The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Hole Selective MoOx Contact for Silicon Solar Cells
Abstract
Using an ultrathin (∼ 15 nm in thickness) molybdenum oxide (MoOx, x < 3) layer as a transparent hole selective contact to n-type silicon, we demonstrate a room-temperature processed oxide/silicon solar cell with a power conversion efficiency of 14.3%. While MoOx is commonly considered to be a semiconductor with a band gap of 3.3 eV, from X-ray photoelectron spectroscopy we show that MoOx may be considered to behave as a high workfunction metal with a low density of states at the Fermi level originating from the tail of an oxygen vacancy derived defect band located inside the band gap. Specifically, in the absence of carbon contamination, we measure a work function potential of ∼ 6.6 eV, which is significantly higher than that of all elemental metals. Our results on the archetypical semiconductor silicon demonstrate the use of nm-thick transition metal oxides as a simple and versatile pathway for dopant-free contacts to inorganic semiconductors. This work has important implications toward enabling a novel class of junctionless devices with applications for solar cells, light-emitting diodes, photodetectors, and transistors.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The work function of the elements and its periodicity
Michaelson, H. B. (1977) · Journal of Applied Physics · doi:10.1063/1.323539 · Cited by 4,289
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Transition Metal Oxides for Organic Electronics: Energetics, Device Physics and Applications
Meyer, J., Hamwi, S., Kröger, M., Kowalsky, W., Riedl, T., & Kahn, A. (2012) · Advanced Materials · doi:10.1002/adma.201201630 · Cited by 1,248
Graphene‐On‐Silicon Schottky Junction Solar Cells
Li, X., Zhu, H., Wang, K., Cao, A., Wei, J., Li, C., Jia, Y., Li, Z., Li, X., & Wu, D. (2010) · Advanced Materials · doi:10.1002/adma.200904383 · Cited by 1,139
Consensus stability testing protocols for organic photovoltaic materials and devices
Reese, M. O., Gevorgyan, S. A., Jørgensen, M., Bundgaard, E., Kurtz, S. R., Ginley, D. S., Olson, D. C., Lloyd, M. T., Morvillo, P., Katz, E. A., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.036 · Cited by 989
Universal energy-level alignment of molecules on metal oxides
Greiner, M. T., Helander, M. G., Tang, W.-M., Wang, Z.-B., Qiu, J., & Lu, Z.-H. (2012) · Nature Materials · doi:10.1038/nmat3159 · Cited by 978
Nature of the use of adventitious carbon as a binding energy standard
Barr, T. L., & Seal, S. (1995) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.579868 · Cited by 792
Kröger, M., Hamwi, S., Meyer, J., Riedl, T., Kowalsky, W., & Kahn, A. (2009) · Applied Physics Letters · doi:10.1063/1.3231928 · Cited by 703
Nature of the Band Gap ofIn2O3Revealed by First-Principles Calculations and X-Ray Spectroscopy
Walsh, A., Da Silva, J. L. F., Wei, S.-H., Körber, C., Klein, A., Piper, L. F. J., DeMasi, A., Smith, K. E., Panaccione, G., Torelli, P., et al. (2008) · Physical Review Letters · doi:10.1103/physrevlett.100.167402 · Cited by 658
Sun, Y., Takacs, C. J., Cowan, S. R., Seo, J. H., Gong, X., Roy, A., & Heeger, A. J. (2011) · Advanced Materials · doi:10.1002/adma.201100038 · Cited by 629
Hybrid Silicon Nanocone–Polymer Solar Cells
Jeong, S., Garnett, E. C., Wang, S., et al. (2012) · Nano Letters · doi:10.1021/nl300713x · Cited by 420
Solution processing of transparent conductors: from flask to film
Pasquarelli, R. M., Ginley, D. S., & O'Hayre, R. (2011) · Chemical Society Reviews · doi:10.1039/c1cs15065k · Cited by 403
Hybrid Heterojunction Solar Cell Based on Organic–Inorganic Silicon Nanowire Array Architecture
Shen, X., Sun, B., Liu, D., & Lee, S.-T. (2011) · Journal of the American Chemical Society · doi:10.1021/ja205703c · Cited by 287
Record High Efficiency Single-Walled Carbon Nanotube/Silicon p–n Junction Solar Cells
Jung, Y., Li, X., Rajan, N. K., Taylor, A. D., & Reed, M. A. (2012) · Nano Letters · doi:10.1021/nl3035652 · Cited by 207
13% Efficiency Hybrid Organic/Silicon-Nanowire Heterojunction Solar Cell via Interface Engineering
Yu, P., Tsai, C.-Y., Chang, J., et al. (2013) · ACS Nano · doi:10.1021/nn403982b · Cited by 205
Meyer, J., Shu, A., Kröger, M., & Kahn, A. (2010) · Applied Physics Letters · doi:10.1063/1.3374333 · Cited by 196
Wei, W.-R., Tsai, M., Ho, S., et al. (2013) · Nano Letters · doi:10.1021/nl401540h · Cited by 179
Zhang, F., Sun, B., Song, T., Zhu, X., & Lee, S. (2011) · Chemistry of Materials · doi:10.1021/cm103221a · Cited by 149
Si/PEDOT:PSS core/shell nanowire arrays for efficient hybrid solar cells
Lu, W., Wang, C., Yue, W., et al. (2011) · Nanoscale · doi:10.1039/c1nr10629e · Cited by 135
Liu, Q., Ono, M., Tang, Z., et al. (2012) · Applied Physics Letters · doi:10.1063/1.4709615 · Cited by 114
Highly efficient Si-nanorods/organic hybrid core-sheath heterojunction solar cells
He, L., Jiang, C., Rusli, R., Lai, D., & Wang, H. (2011) · Applied Physics Letters · doi:10.1063/1.3610461 · Cited by 113
Geometric light trapping for high efficiency thin film silicon solar cells
Escarré, J., Söderström, K., Despeisse, M., Nicolay, S., Battaglia, C., Bugnon, G., Ding, L., Meillaud, F., Haug, F., & Ballif, C. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.10.031 · Cited by 105
Self-citationEfficiency enhancement of graphene/silicon-pillar-array solar cells by HNO3 and PEDOT-PSS
Feng, T., Xie, D., Lin, Y. C., et al. (2012) · Nanoscale · doi:10.1039/c2nr12001a · Cited by 89
Tsai, S.-H., Chang, H.-C., Wang, H.-H., Chen, S., Lin, C., Chen, S., Chueh, Y., & He, J. (2011) · ACS Nano · doi:10.1021/nn202485m · Cited by 86
Si Nanowires Organic Semiconductor Hybrid Heterojunction Solar Cells Toward 10% Efficiency
He, L., Jiang, C., Wang, H., et al. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201838y · Cited by 74
He, L., Jiang, C., Wang, H., et al. (2012) · Applied Physics Letters · doi:10.1063/1.3692590 · Cited by 55
Cited by
High-efficiency crystalline silicon solar cells: status and perspectives
Battaglia, C., Cuevas, A., & De Wolf, S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03380b · Cited by 1,178
Self-citationMolybdenum Oxides – From Fundamentals to Functionality
de Castro, I. A., Datta, R. S., Ou, J. Z., Castellanos‐Gomez, A., Sriram, S., Daeneke, T., & Kalantar‐zadeh, K. (2017) · Advanced Materials · doi:10.1002/adma.201701619 · Cited by 741
MoS2 P-type Transistors and Diodes Enabled by High Work Function MoOx Contacts
Chuang, S., Battaglia, C., Azcatl, A., McDonnell, S., Kang, J. S., Yin, X., Tosun, M., Kapadia, R., Fang, H., Wallace, R. M., et al. (2014) · Nano Letters · doi:10.1021/nl4043505 · Cited by 575
Self-citationEfficient silicon solar cells with dopant-free asymmetric heterocontacts
Bullock, J., Hettick, M., Geissbühler, J., Ong, A. J., Allen, T., Sutter-Fella, C. M., Chen, T., Ota, H., Schaler, E. W., De Wolf, S., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2015.31 · Cited by 565
Self-citationPerovskite Tandem Solar Cells: From Fundamentals to Commercial Deployment
Li, H., & Zhang, W. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00780 · Cited by 524
Metadata
- Authors
- Battaglia, C., Yin, X., Zheng, M., Sharp, I. D., Chen, T., McDonnell, S., Azcatl, A., Carraro, C., Ma, B., Maboudian, R., Wallace, R. M., & Javey, A.
- Venue
- Nano Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-01-27
- Volume
- 14
- Issue
- 2
- Pages
- 967-971
- ISSN
- 1530-6984 (ISSN-L)
- 1530-6992
- OpenAlex
- W2166519846
- Cited by
- 556
- References
- 26
- FWCI
- 28.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.