cited by 159
Preparation and characterization of carbon-sulfur surface compounds
Chin, H. C. (1981) · Carbon · doi:10.1016/0008-6223(81)90040-3 · Cited by 123
Functionalized Graphene for High Performance Lithium Ion Capacitors
Lee, J. H., Shin, W. H., Ryou, M., Jin, J. K., Kim, J., & Choi, J. W. (2012) · ChemSusChem · doi:10.1002/cssc.201200549 · Cited by 122
Self-citationThe short-term cycling properties of Na/PVdF/S battery at ambient temperature
Kim, J.-S., Ahn, H., Kim, I., et al. (2008) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-008-0504-8 · Cited by 81
Self-citation
Cited by
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Rechargeable Batteries for Grid Scale Energy Storage
Zhu, Z., Jiang, T., Ali, M., Meng, Y., Jin, Y., Cui, Y., & Chen, W. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00289 · Cited by 1,769
Sodium Metal Anodes: Emerging Solutions to Dendrite Growth
Lee, B., Paek, E., Mitlin, D., & Lee, S. W. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00642 · Cited by 940
Peanut shell hybrid sodium ion capacitor with extreme energy–power rivals lithium ion capacitors
Ding, J., Wang, H., Li, Z., Cui, K., Karpuzov, D., Tan, X., Kohandehghan, A., & Mitlin, D. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02986k · Cited by 818
Tao, X., Wang, J., Ying, Z., Cai, Q., Zheng, G., Gan, Y., Huang, H., Xia, Y., Liang, C., Zhang, W., et al. (2014) · Nano Letters · doi:10.1021/nl502331f · Cited by 687
Metadata
- Authors
- Hwang, T. H., Jung, D. S., Kim, J.-S., Kim, B. G., & Choi, J. W.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-09-03
- Volume
- 13
- Issue
- 9
- Pages
- 4532-4538
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W1995269172
- Cited by
- 441
- References
- 37
- FWCI
- 13.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
